similar to: arm: network throughput decreases 5Mbps (Arndale Exynos5250)

Hi, Now that the Arndale board is supported in upstream Xen I don''t get any output on the serial console. I followed the instructions on the wiki with no luck: The xen repository I''m using is: git://xenbits.xen.org/xen.git last commit: 61c6dfce3296da2643c4c4f90eaab6fa3c1cf8b3 The linux repository is: git://xenbits.xen.org/people/julieng/linux-arm.git last commit:

Hello, I am trying to boot Arndale board with Julien''s new XenARM patch series. But I have got "Data Abort" while in booting. My environment is: - Arndale Board - Xen-4.3-unstable from branch "arm" in git://xenbits.xen.org/people/julieng/xen-unstable.git - Dom0 Kernel from branch "dev-arndale-dom0-3.9" in

Hi Xen Developers, I had tested new XenARM for Arndale board that is updated in Anthony''s tree from 2 days ago. I expected that will be working. But, I can not boot Dom0 Kernel. I used kernel and XenARM both are from Xen Wiki(http://wiki.xen.org/wiki/Xen_ARM_with_Virtualization_Extensions/Arndale). It (seems) stopped after "(XEN) Freed 212kB init memory" message. When I

Dear all, I followed the steps described in the wiki in order to get an Arnadle board running Xen, but I''m having trouble in starting a domU. Let me describe you the steps I followed. Sorry for such a long mail, but I think that a verbose description is necessary so you can point me what I''m doing wrong. I couldn''t boot properly over the network. This is why I

2013/10/29, mail fetch <fetchmail.0104@gmail.com>: > Hi all, > > I just saw a know bug from wiki that network doesn''t work in guest in > arndale board : > > Network doesn''t work in the guest > > Contact: julien.grall@citrix.com > Status: In progress > Description: Network doesn''t work in the guest when an ehternet cable is > plugged

We need to write the irq number to GICC_DIR on the physical cpu that previously received the interrupt, but currently we are doing it on the pcpu that received the maintenance interrupt. As a consequence if a vcpu is migrated to a different pcpu, the irq is going to be EOI''ed on the wrong pcpu. This covers the case where dom0 vcpu0 is running on pcpu1 for example (you can test this

Guys, Could you please clarify if SMP available for XEN on ARMv7 with virtualizations extensions? Browsing through stuff for Arndale I do see enabling secondary CPU on XEN site and SMP enabling on dom0 kernel site. But I do not see SMP infrastructure implementation on the XEN site. Sincerely, Andrii Anisov. _______________________________________________ Xen-devel mailing list

If the vgic needs to inject a virtual irq into the guest, but no free LR registers are available, add the irq to a list and return. Whenever an LR register becomes available we add the queued irq to it and remove it from the list. We use the gic lock to protect the list and the bitmask. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> --- xen/arch/arm/gic.c |

During context switch is_running is set for the next vcpu before the gic state is actually saved. This leads to possible nasty races when interrupts need to be injected after is_running is set to the next vcpu but before the currently running gic state has been saved from the previous vcpu. Use current instead of is_running to check which one is the currently running vcpu: set_current is called

Hello, We have built a couple of CentOS 5.5 systems on the Intel DH67BL (Sandy Bridge) motherboard and overall they work pretty well. I'm having one problem which keeps cropping up and that is an error message that says: IRQ 177 nobody cared (try booting with the irqpoll option) report bad irq, references CPU idle then it references usb_hcd_irq and e1000_intr then it disables the add-on

U-boot for the arndale board splits the memory in 8 contiguous banks and rewrites the memory node. So most of the memory is lost. As the frametable is only able to handle contiguous memory, use the first contiguous banks and warn if some of the memory banks are not used. Signed-off-by: Julien Grall <julien.grall@linaro.org> --- xen/arch/arm/setup.c | 23 +++++++++++++++++------ 1 file

>------- Original Message ------- >Sender : Julien Grall<julien.grall@linaro.org> >Date : 2013-10-07 21:49 (GMT+09:00) >Title : Re: [Xen-devel] [PATCH v4 1/9] xen/arm: Implement hvm save and restore > >On 10/04/2013 05:43 AM, Jaeyong Yoo wrote: >> Implement save/restore of hvm context hypercall. In hvm >> context save/restore, we save gic, timer and vfp

Trap guest WFI, block the guest VCPU unless it has pending interrupts. Awake the guest vcpu when a new interrupt for it arrrives. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> --- xen/arch/arm/domain_build.c | 2 +- xen/arch/arm/traps.c | 6 ++++++ xen/arch/arm/vgic.c | 4 +++- 3 files changed, 10 insertions(+), 2 deletions(-) diff --git

I have some new PC hardware I'm using with the Intel H67 chipset. I created a bzImage I use for a PXE environment for a recovery mode, installing OS images, etc. The new mobo doesn't have a VGA port but instead DVI. Everytime I unplug the DVI cable it seems to cause "Disabling IRQ #11". After that the PC is basically unusable. The /proc/interrupts shows that hdd, usb, nic,

George has release acked all of these. Otherwise mostly minor updates this time around. Summary: A == acked, M == modified A xen: arm64: Add 8250 earlyprintk support A xen: arm64: Add Basic Platform support for APM X-Gene Storm. A xen: arm64: Add APM implementor id to processor implementers. M xen: arm: add a quirk to handle platforms with unusual GIC layout A xen: arm: allow platform

Hi all, this small patch series implement guest SMP support for ARM, using the ARM PSCI interface for secondary cpu bringup. Stefano Stabellini (4): xen/arm: basic PSCI support, implement cpu_on xen/arm: support for guest SGI xen/arm: support vcpu_op hypercalls xen: move VCPUOP_register_vcpu_info to common code xen/arch/arm/domain.c | 66 ++++++++++++++++++++++++

These series patch enable Allwinner A31(code name sun6i) support in assemble. with these patches, the cpu 0 of sun6i SOC could successful boot into the c environment. Bamvor Jian Zhang (4): xen/arm: introduce Cortex-A7 support xen/arm: introduce Allwinner sun6i SOC basic support xen/arm: enable early printk for sun6i xen/arm: enable switch to hyper mode for sun6i xen/arch/arm/Rules.mk

Below is a kernel dump that I just got. This is a fresh new install of centos 5.1 on NVIDIA gigabyte MB-GA-M61P-S3. nothing extra has been added. I have not tried the irqpoll but I am surprised to get this. Also the machine keeps running just hod this show on the console... Any ideas??? Jerry Jan 8 05:20:00 localhost kernel: irq 169: nobody cared (try booting with the "irqpoll"

(moving to xen-devel, xen-arm is for the older PV ARM port) On Tue, 2013-06-25 at 23:59 +0000, Eric Trudeau wrote: > Hi, I am trying to build the XEN tools for our port of XEN to our > Cortex A15-based platform. > > I am using the repo at git://xenbits.xenproject.org/xen.git to > cross-compile the tools into our rootfs. Which branch/changeset are you using? I've heard that