similar to: driver looking for MAXIM MXE II

Hi! all. I have been reading every mail and news about nut and 06da:0002 Phoenixtec but not found a solution. I have a very nice working ups from: CENER ref: "Active 1000VA 230V 12 CENER" and front logo "LA 900" It has COM3 and USB plugs, I don't know if it needs a standar RS232 I have test with varius drivers in ups.conf [MyUPS] driver = bcmxcp_usb | usbhid-ups |

I recently purchased a UPS from http://www.microcenter.com/product/470131/5E_1,100W_2,200VA_6-Outlet_UPS It's sold as an Eaton 5E 1,100W 2,200VA 6-Outlet UPS SKU: 147140 Mfr Part #: 5E2200USB-LA UPC: 743172064875 "The Eaton 5E is an essential line interactive UPS that provides cost effective and reliable power protection against power outages and bad power quality. Thanks to its small

Hi Charles. I have got this output with driver usbhid-ups ups.conf [Phoenixtec] driver = usbhid-ups vendorid = 06da productid = 0002 port = auto #~ langid_fix=0x0409 desc = "CENER ONLINE 1000VA" # export USB_DEBUG=5 # ./usbhid-ups -a Phoenixtec Network UPS Tools - Generic HID driver 0.37 (2.6.4) USB communication driver 0.32 0.000000 debug level is '3' 0.000557

Hello, I have a Yunto e a Zanto ups connected with usb with id 06da:0002 and 06da:0601. I have seen that people had some success using megatec driver. But now megatec is replaced by blazer-usb and I am not able to use my upses under nut. Can you help me? Thanks! Mario

On Dec 4, 2014, at 7:01 AM, janc at telefonica.net wrote: > I have got this output with driver usbhid-ups > > ups.conf > > [Phoenixtec] > driver = usbhid-ups > vendorid = 06da > productid = 0002 > port = auto > #~ langid_fix=0x0409 Oh, sorry - I meant for you to try that with blazer_usb. -- Charles Lepple clepple at gmail

2015-06-08 13:09 GMT+02:00 Bastien Nocera <hadess at hadess.net>: > On Mon, 2015-06-08 at 10:13 +0200, Arnaud Quette wrote: > > -ATTRS{idVendor}=="06da", ENV{UPOWER_VENDOR}="Liebert" > > > > +ATTRS{idVendor}=="06da", ENV{UPOWER_VENDOR}="Phoenixtec Power Co., Ltd" > > I'm guessing this would require changes in NUT, so I

Hi, I'm trying to get a Powerware 5115 to communicate with the NUT via USB under Debian Linux and need help. Here is the output that I see. co-nh5:/tmp/mnt/projects/pwusb/nut-2.4.1# /usr/local/ups/bin/upsdrvctl -u root start Network UPS Tools - UPS driver controller 2.4.1 Network UPS Tools - BCMXCP UPS driver 0.21 (2.4.1) USB communication subdriver 0.17 Communications with UPS lost:

I'm totally new to this, so heres hoping i can give you the info you need ... I have a new Trust usb UPS hooked up to my iMac (running Lion) The UPS shows up in the system report with the following info: Product ID: 0x0003 Vendor ID: 0x06da (Phoenixtec Power Co., Ltd.) Version: 5.01 Speed: Up to 1.5 Mb/sec Manufacturer: CTN Location ID: 0xfa144400 / 10 Current Available (mA):

I'm totally new to this, so heres hoping i can give you the info you need ... I have a new Trust usb UPS hooked up to my iMac (running Lion) The UPS shows up in the system report with the following info: Product ID: 0x0003 Vendor ID: 0x06da (Phoenixtec Power Co., Ltd.) Version: 5.01 Speed: Up to 1.5 Mb/sec Manufacturer: CTN Location ID: 0xfa144400 / 10 Current Available (mA):

Salut Bastien 2015-06-04 13:04 GMT+02:00 Bastien Nocera <hadess at hadess.net>: > On Sat, 2015-05-30 at 18:51 +0200, Arnaud Quette wrote: > > > > > > 2015-05-29 14:09 GMT+02:00 Bastien Nocera <hadess at hadess.net>: > > > On Fri, 2015-05-29 at 13:59 +0200, Arnaud Quette wrote: > > > > Hi Richard and the list, > > > > > >

On Dec 3, 2014, at 2:02 PM, janc at telefonica.net wrote: > USB error: error sending control message: Invalid or incomplete > multibyte or wide character This is a wild guess, but what about using the option "langid_fix=0x0409"? -- Charles Lepple clepple at gmail

On Dec 1, 2014, at 3:00 AM, janc at telefonica.net wrote: > I have a very nice working ups from: > CENER ref: "Active 1000VA 230V 12 CENER" and front logo "LA 900" Do you know what software was originally recommended for the UPS? Unfortunately, Phoenixtec seems to have made a lot of different USB-to-serial adapters. The most likely driver is blazer_usb (or nutdrv_qx,

Roman, I don't think I already asked, but could you post the output of lsusb -v -d 06da:0003 Just to be sure that we're not exceeding some buffer limitations of the device. Best regards, Arjen -- Please keep list traffic on the list

On Dec 11, 2014, at 5:43 AM, janc at telefonica.net wrote: > 0.339329 Entering libusb_get_report > 0.342986 Report[get]: (2 bytes) => 01 00 > 0.343085 Path: 008c0001.008c0003, Type: Feature, ReportID: 0x01, Offset: 0, Size: 8, Value: 0 > 0.343120 Entering libusb_get_report > 0.346953 Report[get]: (2 bytes) => 02 00 > 0.346993 Path: 008c0001.008c0002,

Hi! Charles. This is the output with 'explore' # ./usbhid-ups -DDDD -u root -x explore -x vendorid=06da -a CENER_LA900_usb Network UPS Tools - Generic HID driver 0.37 (2.6.4) USB communication driver 0.32 0.000000 debug level is '4' 0.000676 upsdrv_initups... 0.288980 Checking device (06DA/0002) (008/004) 0.316956 - VendorID: 06da 0.317057 - ProductID: 0002

UPS: PowerWalker VFI 3000RT LCD CentOS 6.5, nut installed from RPM package: nut-2.6.5-2.el6.x86_64 nut-client-2.6.5-2.el6.x86_64 Driver: blazer_usb Problem description: USB device "loops" when starting blazer_usb. USB device permissions are ok. Receives some information. Error messages: "failed to claim USB device: could not claim interface 0: Device or resource busy"

On Dec 4, 2014, at 7:01 AM, janc at telefonica.net wrote: > 0.339848 Report[get]: (2 bytes) => 01 00 > 0.339928 Path: 008c0001.008c0003, Type: Feature, ReportID: 0x01, Offset: 0, Size: 8, Value: 0 > 0.343852 Report[get]: (2 bytes) => 02 00 > 0.343931 Path: 008c0001.008c0002, Type: Input, ReportID: 0x02, Offset: 0, Size: 1, Value: 0 > 0.343975 Report[buf]: (2 bytes) => 02

Following the instructions a following site I can not get nut to work with my UPS. http://bernaerts.dyndns.org/linux/75-debian/335-debian-wheezy-install-monitor-eaton-ups Hope that you can find out what is wrong by the provided info in the email Best Regards, Magnus Karlsson # lsusb -s 001:005 -v Bus 001 Device 005: ID 06da:0002 Phoenixtec Power Co., Ltd UPS Device Descriptor: bLength

I have an UPS, that claims to be IPPon Back Power Pro 700. I'm trying to connect it using USB. lsusb -v says: Bus 1 Device 3: ID 06da:0003 Phoenixtec Power Co., Ltd Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0

Has anyone gotten the newhidups driver to work w/ the Powerware 9120 series? Here's what I get for debug info (It's the Phoenixtec device): $ sudo lsusb Bus 002 Device 002: ID 0846:1040 NetGear, Inc. Bus 002 Device 001: ID 0000:0000 Bus 001 Device 002: ID 06da:0002 Phoenixtec Power Co., Ltd Bus 001 Device 001: ID 0000:0000 $sudo /lib/nut/newhidups -DDDDD auto Network UPS Tools: New