similar to: Cisco 7942 Connected line ID

Hi, I'm using Asterisk to bridge the incoming call to another destination using the Dial command. However, when an anonymous call comes in then privacy information is not passed into the B Leg. For instance, the Privacy header and P-Asserted-Identity aren't copied to the B Leg. Is there an option to give to the Dial command, or another variable to set, to make Asterisk copy such

Hello, using Asterisk 1.8.12.2 case : I call with my cellphone to our public telephone number Our receptionist answers the incoming call and does an attended transfer to my colleague ( A ) Colleague answers and the receptionist tells him that I am on the other side. Receptionist transfers the call and I am connected to my colleague ( B ) My question is about the CallerID that the

Gentlemen, I have 3 faxes attached to an Asterisk. Fax - SPA2102 - Asterisk. 0851711201 and 0851711290 is on our WAN, no NAT. 0197673581 is outside our WAN and needs to be NAT'ed. Sending a fax from 0851711201 to 0851711290, no problem, switches to T38 and fax goes through. Sending a from 0197673581 to 0851711201, no problem as long as i dont enable T38 on 0197673581. But, if i enable T38

Hi, I've tested 1.8.6.0, 1.8.4.0 and 1.8.0 I can get proper start and answer time but not the end time of call <SIP/11-00000000>AGI Rx << GET VARIABLE CDR(start) <SIP/11-00000000>AGI Tx >> 200 result=1 (2011-12-16 18:34:48) <SIP/11-00000000>AGI Rx << GET VARIABLE CDR(end) <SIP/11-00000000>AGI Tx >> 200 result=1 (2011 12-16 18:34:48)

Hi, Please help me understand the following applications and what are its advantages if we compare between each of them. Asterisk, FreeSWITCH, TrixBox, SER, OpenSER, sipX, CallWeaver, and YATE. Regards, Kaushal -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20120103/ffad2be6/attachment.htm>

Hi, I am trying to write dial plan for sip to auto answer (auto attend) the incoming call to the sip phone. - If i call from sip1 to sip2 then sip2 should automatically answer the call and play some sound file. I am trying to do this but as new to the asterisk dial plan configuration , so not able Todo this. help me if anyone already done this setup. Regards Upendra. -------------- next part

Hi, I am using phpagi for agi scripting. and want to update callerid number but didn't get any success. please help me how to update PHPAGI is new for me. Below is the code which I write. #!/usr/bin/php -q <?php set_time_limit(30); //require(.phpagi.php.); include("phpagi.php"); $agi = new AGI(); //answer the call $agi-> answer();

Hi, I've run into a minor snag trying to pass on CALLERID presence from one Asterisk to another via SIP (both running 13.16.0) I have a PRI coming in PBX_A and PBX_A is connected to PBX_B via SIP. PBX_A gets PRI calls on a 4 port Digium card, and each call naturally has its own callerid values and presence. I pass on those calls to PBX_B via SI, and I'm trying to pass on this

Hello, I have Asterisk 1.6.2.9-2, the directive "sendrpid" does not work! I placed this in my peer: (sip.conf) sendrpid=yes trustrpid=yes or sendrpid=yes trustrpid=no (and restarted Asterisk) and the line "Remote-Party-ID" does not appear in my sip debug! Please help me, Mickael. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I am running asterisk 1.8.14.0, It was running fine for last few days and suddenly crashed today In logs I can see that abrt tried to save the core dump but it couldn't Mar 6 12:11:09 localhost kernel: asterisk[26544]: segfault at 72656d69ac ip 0000000000533c19 sp 00007f7db9ce3af0 error 4 in asterisk[400000+1d1000] Mar 6 12:11:15 localhost abrt[31287]: Saved core dump of pid 26528

Hi all, I have a project for the 3G related, AMR and AMR-WB support. I'm using the client develop suite from the PortSIP(http://www.portsip.com), as their said support the AMR, AMR-WB with RFC4867. Now I have to setup a SIP server/SIP PBX in our Lab for test, does the Asterisk support these codecs and RFC4867 ? If no, there has any plugin to support this ? Also, any other Server/PBX which

> We run a variety of 5000, 6000, and 7000 series Soundstations running > Asterisk 11.6.0 and the phones are at 4.0.3.7562. We do not see these > registration issues. Would you be willing to send the configuration from asterisk for this? This message may be private and confidential. If you have received this message in error, please notify us and remove it from your system. Gyron may

Hi everyone, I am trying to figure out the behavior of trustrpid Basically its not behaving the way I expected it to or maybe I am missing a configuration option or something else. When a call from a phone is sent to the * box it has the following sip headers: From: "From Phone" <sip:1001 at 10.0.0.29>;tag=4bf4bb4e11e92476. Remote-Party-ID: "Cloutier"

Hi, I've two yocto questions about the syntax of dialplan: 1. What's the "official" notation of each line: "=>" or "=" ? In the wiki of Asterisk, I see very often "=>", however, what's the reason for both syntaxes authorized ? Historical ? 2. To write info in logs/console, you have two commands: NoOp and Verbose. Verbose seems to be

Hello Everyone, Our switch is sending P-Asserted info to asterisk however the information is getting removed when asterisk forks the call. Is it possible to have asterisk retain the P-Asserted on the leg. This is quite important for valid functionality of our network. Tried setting `sendrpid = yes` and still same problem. We really don't want to have to `SipAddHeader` as it is already being

We have an inbound PRI connected to our Cisco 3825 router which is then passing the calls to Asterisk as SIP calls. We're getting the CallerID number but not the CallerID name. We are seeing the name in the RPID field with a SIP trace on the Asterisk box but don't understand why it's not registering as the CallerID name. Here is a link to pastebin with the Sip trace. In it you

Hi List, Another dumb conversion question (I hope). I installed 10.0 and copied my 1.4 configuration files over. With a few tweaks everything works great except for 1 feature that I specifically went to 10.0 for. When I do an attended transfer, I still get the receptionists caller ID on the transferred phone instead of the incoming callerID. My assumption is that there is some

Hello everybody I'm trying to enable the Digium res_fax app at my *11.7 Server. a fax show stats comes up with FAX Statistics: --------------- Current Sessions : 0 Reserved Sessions : 0 Transmit Attempts : 0 Receive Attempts : 1 Completed FAXes : 1 Failed FAXes : 1 Digium G.711 Licensed Channels : 1 Max Concurrent : 0 Success : 0 Switched to

Darryl Moore <darryl at moores.ca> schrieb: > Ahh. Seen that before! That suggests to me that you don't have your > sip.conf records setup right. > > What's your sip.conf look like? Well, here what I wrote in my sip.conf: register => 00493511111111:MYSECRET at pbxluca/00493511111111 register => 00493512222222:MYSECRET at pbxfax/00493512222222 register =>

I have service with both VoIPtalk.org and Andrews & Arnold (aa.net.uk). VoIPtalk calls are unauthenticated and reach me fine, but Andrews & Arnold calls are authenticated. The last call I successfully received was on Tuesday afternoon. Initially, A&A were for some odd reason not sending calls to my server, but that has been resolved. The problem now is that the calls fail to