similar to: Debian - Vlan - Route problem?

Hi, I have configured shorewall 2.0.3-1 on Redhat 9 on my firewall system which is also acting as a gateway for one of subnet to another LAN connected via lease line. LAN1(192.168.5.0/24)----- FW(shorewall) ------- Internet I------------------------LAN2(192.168.2.0/24) Below is the routes Kernel IP routing table Destination Gateway Genmask Flags Metric

Hello, I am new to network routing and I need help configuring a linux box with two ethernet cards. In this case it''s a Linux RH 7.3 box, in a cabinet that already has a couple of Windows servers. The Windows server routing is below as an example. The Linux box has an out-of-band interface at 10.130.36.38 and a public eth at 62.50.8.84. I had to add a route for the private interface so

Hello Samba Gurus, I am running FreeBSD 2.2.6-STABLE and Samba 1.9.18p8. I am unsucessful in logging into the server (from Windows or UNIX using smbclient). I turned the logging to level 10. Here is my info: When I start samba 1.9.18p8: su-2.01# more /var/log/samba.log lp_file_list_changed() file /usr/local/samba/lib/smb.conf -> /usr/local/samba/lib/smb.conf last mod_time: Mon Jun 29

Hi, After reading XenServer documents and debugging, I found the previous configuration is correct, here is the one I've configured to work: In XCP, as in XenServer, system's network configuration doesn't really matter, it only make sense before XCP starts and handles the network settings. So there is no need to configure VLAN on host machine, and you only need a minimal one active

My current route for a box shows this: route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 24.123.23.168 0.0.0.0 255.255.255.248 U 0 0 0 eth2 74.223.8.176 0.0.0.0 255.255.255.240 U 0 0 0 eth1 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0

Hi I have problems with shaping traffic running through a VLAN. I have done the following set up: I have a linux box a gateway. I wish to use VLAN on the internal interface (eth0). eth1 is connected to the internet. I will like to be able to shape the dowstream traffic. I have set up the followingon the gateway: vconfig add eth0 10 tc qdisc add dev eth0.10 parent root handle 1: htb default 2

Hello to everyone, Here is the situation: [LAN1]---[eth3]/----------\ | LinuxBR |[eth2]---[LAN0]---[linuxGW]---[internet] [LAN2]---[eth4]\----------/ Whole LAN is in subnet 10.0.0.0/24. So I need: LAN0, LAN1, LAN2 could not see each other. LAN0, LAN1, LAN2 is in same subnet (10.0.0.0/24). All LANs have to get only internet. How can I configure LinuxBR to do so?

Dear, "InetBoot for x86&x86_64 LiveCD (Fedora/Ubuntu/KNOPPIX/VMKnoppix)" is released. HP: http://openlab.jp/oscircular/inetboot/ Guide-PDF: http://openlab.jp/oscircular/inetboot/InetBoot080731E.pdf We prepared the InetBoot scripts for "gPXE" and "syslinux". Please boot them from the shell-mode of gPXE and syslinux. Example: gPXE> dhcp net0 gPXE>

I have 2 machines running centos. each machine has 2 network cards. Box 1: eth1: T1 connection 74.X.X.X eth0: office connection 192.X.X.X Box 2: eth1: Cable modem 24.X.X.X eth0: office connection 192.X.X.X How do I issue a route command on each box so it will use eth0 as the shortest route between the two boxes??? Thanks, Jerry -------------------- On Box1 the route is: [root at mndemo ~]#

Package: src:xen-api Severity: wishlist I've tried to configure VLAN using XCP + openvswitch using Wheezy, though it's still not fully working, I think VLAN configuration on dom0 can be better documented. It's fair easy to configure VLAN in Debian. First you need to ensure that your physical switch is in trunk mode, which means it will pass all kinds of VLAN tagged network flow, and

Hi all, I created a two node cluster that manages virtual machines with two servers connected via a cross cable on the network 10.0.0.0/24. I want that machines that runs on different servers in the network 172.16.0.0/24 can see all the others. To make this possible I've configured a vlan on each server: ... ... 5: eth1.111 at eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc

Hello all, I am running * 1.2.6 I have 2 linksys PAP2 with two phones each. Until recently all was good. on Friday I was running 1.2.5 when I added the fourth phone. I have to admit to initially wiring the rj11(crossed wires) wrong the first time but other than that nothing I can think of. Added the appropriate entries in sip.con and on the PAP2. I then tried to call from one line to the

Hi I''m testing around with xen 3.0 snapshot from last week. And i''m now having a problem with a xenbr which is based on a vlan if (dot1q). this is all in dom0 os: debian testing network: tg3 I can start the bridge based on my normal physical eth0 which is working without any problems. My clan without bridge is also working. I can start the bridge based on a vlan if with help

Hello all: For fun, I am learning about Asterisk, and trying to get Asterisk working at my house. I installed Asterisk@Home. It seems to be functioning fine. I installed a couple of softphones, and have them registered with Asterisk. I actually work for a CLEC, and I have registered my Asterisk box with SER (which I don't begin to understand yet) at the office. In order to try to

Dear, "InetBoot for x86&x86_64 liveCD (Debian-Lenny-Beta1/Feora/Ubuntu/KNOPPIX/VMKnoppix)" is released. We offered gPXE scripts to boot InetBoot itself from the Internet. HP: http://openlab.jp/oscircular/inetboot/ Guide-PDF: http://openlab.jp/oscircular/inetboot/InetBoot080925E.pdf Sample CD: http://ring.aist.go.jp/archives/linux/oscircular/iso/inetboot-20080925-us.iso

Hi Jeremy, I have done a CVS checkout today, built and installed and got new errors (e.g. string overflow): making subnet name:192.168.1.200 Broadcast address:192.168.1.255 Subnet mask:255.255.255.0 [2003/08/28 09:51:04, 2] nmbd/nmbd_subnetdb.c:(172) making subnet name:UNICAST_SUBNET Broadcast address:0.0.0.0 Subnet mask:0.0.0.0 [2003/08/28 09:51:04, 2] nmbd/nmbd_subnetdb.c:(172) making

That was my initial setup before trying the abbreviations, but anyway: [root at plexvm ~]# nano /etc/fstab [root at plexvm ~]# cat /etc/fstab # # /etc/fstab # Created by anaconda on Fri Apr 3 14:02:23 2020 # # Accessible filesystems, by reference, are maintained under '/dev/disk/'. # See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info. # # After editing this file,

Hi there, I am trying desperatly to register my WiFi Phone UTStarcomm F1000 with my asterisk server. I already changed the name of the user to "anonymous" since it looks like the phone sends that name. The WiFi Phone's IP is 192.168.1.217, the asterisk server's IP is 192.168.1.200 What is it that I am missing? Any help very much appreciated!!! The error message I get is: Jan

Hi, There seems to be a problem with the timer resolution on x86_64. This is clear in ping results - I don't know if it's just a ping problem or if it manifests elsewhere as well. It does also affect mtr and traceroute times. I guess it's more a kernel issue than a CentOS problem, but is anyone else seeing the same? Ping results have a resolution of 10ms - so a ping <10ms

On 4/3/20 12:48 PM, Patrick DERWAEL wrote: > User & pass are present > According to the man pages, workgroup is supported > I have changed it to domain, but that didn't change a thing > > [root at plexvm ~]# cat /etc/fstab > > # > # /etc/fstab > # Created by anaconda on Fri Apr 3 14:02:23 2020 > # > # Accessible filesystems, by reference, are maintained