similar to: Configure a FreeBSD firewall to pass IPSec?

Dear List, Need to know if anyone on this list has had any experience with using the Nortel BCM 50 for Call Account Reporting using an IP connection to a Linux / Asterisk interface? Presently, I have a BCM 50 installed that uses a local Lenova Small Form Factor PC with a windows XP / os that quit reporting because of a up-grade to the Nortel reporting software. Nortel support is now telling

Recently configured a client with new server Unfortunately the PDC / Backup Machine is an NT4.0 Machine, {Updated with all current Service packs}\ I configured several departmental servers with FreeBSD & samba, these then push files to the NT Machine for nightly backup, one at a time through perl script. I have also configured a samba server to run WINS and DHCP only, for the network. All

I am looking at setting up the following configuration and any help/input/comments before signing the PRI contracts will be greatly appreciated. PRI Tampa PRI Sarasota PRI <--> Nortel BCM-->Asterisk<------------------>Asterisk<---> I would like to link the Nortel BCM to * using the a digital trunk card. The BCM will

Greetings! Has anyone - or is it even possible to - set up Asterisk with multiple SIP Clients to a Nortel BCM switch? The intent is to set up an Asterisk IVR behind the BCM, have the BCM route calls to Asterisk IVR and then transfer calls to one of two queues in the BCM based on ANI and some database information. The wiki (and Google) only mentions PRI, Line-side T1 or H.323 interfaces to the

Has anyone fed a Nortel BCM from Asterisk? I'm interested in switching our company over, but don't want to replace all the handsets in one fell swoop. I imagine some of the PRI cards can "emulate" a switch? I'd still like to pass CallerID into the Nortel, etc but all the external traffic would be VOIP, not TDM.

I'm looking to build a VoIP solution for 100+ service vehicles that have WiFi hot spots installed (with cellular uplinks). Currently we are trying out Skype wireless handselts and Majick Jack. I'd also like to consider an Open Source solution that can bring the calls back to our data center [possibly integrated without our existing BCM 3.x VoIP PBX]. For hardware someone on the IRC

[ -netters, please Cc me or security@ with replies. ] I'm running into trouble integrating dynamic racoon-based IPSec into a network with ipfw and natd. I need to be able to allow VPN access from any address from authenticated clients. I've got the dynamic VPN working, with racoon negotiating SAs and installing SPs, but the problem is that I can't tell whether an incoming packet on

As a follow-up, I have traced the PRI connection and discovered that calls hung up by a local BCM voice station (analog, digital, whatever) send a disconnect with a clear cause of 1 (Number not assigned) instead of a normal clear cause of 16. Calls forwarded through the BCM disconnect with the normal clear cause. I have kludged up a fix to change all clear causes below 2 to 16 (I placed

I've been trying to look up information on upgrading firmware on a nortel i2004 ip phone. I have this phone leftover from a trial, and it's supposed to be upgradable to current firmwares. Since I also run a DMS I was able to login to nortel's site and get all the firmware files, but All the NTP's regarding firmware upgrading these are how to tell you BCM to send the file to it.

Hello, is it possible to connect a Nortel i2004, (i2002) IP Phone to an * PBX? I have seen on the net that there should be an SIP firmware aviable for the phone, anyone an idea where to get it? Because orginally they use a own protocol to connect to an Meridian, BCM or CSE1K. Another idea is to write a module for * that can handle this protocol. bye SLiME

>I've often wondered whether it would be worth connecting a >very large serial EEPROM to a serial port interface, and >have it effectively appear as a solid state printer, (to >that you could cheaply log to an unmodifyable device). >Has anybody ever tried this? >John. Dot Matrix or an old printer would come in handy here with a (near-)infinite number of paper feed. :-) A

I have a FreeBSD box acting as a firewall and NAT gateway I would like to set it up to transparently pass IPSec packets -- I have an IPSec VPN client running on another machine, connecting to a remote network. Is there a way to do this? I can't find any hints in the man pages.

*I just recently migrated our web server to Red Hat 8.0 running Samba 2.2.7 from FreeBSD 4.2 running Samba 2.2.3a. In windows, a user copy or moves files to there home directory on the server running samba. The file seems to copy or move fine (It is visible when accessing the share from explorer), but if I telnet to the server the file is not in the user's home directory. I have tailed the

SYNOPSIS Erratic red alarm T1 PRI on asterisk, but zttool running concurrently during alarm shows no errors, irq misses, or alarms, on any span. Using asterisk and quad Digium T405P, configured as follows: Span 1 connects to ISDN PRI (fractional 8 B channels, D channel 24). Span 2 connects to T1 Mux and analog stations. Span 3 connects to ISDN PRI Nortel BCM hybrid key system digital trunk.

Team: I have a Linux Server running Debian Testing (2.4.18 kernel) and Samba 2.2.3a-12.1 It's been running GREAT. This is a marvelous product. I have a minor issue, though. 2 of the 14 Win2K (all at SP3 and fully "Windows Updated") will "disconnect" the shares on the Samba server after only a few seconds of inactivity. This isn't typically a problem, except that

Hello, I'm new to asterisk. My company is opening a new office and I'm seriously considering using Asterisk for the phone system. A couple of questions: How does Asterisk compete with the Avaya IP Office or the Nortel BCM systems? I have purchased a Polycom 500 phone but I'm having trouble getting it setup and talking to Asterisk. Is there somewhere that has SIP phone setup

Hi, I'm trying to connect * to Nortel BCM 50, This PBX use H.323 v3 to interface with other PBX. The port use to connect is TCP 1720 but I can't configure this port on my * box. I'm using a H.323.conf file sample to activate the port but the * isn't listening there. Somebody have any idea or tip? This is mi H.323.conf [general] port = 1720 bindaddr =

Hi everyone, I was referred to this mailing list by Richard Mudgett regarding the following thread on Issue Tracker as it's a feature request and not a bug:https://issues.asterisk.org/jira/browse/PRI-170 We've got a Nortel BCM (actually 2 BCM50s and 1 BCM400)... all showing the same problem. When a call comes in the number shows up OK but the name does not. In looking at the ISDN messages

I am an evil M$ MCSE :), who of late is planning on opening his own business... Due to the large cost involved with setting up Win2K server, both Hardware and OS, we are considering a Linux server setup. We have SOME experience with Linux, but were after information specifically on the possible implementation of Win2K Group Policies (as well as 'Domain' Authentication_ for the client

I am having problems in the implementation of a VPN, below made a project of my net: INTRANET (10.0.0.0/24) | 10.0.0.5 xl0 NetBSD IPNAT ( map wi0 10.0.0.0/24 -> 192.168.213.10 ) wi0 192.168.213.10/30 | | Wireless VPN | | 192.168.213.9/30 xl2 FreeBSD NATD ( divert natd all from any to any ) xl0 200.x.x.5/24 | 200.x.x.1/24