similar to: E911 Voip Trunking

Does anyone have any experience with any SIP or IAX providers that support E911? I'd love to convert entirely to Asterisk at my house, but the lack of emergency dialing has been a major hold-up for me. Thanks in advance for any suggestions! -- Kyle Sexton

How exactly does Asterisk provide E911 service??

One of my providers has a different SIP account for each number. I have all of my users in one outbound context (caller ID passes fine). How do I ensure that the callers get routed down their correct SIP account with my provider for e911 purposes without each having their own context? ----- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com -------------- next part

I just set up a t1 with 2 camma mf 911 trunks on it, and I am having a issue with it. We can call 911 which is routed out these new trunks, and it goes to the 911 center, but they are not getting the ANI and hence "no record found". Our LEC is Embarq, and they say they can see the call come in and send: KP-911-ST and then KP-0-911-ST rather then KP-0-ANI-ST I turned on all the debug

Hi, We've got a dedicated T1 with two trunks running into our ILECs selective router for 911. Split out of the T1 into two MF CAMA trunks on ILEC side. I'm trying to use asterisks e911 signaling, but I'm having trouble with the dial command. (== Everyone is busy/congested at this time (1:1/0/0)) I'm missing something and I'm thinking it has to do with the hookstate

Ok, So... we've been looking at Intrado as a solution for national E911. They claim to be able to offer FCC compliant E911 services for VoIP companies. However, as I look into things further, they don't seem to have links to all the PSAPs for E911. Now, I understand if the PSAP is not capable of receiving E911 information, the VoIP provider is under no obligation to provide it.

Hi, I'm trying to configure 2 parallel sip trunks between 2 boxes. However I seem to have the problem that when making a call from Box 2 to Box 1, it sometimes says authentication failed because it is using the username of the other trunk. Here's my configuration: Box 1: [dp-dp2] type=peer username=dp-dp2 secret=mysecret qualify=yes host=box.2.ip.address context=from-internal [e911-dp2]

http://www.lightreading.com/document.asp?doc_id=73943&site=lightreading I know e911 has been discussed on ths list before, but I just read this and it got me thinking that if you have a Wholesale VoIP carrier - wouldn't they have to pass e911 on to you as a VoIP provider to, in turn, pass on to your end-users? Of course there would be a fee - just wondering if this is how the

I have a client that would like to use asterisk to link their multiples locations together. However, if a person in the remote office dials 911, How can the 911 operator determine WHERE the emergency is?? Since all calss would be going out of the PRI in the main location, the police/fire trucks will show up at our COLO!! I know that there are some that are doing this multi site setup, how did

We were able to solve the below problem. I'll post it in case someone encounters the same issue. No need to respond or even read unless you see a better way. Thanks - John We have manually set callerID on our outbound lines to reflect the appropriate DID both for e911 and to be polite to folks we call, e.g.: exten => _1NXXNXXXXXX,1,Set(CALLERID(num)=5197546340) exten =>

I believe the 911 is a serious issue if one does an asterisk installation in an office. How do you test 911? Won't they arrest you or something for dialing 911 for no reason and talking to one of their agents who could have taken a more important call? On the other hand what an emergency comes up (like someone got seriously injured) and on top of that asterisk crashed all of a sudden

Greetings to all, Can anyone think of a reason that a Softphone would not be compatible with the F.C.C's order for E911? If the user is able to update their address when they move their laptop, etc.

I have 3 analog trunks zap/1, zap/4 and zap/5. zap/5 is the least used line. Would the following work for 911 calls? [e911] exten => 911,1,ChanIsAvail(Zap/1) exten => 911,2,Dial(Zap/1/911) exten => 911,3,Hangup() exten => 911,102,ChanIsAvail(Zap/4) exten => 911,103,Dial(Zap/4/911) exten => 911,104,Hangup() exten => 911,203,ChanIsAvail(Zap/5) exten =>

I called bandwidth.com to buy a sip line from them for $30 a month. But they said they will not sell me a sip line since the address on the account is Citrus Heights CA and they can not provide services in that area. On asking further the person clarified that there is no e911 service available in the 916 area code for bandwidth.com But other providers like www.broadvoice.com are able to provide

Hi, We have been using Voxbone for some time for origination, and they now offer E911 services.? We are trying to set this up and having trouble meeting their authentication requirements. I setup a peer as I normally would, with user/pass as they supplied ("lacoursj", "pass"), but my calls are rejected.? Their support is asking that I follow this auth mechanism: 1st step

Hi all, I'm working on a script to check the status of streams from multiple streaming sources (ie. icecast, shoutcast, wms, etc.). With Icecast I am looking at the HTTP header returned by the server when I do a GET on the mountpoint I want the status of. It appears that a HTTP/1.0 200 indicates that the mountpoint is up while a HTTP/1.0 404 indicates that it is down. Two questions: 1. Is

Does anyone have any experience getting inbound ANI information from a CAMA/MF/E&M Wink trunk on Asterisk? Is this only do-able with a PRI interface? Any information would be helpful.

Central business location has a PRI with a CLEC. Remote offices access the PRI for all voice traffic via VoIP. How does one get the telco to report the address of a remote office to the 911 call center when the call is made from that respective location?

Can Asterisks properly handle outbound Enhanced 911? Blake

Been working with Asterisk for a long time but this is the first time I have dealt with this issue. I am setting up an Asterisk box (FreePBX not my choice) to interface with an e911 provider. They say their switches only listen for RTP on ports 20000-21001 which is outside the normal range Asterisk listens on 10000-20000. I wish I knew more about this topic but since I have never had an issue