similar to: OT - Differences between Aastra 6730i and 6750i series

Hi Guys, Running Asterisk v1.4.26 (Elastix flavour) and have Aastra 9480i, 6757i, and 6730i, but none of them indicate the voic-email. Where should I look for trouble to find the root issue for MWI? Thanks, -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20100714/d268d1f8/attachment.htm

We are installing Aastra phones (480's and 57i's) into a fairly simple asterisk setup. Although call park & pickup work fine using xfer to 700 (to park), dial 701 (to pickup), we are unable to make the park/pickup softkey feature work on the aastra's. Although we've programmed the softkeys per the manuals, they seem to have no effect (just dead). For example, our 57i is

Hello all, Just wondering if anyone ever solved the Aastra 50-BLF limit when used with Asterisk (any flavour)? I know it's not strictly and Asterisk question - but I'm sure there's plenty of you out there using Aastra's on the end. Cheers, Andrew Thomas dCAP #1473

Fellow list members, I have run into an issue where I encounter a delay at the beginning of a phone conversation when I make outgoing calls through Asterisk with an Aastra 9133i hardphone. This is most noticable when I call a voicemail system with the Aasta and then with a land line or other VoIP phone. The first word or two of the voicemail message is generally cut off. According to

Hello all, Our setup consists of an asterisk server (version 1.4.8 ) with a TDM400 card (4 FXO ports) and about 10 aastra 5Xi phones (2 phones are 57i and the rest 55i). The asterisk server is also configured with two SIP trunks. The problem that we're having is that if at any time there is an internet connection interruption to the asterisk server all the aastra phones freeze. If we disable

Getting "no service" display on aastra 480i. Sip debug shows an "unathorized" blub when the aastra tries to register. Some reading indicates that 1.4 firmware wants aastra.cfg and mac.cfg in /tftpboot/. There are none. Anyone have basic config files? Or can point me to a good link? All links I have tried, that purport to have config files, are either dead or error out.

I have ADSI working on my Aastra (Vista/Nortel) 350 phone and everything is working fine. However, I want the asterisk.adsi to load into the 'self-load' slot but can't figure out what the correct FDN for doing this is. Does anyone know the right FDN for the SL slot on these phones? Also, does anyone have any cool/interesting ADSI scripts they wouldn't mind sharing? I'm

hi i've got an AAstra 9133i ip phone, when i've bought it, i've set it to use a SIP/400 account on my asterisk, then, i've changed settings and i've set set phone to use a SIP/500 account . now, when i connect the phone to tthe network, it register itself on asterisk with both accounts!!! -- Registered SIP '500' at 192.168.100.188 port 5060 expires 120 --

Are the cordless phones on the 480i CT from Aastra registered independently in Asterisk? Such that if I have 5 of the cordless phones hooked up, each one is it's own "extension?" ________________________________ This e-mail, facsimile, or letter and any files or attachments transmitted with it contains information that is confidential and privileged. This information is intended

Hi, I can't find a way to tailor DHCP/TFTP/HTTP environment so that brand new Aastra SIP phones can be auto-provisioned when config files are stored in a specific TFTP subdirectory instead of TFTP root directory. For instance, TFTP root directory is /srv/tftp. When config files are stored in /srv/tftp, a new Aastra can find its config files. When config files are stored in /srv/tftp/aastra,

hello list i need your help please regarding an issue with snom300 and aastra6731i using asterisk 11.13.0 asterisk snom 300 8.7.3.25 astra 6731i 2.6.0.2019 i have configured the trunks like below 100 in snom300 200 in snom300 300 in aastra6731i 400 in x-lite the calls between x-lite and aastra ====ok inbound and outbound the calls between x-lite and snom300====> ok inbound and

I recently tried to update my Aastra 57i to version 3.2 and ran into a problem. It won't properly register and says "contact mismatch". I added "sip contact matching: 2" to aastra.cfg, but that didn't help. When I look at the SIP trace, but I see is the Aastra sending a REGISTER and Asterisk replying with the 401. The phone then sends the REGISTER again, this time

> > Allen Casteran wrote: > > Anyone know what the POE draw is for the Aastra 480i phones? > > We have switches that will do 15 watts on 12 ports but only do 7.7 watts on all 24 ports. > > A Cisco 3560 switch will do 15.6 watts on all 24 ports. > > Just trying to find out if we need that much power. > Drew wrote: > According to Aastra tech support, 5 watts

There is no release note, just a text file that says AASTRA TELECOM INC. February 2006 FC-000046-01-07.st - 9133i Generic SIP Firmware 1.3.1.1095 for customer release. ________________________________ From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Gareth Owen Sent: 15 February 2006 02:00 To: asterisk-users@lists.digium.com

I just noticed the Aastra 57i do something that I haven't seen before. I called from one phone (phone 1) to the 57i. I answered it. Then, I pressed Transfer and dialed the extension for the third phone (in this case a Cisco 7960 in Sip). I did not answer the Cisco, but noticed the caller ID was showing the Aastra (as expected). I hung up the Aastra to complete the transfer and noticed the

Hello everybody, I'm having issues with calls being dropped on Aastra phones, when the call is on hold. Tested with models 6863i and 6867i. I've figured that the call is dropped by Asterisk when it reaches the rtpholdtimeout limit. I've reported the issue to Aastra, asking them to implement some kind of "RTP keep-alive" feature on their phones. Maybe the phone could send

hello i hope i am posting to the right list, i am a totally blind user, and i want to reprogram my aastra pt 480e phone, my friend used the web configurator, but i think he programmed thw wrong codes, a few questions, is it possible to damage the phone by programming it wrong? also, how does one reset it literally to factory defaults? as unplugging it and replugging it back into the wall

Does anyone have success in upgrading Aastra/Sayson 480i CT firmware? All I get, no matter what I've tried is "Unable to upgrade firmware". tftpd is working because the dialplan freshens, and I have aastra.cfg whatevermacaddressfile.cfg and firmware.st in /tftpboot Am I missing something stupid? Is there another way to upgrade it? Chris Coulthurst chris@shuksan.com

Hi, I`ve been toying with an Aastra phone (9143i) wondering if it could be a good alternative to to the more expensive Polycom phones. One thing which I can't figure out, although it certainly looks simple, is to update the firmware though FTP (not TFTP). I have set the ftp provisioning server in the Aastra phone, and put the firmware file 9143i.st in the root folder where the

Anyone know what the POE draw is for the Aastra 480i phones? We have switches that will do 15 watts on 12 ports but only do 7.7 watts on all 24 ports. A Cisco 3560 switch will do 15.6 watts on all 24 ports. Just trying to find out if we need that much power. Can't seem to find any info on the Aastra site. Comments?