similar to: dahdi-channels.conf parameters

I am having a problem with a new PRI turn-up on dahdi 2.5.0 and asterisk 1.8.5 that I have not seen before. The PRI is setup as B8ZS, ESF and the span shows up and ok. This PRI is merely a crossover T1 going into an old DC0 class 5 switch. I am getting the following errors over and over again [Aug 16 10:26:10] NOTICE[8002]: chan_dahdi.c:3043 my_handle_dchan_exception: PRI got event: HDLC Bad FCS

How can we set the CDR Master file to rollover at say 30 Meg and create a new one -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20100827/2e98385f/attachment.htm

Hello list i have an issue with my dahdi_channels.conf in span 1 when i use it like below i can do my outband calls without issue ; Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER) group=0,11 context=from-pstn switchtype = euroisdn signalling = pri_cpe channel => 17-31 context = default group = 63 but when i add in channel 1-15 like: channel => 1-15,17-31 i receive all

Hello- After configuring DAHDI and starting asterisk, I get the following message continuously on the Asterisk console: WARNING[2057]: chan_dahdi.c:4158 pri_find_dchan: No D-channels available! Using Primary channel 16 as D-channel anyway! My card is a D410P configured for E1, only the first span is configured, and configuration snippets are as follows: From /etc/dahdi/system.conf:

On Sat, Jan 17, 2015 at 09:31:33AM +0100, Bertrand LUPART - Linkeo.com wrote: > >>> However, dahdi_genconf keeps finding no span: > >>> What am i missing? > >> > >> It looks like your driver is loaded correctly. My guess would be maybe > >> the dahdi-tools is packaged as an older version that doesn't know > >> about the newer te435

Hi Guys I have a 4 port PRI card that I need to setup each port in their own group. In chan_dahdi.conf I have the following which works for one port How do I add the rest of the ports in their own groups so that I can have different signaling on each? [channels] language=en switchtype=euroisdn pridialplan=unknown resetinterval=600 echocancel=yes echotraining=yes

Hi, I'm getting the following error from an asterisk 1.6.0.9 installation: [May 20 06:07:18] ERROR[18517]: chan_dahdi.c:10515 dahdi_pri_error: Asked to delete sched id -1??? [May 20 06:07:18] ERROR[18517]: chan_dahdi.c:10515 dahdi_pri_error: No more room in scheduler This repeats a few times, then asterisk crashes. I can't seem to locate any info on this error at all. I'm using

Hi, I have a digium card (igium, Inc. Wildcard TE405P quad-span T1/E1/J1 card 5.0V (rev 02)) 4 ports I want to make a loop test between digium card E1 to test the configuration of dahdi What I want to do scenario is I connect port 1 and port4 in the digium card with E1 cable SIPcall-->E1 Digium port 1--->(Loop)E1 port 2---->sip extension local. kindly can any can help me to

Asterisk 16 latest DAHDI 3.0.0 latest Excerpt from chan_dahdi.conf is shown below. I'm trying to enable fax detection on inbound calls so that I can take appropriate action in the dial plan. "dahdi show channel 1" shows "Fax Handled: no". Does that mean that I don't have it configured correctly? [channels] ; Span 1: WCTE2/0/1 "WCTE23X (PCI) Card 0 Span

I am trying to setup Asterisk to act like a PBX connected via a PRI gateway to a voice netowrk where Asterisk is doing outbound overlap dialing for calls that terminate via that PRI. AFter researching through the archives and online dcocs, I thought I had everyting setup right, dialplan configured for '_X!' and the 'overlapdial=yes' in the chan_dahdi.conf file, but when I try and

Hi All This may be a silly question but... I have this dahdi_genconf generated file: ; Autogenerated by /usr/sbin/dahdi_genconf on Fri Jul 4 22:05:29 2014 ; If you edit this file and execute /usr/sbin/dahdi_genconf again, ; your manual changes will be LOST. ; Dahdi Channels Configurations (chan_dahdi.conf) ; ; This is not intended to be a complete chan_dahdi.conf. Rather, it is intended ; to

Dear, I always had one E1 card with one span, so I've never had any problem in set it up through /etc/dahdi/sustem.conf and /etc/asterisk/chan_dahdi.conf because I put span=1. But now I have a PBX with two E1 cards with 4 span (8 span in total). How do I have to define both card in system.conf and chan_dahdi.conf, and how do I have to refer each span to the corresponding card ??? Thanks a

Hi, I running into the following problem on my Asterisk setup: --snip-- [Sep 3 01:40:59] NOTICE[9170] chan_dahdi.c: PRI got event: HDLC Abort (6) on Primary D-channel of span 3 [Sep 3 01:47:07] ERROR[9170] chan_dahdi.c: No more room in scheduler [Sep 3 01:47:07] ERROR[9170] chan_dahdi.c: Asked to delete sched id -1??? [Sep 3 01:47:07] ERROR[9170] chan_dahdi.c: No more room in scheduler [Sep

Hello, I'm having issues connecting throu PRI with the following error "Requested transfer capability: 0x00 - SPEECH" Below are the logs: == Using SIP RTP CoS mark 5 -- Executing [97052660 at voipphones:1] Set("SIP/4856-00000003", "CALLERID(num)=xxxxxxxxx") in new stack -- Executing [97052660 at voipphones:2] Dial("SIP/4856-00000003",

Hello I am trying to configure TE420P but i am confused what to give chan_dahdi :( Below is configuration i am using for TDM400P Please help what changes to make in it... Please provide a link as well [trunkgroups] [channels] ;default for channels switchtype=national rxwink=300 hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes

We have two Asterisk servers. One is a live server supporting our customers, and the other is a backup server that's being upgraded and pressed into service. Both servers have a Digium TE405P T1 card in them, and in order to test the T1 service on the backup server, I've created a T1 crossover cable (as per http://www.voip-info.org/wiki/view/crossover+T1+cable) that goes from port 4 on the

Hi, these are my first steps with DAHDI and I finally managed to get asterisk to load chan_dahdi (after I found out, that I need libpri). But how do I tell chan_dahdi on which isdn numbers it should react? I haven't found a parameter like "incomingmsn" for chan_capi in the documentation. Thanks for your help, Stefan

Dear all, i have a problem with a system running - Ubuntu 10.04 ( all updates done ) - ii asterisk 1:1.8.5.0-1digium1~lucid Open Source Private Branch Exchange (PBX) - ii asterisk-dahdi 1:1.8.5.0-1digium1~lucid DAHDI devices support for the Asterisk PBX I also use freepbx 2.9 for the configuration. Hardware is a Dell R410 and a Digium

4 Port PRI sangoma a104 From: jg [mailto:webaccounts173 at jgoettgens.de] Sent: Wednesday, March 18, 2015 2:09 PM To: Andrew Colin; Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] 4 Port PRI I have a 4 port PRI card that I need to setup each port in their own group. In chan_dahdi.conf I have the following which works for one port How do I add the rest

I have a pretty large setup on one of my customers. Digium TE420B (with echo cancelling module), 3 Xorcom Astribanks with 32 FXS each and 1 Xorcom Astribank with 16 FXO. These FXO ports are NOT used for fax/data transmission, as they are connected to cell phones. Not really related to the issue, but there are also 250 SIP phones. The problem is that fax and dial-up connections are really