similar to: [HCL] Aviem Power RT 1000-3000VA supported by blazer_ser

Hello list, we've got a PowerWalker VI 1000E/RT LCD UPS and like to use it with NUT using the blazer_ser driver. For the blazer_ser driver to display percentage, one has to add battery.voltage.high and battery.voltage.low voltages to the ups config. Here's what I received from the powerwalker customer service: Battery-Low Voltage: 21.6VDC Battery Shutdown: 19.2VDC Now my questions: 1.

Hi Artronic art 1000 bl is supported partially by blazer_ser: battery.voltage: 13.40battery.voltage.nominal: 12.0 beeper.status: enabled device.type: ups driver.name: blazer_ser driver.parameter.pollinterval: 2 driver.parameter.port: /dev/ttyS0 driver.version: 2.6.3 driver.version.internal: 1.51 input.current.nominal: 4.0 input.frequency: 50.1 input.frequency.nominal: 50 input.voltage: 232.9

Hi, I'm trying to get an Effekta UPS (works directly with blazer_ser) working behind a seriell to ethernet converter (Brainboxes ES-246). I've set the converter to 2400 baud, 8N1, no flow control. On the linux side I started socat and blazer_ser. All I got are timeouts after 12 seconds. I can see network traffic with tcpdump but I've no idea what to do to get this working. Does

On Feb 10, 2015, at 5:24 PM, Miroslav Todorov <miro0218 at yahoo.com> wrote: > Hi Artronic art 1000 bl is supported partially by blazer_ser: > When you say "partially supported", what is not supported? Are any of the values incorrect? -- Charles Lepple clepple at gmail

Hi, today I have tested the Zinto 800 with blazer_ser and blazer_usb on Citrix Server 7.0. Both works fine. upsc-Output (blazer_ser): battery.charge: 94 battery.voltage: 25.70 battery.voltage.high: 26.00 battery.voltage.low: 20.80 battery.voltage.nominal: 24.0 device.mfr: device.model: ZINTO 800 device.type: ups driver.name: blazer_ser driver.parameter.pollinterval: 2 driver.parameter.port:

On Jun 2, 2014, at 12:25 PM, Andreas Lausch / TBT wrote: > > Hi, > > thanks for the reply. > > On 2014-05-29 05:21, Charles Lepple wrote: >>> Now my questions: >>> 1. should the blazer_ser's high voltage be the voltage during charging >>> or right after I've unplugged it from the mains? >> sounds like during charging (or more

Hello First things first, thanks for great work with NUT. For years I used Informer compact 3kVA UPS http://www.informups.com/informer_compact.html with nut/megatec serial driver, but it stopped working when I switched to blazer_ser with 2.6.0 upgrade. I'm using 2.6.0 on gentoo. Blazer_ser seems to connect with UPS, but upsmon reports driver not connected. uname -a Linux localhost

On 2014-06-03 00:58, Charles Lepple wrote: >> I'm pretty sure I wouldn't rely on a charge percentage derived this way ;-) It's nice to see how much time one has left, event if it's not perfectly accurate. >> As mentioned in the other thread about the tripplite_usb driver, apart from having two sets of calibration constants, one for OL and one for OB, there is no

Hi, I tried using 2.6.1 version for windows with a Megatec-compatible UPS and was surprised to find out it doesn't work at all. The reason for that is blazer_ser using ser_get_buf specifying a buffer large enough to accept any reasonably possible response, setting buflen accordingly. That calls select_read() and it's supposed to wait until something is available and then to read up all

Hi, thanks for the reply. On 2014-05-29 05:21, Charles Lepple wrote: >> Now my questions: >> 1. should the blazer_ser's high voltage be the voltage during charging >> or right after I've unplugged it from the mains? > sounds like during charging (or more accurately, during float charging at the end of the cycle): > >

On Jun 2, 2014, at 6:48 PM, Charles Lepple wrote: > On Jun 2, 2014, at 12:25 PM, Andreas Lausch / TBT wrote: > >> >> Hi, >> >> thanks for the reply. >> >> On 2014-05-29 05:21, Charles Lepple wrote: >>>> Now my questions: >>>> 1. should the blazer_ser's high voltage be the voltage during charging >>>> or right

The REDi Blazer 600VA (BLAZER600c) UPS found here [ro_RO]: http://www.emag.ro/ups-redi-blazer-600va-blazer600c/pd/EX5X2BBBM/ which is actually a Centralion Blazer 600VA [en_TW]: http://www.centralion.com/html/product/back-Product-ups-blazer400.htm works with the blazer_ser driver ----------shell output---------- # upsrw ups # upscmd -l ups Instant commands supported on UPS [ups]: beeper.toggle -

Hi, I have a bunch of UPSs, most connected to pcs with Linux working 100% with NUT. The only one I have a problem with, is connected to Windows 7 64bit, and I used the straight MSI installed from the website named NUT-Installer-2.6.5-4.msi Took me a while to find a way to get it to work, but it is ugly for now. Just starting up the service results in a NUT not working at all, and I tracked it

I'm trying to execute some commands on my ups, but I keep getting ERR ACCESS-DENIED upscmd -l sinus Instant commands supported on UPS [sinus]: beeper.toggle - Toggle the UPS beeper load.off - Turn off the load immediately load.on - Turn on the load immediately shutdown.return - Turn off the load and return when power is back shutdown.stayoff - Turn off the load and remain off shutdown.stop -

We recently had to replace an old APC SmartUPS 3000 with a newer 3000VA (the 2U one). It has both serial and USB in the back (with an RJ-45 on the end of the serial cable). I can't get the apcsmart driver to connect. I figured it should work the exact same as the old UPS, with /dev/ttyS0 as the port (I'm using the same port on the server that the last one was plugged into). I even

Hello list, first of all, I'd like to report that my UPS N-Power MEV-3000LT (http://www.380v.ru/catalogue/micro-ups/mega-vision , in Russian), which is not in the hardware compatibility list, is mostly supported by the blazer_ser driver. I have very strong grounds to believe that this (and other) N-Power UPS'es are rebranded for Russian and Italian markets from their counterparts

Dear R'ers, when I e.g. install the integrate2.2-2 package under R1.1.1 (debian2.2) atlas is linked into the library: Installing package `integrate' ... libs gcc -shared -lc -shared -o /usr/lib/R/library/integrate/libs/integrate.so adapt.o adapt_callback.o bsrl.o flfm.o nxprt.o symrl.o wht.o -L/usr/local/lib -lf77blas -lcblas -latlas -lg2c -lm -L/usr/lib/gcc-lib/i386-linux/2.95.2

Hello, I have Mustek Powermust 2000VA USB And installed latest nut. Problem is that I cannot get info from UPS: http://pastebin.com/BtpE2Be1 I got contact with UPS via blazer_usb driver http://pastebin.com/38BZteFC Ups.conf: http://pastebin.com/KwRrz5rf Upsd.conf: http://pastebin.com/i3jNHpVj Upsd.users: http://pastebin.com/TRJ5ahWR Lsusb: http://pastebin.com/WsEbkPqG Dmesg:

Hi, I'm having trouble getting my Palm to sync with jpilot on my Centos system via USB. When I sync, I get this error in jpilot: pi_accept Illegal seek Exiting with status SYNC_ERROR_PI_ACCEPT Finished I have jpilot syncing fine with this Palm over the network, BTW. For USB, I set things up for udev as described on various websites. Here are the relevant ports & symlink (created

How do you go about configuring comm ports in Wine? I have a usb to serial adapter that is using ttyUSB1 under linux. The program I want to use under wine shows only the standard Windows comm ports; i.e, com1, com2, etc. How can I redirect those to ttyUSB1? dick