Dear all,
I followed the steps described in the wiki in order to get an Arnadle
board running Xen, but I''m having trouble in starting a domU. Let me
describe you the steps I followed. Sorry for such a long mail, but I
think that a verbose description is necessary so you can point me what
I''m doing wrong.
I couldn''t boot properly over the network. This is why I modified the
boot script so everything was loaded from the microSD (assuming it only
contains one partition, which starts at sector 10240 and has all the
necessary files in it at its root, along with the filesystem). To
achieve it, simply take the source file I attach in this mail and
convert it to an img file with:
/mkimage -T script -C none -d load-xen-mmc.scr.txt load-xen-mmc.img/
Then set up the environment variables in the board with:
/setenv xen_addr_r 0x50000000//
//setenv kernel_addr_r 0x60000000//
//setenv dtb_addr_r 0x42000000//
//setenv script_addr_r 0x40080000//
//
//setenv bootcmd_load_linux_mmc ''ext2load mmc 0:1 $kernel_addr_r
/zImage''//
//setenv bootcmd_load_xen_mmc ''ext2load mmc 0:1 $xen_addr_r
/xen-uImage''//
//setenv bootcmd_load_dtb_mmc ''ext2load mmc 0:1 $dtb_addr_r
/exynos5250-arndale.dtb''//
//setenv bootcmd_load_script_mmc ''ext2load mmc 0:1 $script_addr_r
/load-xen-mmc.img''//
//
//setenv bootcmd ''run bootcmd_load_script_mmc; source
$script_addr_r''//
//setenv xen_bootargs ''sync_console console=dtuart
dtuart=/serial@12C20000''//
//setenv dom0_bootargs ''console=hvc0 ignore_loglevel psci=enable
clk_ignore_unused root=/dev/mmcblk1p1 rw rootwait earlyprintk''/
Save the changes with saveenv and simply boot.
At this point, I was able to launch the kernel and Xen successfully, and
to log into the dom0. I couldn''t find any reference on the exact steps
to follow in order to be able to execute the "xl" command properly, as
the wiki only says that a native compilation of the tools is necessary.
So, what I did was to copy the xen source code in the board and compiled
it with "make install-tools" (after running ./configure and installing
the required packages).
I had to modify some library paths (apend "include /usr/local/lib/" to
/etc/ld.so.conf and run ldconfig), start xencommons manually
(/etc/init.d/xencommons start) and finally I''ve been able to run
"xl
list". Nevertheless, when xencommons is started, it outputs:
/
//root@arndale:/# /etc/init.d/xencommons start//
//Starting C xenstored...WARNING: Failed to open connection to gnttab//
//Setting domain 0 name...//
//Starting xenconsoled...//
//Starting QEMU as disk backend for dom0//
///etc/init.d/xencommons: line 120:
/usr/local/lib/xen/bin/qemu-system-i386: No such file or directory/
At this point, xl list displays:
/root@arndale:/# xl list//
//Name ID Mem VCPUs
State Time(s)//
//Domain-0 0 128 2 r-----
309.8/
Then I tried to create the VM described in the wiki, but to no avail. I
copied all the necessary files, concatenated the domU kernel with the
xenvm dtb, but in the end I get the following output:
/
//root@arndale:~# xl create -c vmDescriptor.cfg //
//Parsing config from vmDescriptor.cfg//
///etc/xen/scripts/block: line 3: dirname: command not found//
///etc/xen/scripts/block: line 4: /block-common.sh: No such file or
directory//
///etc/xen/scripts/block: line 208: xenstore_read_default: command not
found//
//libxl: error: libxl_exec.c:118:libxl_report_child_exitstatus:
/etc/xen/scripts/block add [15289] exited with error status 1//
//libxl: error: libxl_create.c:935:domcreate_launch_dm: unable to add
disk devices//
///etc/xen/scripts/block: line 3: dirname: command not found//
///etc/xen/scripts/block: line 4: /block-common.sh: No such file or
directory//
///etc/xen/scripts/block: line 208: xenstore_read_default: command not
found//
//libxl: error: libxl_exec.c:118:libxl_report_child_exitstatus:
/etc/xen/scripts/block remove [15297] exited with error status 1//
//Aborted/
Could you please tell me what is happening? Is there a step I''m not
taking into consideration?
Many thanks. Best regards,
Josep Subirats
WARNING / LEGAL TEXT: This message is intended only for the use of the
individual or entity to which it is addressed and may contain
information which is privileged, confidential, proprietary, or exempt
from disclosure under applicable law. If you are not the intended
recipient or the person responsible for delivering the message to the
intended recipient, you are strictly prohibited from disclosing,
distributing, copying, or in any way using this message. If you have
received this communication in error, please notify the sender and
destroy and delete any copies you may have received.
http://www.bsc.es/disclaimer
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel