similar to: NUT v2.6.4 with HP AF401A won't start

Hi. Back before Christmas Arnaud sent me a patch for the snmp-ups driver for my HP R12000/3 UPS. Unfortunately shortly after I had to take quite a lot of sick leave so wasn't able to progress it, but I'm working on it again now. I'm at the point where I can start the driver with upsdrvctl and start the daemon with upsd. When I check the UPS status though it shows as OL DISCHRG OB,

On Jul 15, 2013, at 6:17 AM, Pratt Chris wrote: > Hi. > > Back before Christmas Arnaud sent me a patch for the snmp-ups driver for my HP R12000/3 UPS. Unfortunately shortly after I had to take quite a lot of sick leave so wasn?t able to progress it, but I?m working on it again now. Hi Chris, Is this the patch you are referring to?

Hi! Have a similar issue with one of our customers having HP R12000/3 UPS with AF430A card. Upsmon shows the UPS as Online, on Battery and Battery discharging at the same time: [root at smrsrvslv06 lib64]# upsc hpups at localhost ambient.temperature: 19.0 ambient.temperature.high: 0.00 ambient.temperature.low: 0.00 battery.charge: 94.00 battery.current: 0.00 battery.runtime: 4620.00

the built version of R (built using shared libraries) doesn't appear to find tcl/tk: Please help. Details: SGI configuration: 7.3.1.3m compilers from SGI uname -aR = IRIX64 mendel 6.5 6.5.16f 04101930 IP35 We built R on an SGI system using the following configure script: # explicitly choose vendor compilers for R rather than GNU # optimise output to support highest level of performance

Sorry about that! Chris. Chris Pratt Development Infrastructure Manager T: +44 118 929 4176 | M: +44 7979 854 307 | F: +44 118 929 4001 -----Original Message----- From: Charles Lepple [mailto:clepple at gmail.com] Sent: 16 July 2013 00:32 To: Pratt Chris Subject: Re: [Nut-upsuser] HP R12000/3 UPS reports status as OL DISCHRG OB On Jul 15, 2013, at 9:35 AM, Pratt Chris wrote: > Debug output

Hi, I'm trying to get Samba on a Linux box to work. Authentication via user level worked fine, but what I really want is it to take user authentication from a win2k box, which is our "primary local server". The win2k box is not a pdc, (the real pdc is 2000km away, close to the polar circle), but according to the docs it doesn't have to be. So in smb.conf I put: security =

Further information on this issue, attn. Arnaud Quette: Here is the result of a test I made a few days ago. I've pulled the input plug on the UPS and watched the 3 critical OIDs through a MIB browser: - 1.3.6.1.4.1.232.165.3.4.5.0 goes from 3 (OL) to 5 (OB) (as expected => good) - 1.3.6.1.4.1.232.165.3.7.3.0 stays at 1 (OB) (=> seems meaningless) - 1.3.6.1.4.1.232.165.3.7.4.0

Here's the first update of ups.status: 0.102449 getting data: ups.status (.1.3.6.1.4.1.232.165.3.4.5.0) 0.102546 su_ups_get: ups.status .1.3.6.1.4.1.232.165.3.4.5.0 0.102646 nut_snmp_get(.1.3.6.1.4.1.232.165.3.4.5.0) 0.104539 SNMP UPS driver : entering su_status_set() 0.104641 su_find_infoval: found OL (value: 3) 0.104730 => value: 3 0.104823 getting data: ups.status

I used to use multiple syslinux floppy images to implement what I call CD-ROM-multiboot (EL Torito supports up to 64 bootable images, Award BIOS 8 images, if not wrey old). Now that floppies are getting too small, I find that I must find a workaround for hard coded isolinux directory name in isolinux. Not a big deal, but there might be also others who would like to have multiboot feature. --

Hi, I would like to contribute code to make the SNMP driver compatible with HP's AF401A UPS module. It is also compatible with HP's older SNMP modules. It's just a new mib specification plus the necessary changes to snmp-ups.c Several sources have told me that these UPSs use the cpqpower.mib, but comparing that mib at http://www.snmplink.org/cgi-bin/nd/m/Ent/H/Hewlett

UPS: HP R3000 XR with HP UPS Management Module What I Want: I just want the UPS to shut down the client called "tor" before the UPS power drains out, I'd prefer to use a direct serial cable instead of network, in case the network doesn't work. I'll manage the UPS trough the ethernet using the built-in HTTP webinterface in the HP UPS Management Module. I've created a

Hi Charles, thanks for the clarification on the libusb. that indeed does work to get the value in ./configure. I've tried installing a .deb sudo dpkg -i nut_2.7.4-5_all.deb (Reading database ... 103447 files and directories currently installed.) Preparing to replace nut 2.6.4-2.3+deb7u1 (using nut_2.7.4-5_all.deb) ... Unpacking replacement nut ... Setting up nut (2.7.4-5) ... which

UNITEK Alpha650ipF and Alpha650ipE Build NUT v2.6.4 from sources http://www.networkupstools.org/source/2.6/nut-2.6.4.tar.gz System: RedHat Linux RHEL4 Kernel: 2.6.9-42.0.10.EL (upsc) command output : battery.charge: 100 battery.voltage: 14.30 battery.voltage.high: 13.00 battery.voltage.low: 10.40 battery.voltage.nominal: 12.0 device.mfr: UNITEK device.model: Alph650ipF device.type: ups

On Feb 27, 2014, at 7:07 AM, jimklimov at cos.ru wrote: > This apparently implies that, unlike some docs say, the snmp-ups driver can send the shutdown signals (is not crippled by design)? ;) We're working on it: http://buildbot.networkupstools.org/~buildbot/cayman/docs/latest/docs/man/snmp-ups.html#_shutdown A quick check says that the implementation has been there since v2.6.4, and

This apparently implies that, unlike some docs say, the snmp-ups driver can send the shutdown signals (is not crippled by design)? ;) Also, are those oids apc-private or commonly used/standard among snmp upses? Thanks, //Jim Typos courtesy of my Samsung Mobile -------- ???????? ????????? -------- ??: Charles Lepple <clepple at gmail.com> ????: 2014.02.25 13:08 (GMT+01:00) ????:

Hey guys, hope you don't mind this forward email, because I have been reading the 'flashpluginwrapper problem.' subject. The bug is in the linux_base, but nobody seem to check on this in the freebsd-ports. Looks like Brandon D. Valentine might needs to create a PR to get the better attention and keep the track. Cheers, Mezz >Summary: > >This began as a problem report

I have attempted to create cpqpowermib.h for the snmp-ups driver. We use HP UPSs and version 2 of the firmware for their AF401A management cards use the CPQPOWER-MIB. I have attached my current attempt (which builds and almost works against nut 2.4.1). Once all is working I'll send in the finished article for consideration. This file is based on ietfmib.h. There are a couple of issues

On Aug 2, 2017, at 12:09 PM, Song Teck <songteck at gmail.com> wrote: > > sudo dpkg -i nut_2.7.4-5_all.deb > (Reading database ... 103447 files and directories currently installed.) > Preparing to replace nut 2.6.4-2.3+deb7u1 (using nut_2.7.4-5_all.deb) ... > Unpacking replacement nut ... > Setting up nut (2.7.4-5) ... > > which doesn't return an error but

Hi Charles, That package is supposed to install both server and client (according to the description at https://packages.debian.org/stretch/nut anyway). I'll try both server and client individually later and see if that helps. Cheers, ST On 3 Aug 2017 7:26 a.m., "Charles Lepple" <clepple at gmail.com> wrote: > On Aug 2, 2017, at 12:09 PM, Song Teck <songteck at

On 2014-02-27 14:21, Charles Lepple wrote: > On Feb 27, 2014, at 7:07 AM, jimklimov at cos.ru <mailto:jimklimov at cos.ru> > wrote: > >> This apparently implies that, unlike some docs say, the snmp-ups >> driver can send the shutdown signals (is not crippled by design)? ;) > > We're working on it: > >