Hi Guys I have a 4 port PRI card that I need to setup each port in their own group. In chan_dahdi.conf I have the following which works for one port How do I add the rest of the ports in their own groups so that I can have different signaling on each? [channels] language=en switchtype=euroisdn pridialplan=unknown resetinterval=600 echocancel=yes echotraining=yes ;echocancelwhenbridged=no ;rxgain=0 ;txgain=0 callerid=asreceived musiconhold=default group=1 overlapdial=yes signalling=pri_cpe context=extensions channel => 1-15,17-31 jbenable= yes jbforce= yes jbmaxsize= 120 jbimpl= fixed jbresyncthreshold= 1000 -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20150318/098e52dd/attachment.html>
> I have a 4 port PRI card that I need to setup each port in their own group. > > In chan_dahdi.conf I have the following which works for one port > > How do I add the rest of the ports in their own groups so that I can have different signaling > on each? > > [channels] > > language=en > > switchtype=euroisdn > > pridialplan=unknown > > resetinterval=600 > > echocancel=yes > > echotraining=yes > > ;echocancelwhenbridged=no > > ;rxgain=0 > > ;txgain=0 > > callerid=asreceived > > musiconhold=default > > group=1 > > overlapdial=yes > > signalling=pri_cpe > > context=extensions > > channel => 1-15,17-31 > > jbenable= yes > > jbforce= yes > > jbmaxsize= 120 > > jbimpl= fixed > > jbresyncthreshold= 1000 >PRI or BRI? Which card are you using? Typically the installation script or procedure lets you configure each span. You seem to have 4 spans for either 8 or 128 (EuroISDN) channels. jg -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20150318/effcef09/attachment.html>
4 Port PRI sangoma a104 From: jg [mailto:webaccounts173 at jgoettgens.de] Sent: Wednesday, March 18, 2015 2:09 PM To: Andrew Colin; Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] 4 Port PRI I have a 4 port PRI card that I need to setup each port in their own group. In chan_dahdi.conf I have the following which works for one port How do I add the rest of the ports in their own groups so that I can have different signaling on each? [channels] language=en switchtype=euroisdn pridialplan=unknown resetinterval=600 echocancel=yes echotraining=yes ;echocancelwhenbridged=no ;rxgain=0 ;txgain=0 callerid=asreceived musiconhold=default group=1 overlapdial=yes signalling=pri_cpe context=extensions channel => 1-15,17-31 jbenable= yes jbforce= yes jbmaxsize= 120 jbimpl= fixed jbresyncthreshold= 1000 PRI or BRI? Which card are you using? Typically the installation script or procedure lets you configure each span. You seem to have 4 spans for either 8 or 128 (EuroISDN) channels. jg -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20150318/04b42091/attachment.html>