similar to: Looking for xen and networking expert to resolve an issue on my server (PAID)

Hi all. We're looking for a Samba expert in Sydney to come on-site and perform a Vampire from an NT4 domain controller ( which is dying ) to a new Ubuntu system which will then act as a domain controller. I've tried doing a vampire of this system before and not had much success. I don't have time to do it now, as I'm leaving this job in 5 days, and we want to get things off the

Hi all, I have a question on /etc/inittab for DomU booted with xencons parameter. I saw the following error messages when I appended xencons=ttyS to DomU boot option. INIT: Id "1" respawning too fast: disabled for 5 minutes INIT: Id "2" respawning too fast: disabled for 5 minutes INIT: Id "4" respawning too fast: disabled for 5 minutes INIT: Id

Hi, after 2 years of "pure" LXC usage, I'm trying now to administrate our LXC containers with libvirt No problem with a LXC container I create "from Scratch" (lxc-create), but with our existing containers, I've a strange behavior with the console: vsonde43 login: Debian GNU/Linux 5.0 vsonde43 console vsonde43 login: Debian GNU/Linux 5.0 vsonde43 tty1 vsonde43 login:

Hello all, I recently started seeing these messages on the consoles of three production Centos 5.2 servers. They have been occurring nonstop for the past few days and show up routinely every five minutes. INIT: Id "snmp" respawning too fast: disabled for 5 minutes INIT: Id "snmp" respawning too fast: disabled for 5 minutes INIT: Id "snmp" respawning too fast:

Hi, This is my setting: I have a Logical Volume /dev/VG/suse with Suse installed. I have added it to the grub and I can boot it and works perfectly fine. Now I am running /dev/VG/root which is running Xen0. I have created a Xen config file to boot a VM with disk: /dev/VG/suse. In other words I want to boot /dev/VG/suse as a virtual machine. Below is what I am getting at boot time :

Hi Pasi, if I don''t change the tty to hvc it will stopped on Kernel 2.6.31.13 on i686 (console) localhost login: root Kernel 2.6.31.13 on i686 (console) localhost login: root Kernel 2.6.31.13 on i686 (console) localhost login: root After I change it to hvc0 followed the twiki page the log is Remounting root filesystem in read-write mode: [ OK ] Mounting local filesystems: [ OK

Hello All I just recently adopted a server with Gentoo/Xen as domain0 server with several domainUs attached to it. Please forgive my xen-noobness, but I was hoping that someone can help me out. These images have not been updated in a long time, and I''m trying to get all the domainUs updated with their appropriate services patches, etc. I''m currently working on one Gentoo

Hi Daniel, Yes, thanks and I should have mentioned that I am using pretty much the same thing you suggested on my routers, but for whatever reason couldn?t get that approach working on the linux box in question. Mark, Thanks for the upstart script. I had tried to do the same myself but couldn?t get my upstart script to work right. I was missing the ?-D? flag in my script. Added that and now

Hi, I''m trying to run Xen 3.0 with a file-backed VBD on a opteron system. Here''s my Xen config file (xenconf): # -*- mode: python; -*- kernel = "/boot/vmlinuz-xen" ramdisk = "/boot/initrd-xen" memory = 1024 name = "Dom2" vif = [ '''' ] disk = [ ''file:/xendisk/vm3disk,sda1,w'' ] root = "/dev/sda1

I have 2 HP Proliant 365 G5 servers with PCI-E risers. I bought a Digium TE121B single port card. When installing the card, the slot on the card doesn't quite line up with the tab in the PCI-E slot. If I loosen the front plate on the card, Ican sort of make it plug in, however, the card won't go in far enough to screw down the plate. I tried the card in the other server and had the same

Hi i need to implement "Inward" SIP usring dialing in my Asterisk IPpbx, So anybody can recah me by dialing my SIP uri. same time my DNS on same server where currently Asterisk running. how ican implement this. Please help me with config details at DNS & Asterisk point of view. anybody can provide me config exmple? I am using Asterisk 1.4.9. Plz help me Regards Amit

Dear all, using LinNeighborhood I can view and access all share folders of windows PC. From Network Neighborhood windows Ican see Samba but can't access. Error message is "Network Path was not found". I try using net view \\samba get same error message.

Guys (and Gals), FYI I also have the *same* message here. Wonder is it is related to my Compaq D500 Space Saver PIV 1.7 or the fact that I don't yet have a modem card in the * box. (Please don't shoot me, did try Google first) Many thanks, Wagner Gimenes -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf

Hello all, I'd like to connect to a CentOS 5.2 system's console through a null-modem cable. An USB to serial converter is connected to that system's USB port. When using this configuration statement in "/etc/inittab"... ... # Run gettys on serial line (that is, a serial line connected to USB0) usb0:12345:respawn:/sbin/agetty -L ttyUSB0 9600 vt100 ... ...I get these

I've figured this one out... Just wanted to get it into the dovecot mailing list archive so that somebody in the future might find it if they need it. Running Dovecot on Mac OS X 10.4.11 and using LaunchDaemon to start. Following a system crash, dovecot failed to restart with this in the system log... Feb 4 10:04:29 G520X2 launchd: org.dovecot: exited with exit code: 89 Feb 4

Hi Folks, I create a file backed vbd to boot a guest VM as described in the Xen''s user manual in section ''Using File-backed VBDs". The Dom0 and the VBD contain Suse Linux Enterprise Server 10 (X86_64). I am not able to boot the guest VM. During the boot process the INIT process generates an error saying <snip> Loading jbd Loading ext3 Waiting for device /dev/sda1 to

I?ve been having the same issue with Ubuntu, thankfully we have access to Upstart: ``` start on (local-filesystems and net-device-up IFACE!=lo) stop on stopping network-services author "Mark Lopez" description "Tinc Upstart Job" version "0.1" env network=master respawn exec /usr/sbin/tincd -n "$network" -D --debug=3 --logfile ``` I removed the default

I am trying, without success, to create an upstart config file to automatically start and restart an ssh proxy. The command sting that I use in the script has been checked and verified from the shell but it fails in the upstart file. The file contents are: . . . # proxy is used to authenticate smtp submissions # so start it before the postfix service starts start on starting postfix # Take

I would like some assistance getting a Polycom IP 500 working with Asterisk. I have dug through the mail-list archives and looked through wiki. I would like some more specific tips/tweaks to get the phone working with all possible features supported. Anyone willing to share their configuration files and advice? I will gladly add to the wiki pages what I have learned so that all can share in

I just installed CentOS 5 on a Sony Vaio V505 (PCG-V505DC2P) and it worked perfectly. A full yum update also worked fine. The user made various changes to it over the weekend, and how I'm faced with trying to undo endless "INIT: Id "x" respawning too fast: disabled for 5 minutes" error messages. I've spent half the day googling various answers. init 5 will not