similar to: Strange reboot since 9.1

Hi, I have been trying out a nice new tws controller and decided to enable debugging in the kernel and run some stress tests. With a regular GENERIC kernel, it boots up fine. But with debugging, it panics on boot. Anyone know whats up ? Is this something that should be sent directly to LSI ? pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0

Hello, I think this needs a few more eyes: http://lists.freebsd.org/pipermail/freebsd-scsi/2009-January/003782.html In short, writes are slow, likely do to the write-cache being enabled on the controller. The sysctl used in 6.x to turn the cache off don't seem to be in 7.x. Thanks, Charles ___ Charles Sprickman NetEng/SysAdmin Bway.net - New York's Best Internet - www.bway.net

Hello, There it is, all my computers on FreeBSD 9.1-RELEASE had panic. I can just say there is a problem in the 9.1-RELEASE because I had no panic before. What afraid me is that my production server also panic'ed a few days ago, fortunately it does not appears so often. This is a panic that happened on my desktop computer, with a graphic card. The crash usually appears when X starts. GNU

Hello forum! As the subject indicates, I am trying to make a barplot and would like my column names to be in bold. Is this possible in R without having to make my column names in mtext? Any help would be much appreciated. The code I am using is as follows. par(mar=c(3,8,2,2)) par(adj=.5) par(font=2) par(oma=c(3,3,3,3)) par(xpd=TRUE) Blot<-matrix(c(25.2995, 0.7625, 25.6135, 36.5770,

I''m looking at the newly-orderable (via Sun) STEC Zeus SSDs, and they''re outrageously priced. http://www.stec-inc.com/product/zeusssd.php I just looked at the Intel X25-E series, and they look comparable in performance. At about 20% of the cost. http://www.intel.com/design/flash/nand/extreme/index.htm Can anyone enlighten me as to any possible difference between an STEC

Hi, I have a LSI Logic sata/sas raid running, is there a way to see the state of the volume, like optimal, degraded or resyncing? I've tried several commands with camcontrol but I cant figure it out. -- Peter Ankerst?l peter@pean.org http://www.pean.org/

Hi all ! Thanks for the very good support of Dell R320 hardware, perc H310 is well supported, BCM5720 seems to work correctly and performances are great. The only problem i have found is very strange. The FreeBSD bootloader take many times to load, 30sec-2minutes to boot the kernel and show the bootloader menu. After that, the system boots properly, at a normal speed. Is there any issue or

Hello, When playing a lot Urban Terror, the system panic with ACPI related issues : Fatal trap 9: general protection fault while in kernel mode cpuid = 1; apic id = 01 instruction pointer = 0x20:0xffffffff802c6f15 stack pointer = 0x28:0xffffff80d89ac6c0 frame pointer = 0x28:0x0 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, long 1, def32 0, gran 1

Hello after upgrading to 9.2-release i can see periodical page faults. advises welcome. examples: 1. Fatal trap 12: page fault while in kernel mode cpuid = 5; apic id = 22 fault virtual address = 0x18 fault code = supervisor read data, page not present instruction pointer = 0x20:0xffffffff8051095c stack pointer = 0x28:0xffffff88a9d77800 frame pointer =

Hi, after updating my freebsd amd64 box from 9.1 (r250841) to 9.2-RC (r254276) virtualbox crashes the machine. Seconds after starting VBOX the screen freezes and then reboots (probably a trap, cannot see it, as screen is in graphics mode). The kernel modules of vbox have been recompiled. Going back to 9.1 kernel and matching vbox modules works. In both cases VBOX 4.2.16 is used. cheers, Thomas

Greetings I am having trouble with suspend/resume on my Thinkpad X31, running 7.0-STABLE as of April 23. Any help would be appreciated. First problem: When I run "acpiconf -s3" from mulituser mode, the system suspends immediately, without executing /etc/rc.suspend (which has mode 755); then on resume, I get a panic. Second problem: When the system panics, I don't get a dump (or

Hi all, First, I''ll say my intent is not to spam a bunch of lists, but after posting to opensolaris-discuss I had someone communicate with me offline that these lists would possibly be a better place to start. So here we are. For those on all three lists, sorry for the repetition. Second, this message is meant to solicit help in diagnosing the issue described below. Any hints on

I'm trying to wean myself off the very limited capabilities of Excel and Oo. Currently, I am trying to make a plot showing several values for 2 categories in a dot blot (see http://www.nabble.com/file/p24538360/Picture%2B1.png Picture+1.png except that the x axis should contain the category not a number, which was the only way to coax Excel into displaying a plot like this). I started

Hello, I'm experiencing a kernel panic that appears to be caused by zfs. No errors are making it into /var/log/messages, but here is the error message that appears on my screen after panic (transcribed): panic solaris assert BSWAP_32(sa_hdr_phys->sa_magic) == SA_MAGIC, file: /src/sys/modules/zfs/../../cddl/contrib/opensolaris/uts/common/fs/zfs/sa.c, line 1262 I can reproduce this by

I posted a thread on this once long ago[1] -- but we''re still fighting with this problem and I wanted to throw it out here again. All of our hardware is from Silicon Mechanics (SuperMicro chassis and motherboards). Up until now, all of the hardware has had a single 24-disk expander / backplane -- but we recently got one of the new SC847-based models with 24 disks up front and 12 in the

Hello everybody Unfortunately my problem still doesn't have any solution. But I have an interesting observation. The gateway freezes very quickly, if torrent client programs are running on workstations. I assume the cause of the problem consists in many number of TCP/IP connections that torrent client establishes. Any ideas? Maybe I can tune somehow a TCP/IP via kernel, sysctl or pf settings?

9.2 PRERELEASE (today) / amd64 Hello, I'm seeing a panic while trying to build a poudriere repository. As far I can see it always happens when gam_server is started (ie xfce is running) and under disk load (poudriere bulk build) : (That is something new, the box was pretty stable) the complete crash dump (core.0.txt) is here: http://user.lamaiziere.net/patrick/panic_gam_server.txt Fatal

Hi, I have strange problem when booting FreeBSD-6.x in HP Proliant ML370 G4. The problem is "-" appears on the screen and it never boots unless somebody hits the "Enter" key. Sometimes even PS2 keyboard doesn't respond during that time. Tried with USB keyboard, same problem. The machine has dual Xeon 3.2 GHz, 1GB of RAM and LSI Logic (mpt-5.0.5.20.00 bios) LSI1030-IT

Hi, What would be the proper syntax in a C file, using inline assembly, to load a immediate value into an ARM register using clang & integrated assembler? The following syntax is rejected by LLVM: // clang -target armv7em-none-eabi -mthumb #define CONSTANT 0x1234 void __attribute__((naked)) foo(void) { asm volatile ( "ldr r0, =%0 \n"

Hi, Running 9.2-PRERELEASE #19 r253313 I got the following panic Fatal trap 12: page fault while in kernel mode cpuid = 22; apic id = 46 fault virtual address = 0xffffff827ebca30c fault code = supervisor read data, page not present instruction pointer = 0x20:0xffffffff81983055 stack pointer = 0x28:0xffffffcf75bd60a0 frame pointer = 0x28:0xffffffcf75bd68f0