similar to: APC Smart UPS C1000

> >> Maybe it's not a standard ethernet-to-UPS cable? > > That's Ben's point - either it is actual Ethernet (usually found on an add-on UPS SNMP monitoring card, where the jack typically has two status LEDs, one on either side of the notch for the modular plug tab) that needs to go to another Ethernet jack on a NIC or a switch, or it is a proprietary APC cable that

On 12/27/18 8:09 AM, Charles Lepple wrote: > [...] That's Ben's point - either it is actual Ethernet (usually found > on an add-on UPS SNMP monitoring card, where the jack typically has > two status LEDs, one on either side of the notch for the modular plug > tab) that needs to go to another Ethernet jack on a NIC or a switch, > or it is a proprietary APC cable that

Hi All, hoping someone might have some insights to what is going wrong with my NUT setup and my APC Back - UPS RS 1500 (specifically a BR1500GI) using the usbhid driver. https://download.schneider-electric.com/files?p_File_Name=AHUG-9JU4RH_R0_EN.pdf&p_Doc_Ref=SPD_AHUG-9JU4RH_EN&p_enDocType=User%20guide Main issue: NUT successfully shuts down my server when it goes on battery but when

On 12/26/18 8:55 AM, Charles Lepple wrote: > On Dec 25, 2018, at 4:07 AM, David Melik wrote: >> Lately I got (used) an APC Back UPS Pro 1000 and Back UPS NS 1080. I got an [8P8C]-to-USB cable from another UPS, but the Pro isn't detected (with usbhid-ups.) I haven't tried the NS yet but it seems to not be on the list though looks just like the Pro. >> > There are a few

I've drug it as far under the table as I can get it on a 30% heart. Yeah, I'm getting on, I'll be 85 in about 2 weeks. Heart surgury will be scheduled in the next few days to replace a worn out, leaky aortic valve. Piece if cake if my veins are big enough. So what driver do I use with a Smart-UPS_1500??? Never mind it was found and accessed by the bootup! upsc my usp reports:

On 12/28/18 12:24 AM, David Melik wrote: > > On 12/27/18 8:17 AM, Charles Lepple wrote: >>> >>>> Maybe it's not a standard ethernet-to-UPS cable? >>> >>> That's Ben's point - either it is actual Ethernet (usually found on an add-on UPS SNMP monitoring card, where the jack typically has two status LEDs, one on either side of the notch for the

On 12/27/18 8:09 AM, Charles Lepple wrote: > If you leave off the "-d 051d:" part, do you see anything in the > listing that looks like it could be the UPS? (The 051d vendor ID is > for the vast majority of APC UPS models, but we have seen a few other > IDs here and there - mostly from acquisitions.) > > For instance, this is what one of my development boxes shows

Hi Charles, Ok. I'm testing NUT now with only pfsense running as the master and no slaves. I'm noticing a very strange behavior that totally doesn't make sense to me. So here's what I did (in chronological order): 1. Set override.battery.charge.warning to 55 and override.battery.charge.low to 50. 2. I started with a full charge battery and unplugged the UPS from the mains.

Hi there, I am using an old (really old) APC Smart-UPS 600. It worked fine under apcupsd but when I tried NUT it did not work. The error I was getting was: sudo /lib/nut/apcsmart -DDD /dev/ttyS1 Network UPS Tools (version 2.0.4) - APC Smart protocol driver Driver version 1.99.8, command table version 2.0 debug level is '3' Attempting firmware lookup Firmware: [D4] Not found in

Hi, I'm running an old APC Smart UPS 900i. As there isn't any software from APC which supports this UPS anymore, I've installed NUT (Gentoo Ebuilds), but version 2.0.5 and version 2.2.2 loose connection to the UPS while version 2.4.1 and SVN version don't show any settings and there are no instant commands. The only information I can get are: driver.name: apcsmart

On Dec 26, 2018, at 8:59 PM, David Melik wrote: > > root at 0.darwinheim <mailto:root at 0.darwinheim>:~# lsusb -d 051d: > root at 0.darwinheim <mailto:root at 0.darwinheim>:~# If you leave off the "-d 051d:" part, do you see anything in the listing that looks like it could be the UPS? (The 051d vendor ID is for the vast majority of APC UPS models, but we have seen

On Sep 14, 2019, at 3:30 PM, Gene Heskett wrote: > > I've drug it as far under the table as I can get it on a 30% heart. > Yeah, I'm getting on, I'll be 85 in about 2 weeks. Heart surgury will be > scheduled in the next few days to replace a worn out, leaky aortic > valve. Piece if cake if my veins are big enough. > Hope the procedure goes well! > gene at

On 2014-01-14 10:12, dstrr wrote: > Hello. > Trouble to communicate with APC SmartUPS via serial port. > UPS connected to the com1 port on windows host. > Communication witch hyperterm works well. > There is a log: > > YSM > ^ASmart-UPS SC1000 > n5S0713T63247 > m03/29/07 > L240.0 > B27.10 > > apcupsd also can communicate with the UPS and works well. >

Dear list, I have an APC Smart-UPS 1500 hooked up via the USB port. Recently, when we had a power outage, the only entry in the logs was: Dec 3 14:43:43 afs1 upsmon[3035]: UPS apc at localhost on battery and then the machine seems to have run until the battery was empty. It only notices the "battery low" after I turn the system back on: Dec 3 16:01:39 afs1 usbhid-ups[21973]:

On Dec 7, 2013, at 2:38 PM, Christian wrote: > Dear list, > > I have an APC Smart-UPS 1500 hooked up via the USB port. Recently, when > we had a power outage, the only entry in the logs was: > > Dec 3 14:43:43 afs1 upsmon[3035]: UPS apc at localhost on battery > > and then the machine seems to have run until the battery was empty. It > only notices the "battery

Dear, Currently, I'm looking for a UPS that can support NUT. I found an APC Smart-UPS 5000VA 230V SRT, but I'm not 100% that is supported. *APC Smart-UPS 5000VA 230V SRT* http://www.apc.com/shop/nl/nl/products/APC-Smart-UPS-SRT-5000VA-230V/P-SRT5KXLI I searched in http://networkupstools.org/stable-hcl.html and I found that you support "*APC Smart*" I would just to confirm

Using nut v2.2.2, and the APC serial cable. I have a client who's APC SMART-UPS 1500 (circa 2000) is always reporting LB. The batteries were old so they were replaced two weeks ago with brand new batteries. UPS still reported low batteries... I ran a calibration and a test on the unit (using the nut upscmd utility) During those tests, the battery charge on the unit goes to zero and slowly

Hello. Trouble to communicate with APC SmartUPS via serial port. UPS connected to the com1 port on windows host. Communication witch hyperterm works well. There is a log: YSM ^ASmart-UPS SC1000 n5S0713T63247 m03/29/07 L240.0 B27.10 apcupsd also can communicate with the UPS and works well. running apcsmart -a ups gives the following: com1: device reports different attributes than what were set

Hi all, just installed the nut package from apt on Ubuntu. Here's what I got. Network UPS Tools - UPS driver controller 2.4.3 Network UPS Tools - Generic HID driver 0.34 (2.4.3) USB communication driver 0.31 This APC device (051d:0003) is not (or perhaps not yet) supported by usbhid-ups. Please make sure you have an up-to-date version of NUT. If this does not fix the problem, try running the

We got replacement battery "kits" for some of our APC UPS' (Smart-UPS, rackmount). I put them into one tray (it's for an RBC 43, which takes 8, and weighs a ton), and put it in, and let it charge. Idiot "change battery" led stays on. So I hit the test button, it discharges very rapidly (a good number of servers on this), and the led stays on. For some reason,