similar to: Error starting a virtual machine

Hi. I have successfully installed ovirt. Boot 2 nodex throught PXE boot, and added to pool. Whe i try to create NFS storage, they in state: pending setup. How to add NFS storage? taskomatic.log INFO Wed Sep 30 16:59:09 +0300 2009 (1991) starting task_refresh_pool INFO Wed Sep 30 16:59:09 +0300 2009 (1991) storage_find_suitable_host: host node3.ovirt.priv uuid 30303234-3144-3832-4638-3931FF

Hi all, I've got some problems to make work oVirt. I've installed a Fedora 10 VM the lightest possible (nothing checked, even based) and installed after some packages (wget, sudo, acpid,...) and updated the system. By the way, acpid should be a dependency of ovirt-installer because the installation fails if it's not available. I've then installed ovirt (ovirt-server-installer

This patch changes taskomatic so it only sets the VM to shutdown if the undefine succeeds. Otherwise it's possible a shutdown event could not succeed, or take a while as it often does, giving confusing messages to the user. Basically we're just letting dbomatic handle it now. Signed-off-by: Ian Main <imain at redhat.com> --- src/task-omatic/taskomatic.rb | 1 - 1 files

Since Ruby::Qmf moves, the .key() method does not work anymore. It forces to use a .get_attr('key') in order to get the good value. Signed-off-by: Loiseleur Michel <mloiseleur at linagora.com> --- src/task-omatic/taskomatic.rb | 15 +++++++-------- 1 files changed, 7 insertions(+), 8 deletions(-) diff --git a/src/task-omatic/taskomatic.rb b/src/task-omatic/taskomatic.rb index

It seems people were getting confused by the message that taskomatic was disconnected and not logging a reconnect message. This patch makes it log on reconnect as well. Signed-off-by: Ian Main <imain at redhat.com> --- src/task-omatic/taskomatic.rb | 7 ++++++- 1 files changed, 6 insertions(+), 1 deletions(-) diff --git a/src/task-omatic/taskomatic.rb b/src/task-omatic/taskomatic.rb

Hi, is there a good reason why taskomatic check the number of real cores in the find_capable_host ? It prevents to use the full capacity of multithreading Signed-off-by: Arthur Clement <aclement at linagora.com> --- src/task-omatic/taskomatic.rb | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/src/task-omatic/taskomatic.rb b/src/task-omatic/taskomatic.rb index

This patch just checks the broker to see if it's connected before attempting to implement tasks. Signed-off-by: Ian Main <imain at redhat.com> --- src/task-omatic/taskomatic.rb | 7 +++++++ 1 files changed, 7 insertions(+), 0 deletions(-) diff --git a/src/task-omatic/taskomatic.rb b/src/task-omatic/taskomatic.rb index 5393c29..71432d2 100755 --- a/src/task-omatic/taskomatic.rb +++

--- src/task-omatic/taskomatic.rb | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/src/task-omatic/taskomatic.rb b/src/task-omatic/taskomatic.rb index 7de725d..0314e6a 100755 --- a/src/task-omatic/taskomatic.rb +++ b/src/task-omatic/taskomatic.rb @@ -548,7 +548,7 @@ class TaskOmatic dest_uri = "qemu+tcp://" + dest_node.hostname + "/system"

Signed-off-by: Simon Courtois <scourtois at linagora.com> --- src/task-omatic/taskomatic.rb | 5 ++--- 1 files changed, 2 insertions(+), 3 deletions(-) diff --git a/src/task-omatic/taskomatic.rb b/src/task-omatic/taskomatic.rb index 471ec88..1dfd74f 100755 --- a/src/task-omatic/taskomatic.rb +++ b/src/task-omatic/taskomatic.rb @@ -355,11 +355,10 @@ class TaskOmatic end end

Live migration is an operation which can takes times, like 2 or 3 minutes for heavy vms. Fixing this timeout work around another bug of db-o-matic: the infinite loop where node A has a defined & stopped vm X and node B has a defined & running vm X. I encountered this bug because the live migration has hit the timeout limit. Signed-off-by: Loiseleur Michel <mloiseleur at

This patch teaches taskomatic to use the volume 'key' instead of the path from libvirt to key the volume off of in the database. This fixes the duplicate iscsi volume bug we were seeing. The issue was that libvirt changed the way they name storage volumes and included a local ID that changed each time it was attached. Note that the first run with this new patch will cause duplicate

Previously, a pxe-booted vm would always boot to HD at next startup. Signed-off-by: Nicolas Ochem <nicolas.ochem at alcatel-lucent.com> --- src/app/controllers/vm_controller.rb | 1 + src/app/models/vm.rb | 15 +++++++++++---- src/app/views/vm/_form.rhtml | 2 +- src/task-omatic/taskomatic.rb | 13 +++++++++++-- 4 files changed, 24 insertions(+), 7

Signed-off-by: Simon COURTOIS <scourtois at linagora.com> --- src/app/controllers/vm_controller.rb | 5 ++ src/app/models/vm_task.rb | 4 +- src/app/views/vm/start.rhtml | 77 ++++++++++++++++++++++++++++++++++ src/task-omatic/taskomatic.rb | 7 +++- 4 files changed, 91 insertions(+), 2 deletions(-) create mode 100644 src/app/views/vm/start.rhtml diff

From: Simon Courtois <scourtois at linagora.com> Signed-off-by: Simon Courtois <scourtois at linagora.com> --- src/app/controllers/vm_controller.rb | 19 ++++++++++++++++- src/app/views/vm/_form.rhtml | 25 ++++++++++++++++++++--- src/db/migrate/044_add_virtio_to_vm_and_nic.rb | 11 ++++++++++ src/public/stylesheets/components.css | 5

I just build the latest ovirt from git and have a problem with storage now. Creating the storage pool works but when i try to add a volume i get "Pending_setup" and then in tasks "wrong number of arguments (1 for 2)". taskomatic log shows : ERROR Sun May 31 10:30:37 +0200 2009 (28807) Task action processing failed: ArgumentError: wrong number of arguments (1 for 2) ERROR Sun

There was no release since virtio support was introduced, so a proper migration is not necessary. Signed-off-by: Nicolas Ochem <nicolas.ochem at gmail.com> --- src/app/controllers/vm_controller.rb | 6 ++- src/app/models/nic.rb | 2 + src/app/views/vm/_form.rhtml | 25 +++++++++------- src/db/migrate/046_add_model_to_nic.rb | 29 ++++++++++++++++++

This sets up ovirt-agent to start as a daemon along with dbomatic, taskomatic etc. While this is not ready for prime time I think it should be ok as you still require a valid, authenticated, connection to qpidd to access it. Signed-off-by: Ian Main <imain at redhat.com> --- installer/modules/ovirt/manifests/ovirt.pp | 6 +++ ovirt-server.spec.in | 5 ++

Hi, Does somebody know what is the purpose of this line in taskomatic.rb : set_vm_vnc_port(db_vm, result.description) unless result.status != 0 We removed it to avoid 2 errors in taskomatic.log when a vm is launched : ERROR Mon Aug 30 15:23:00 +0000 2010 (26416) Task action processing failed: ActiveRecord::RecordInvalid: Validation failed: Vnc port must be greater than or equal to 0 ERROR

--- src/task-omatic/task_storage.rb | 50 +++++++++++++++++++++++++++++++++++++++ src/task-omatic/utils.rb | 40 +++++++++++++++++++++++++++++++ 2 files changed, 90 insertions(+), 0 deletions(-) diff --git a/src/task-omatic/task_storage.rb b/src/task-omatic/task_storage.rb index 77363ac..97ae4fc 100644 --- a/src/task-omatic/task_storage.rb +++ b/src/task-omatic/task_storage.rb @@

The error is caused by the save! method updating an object that another thread (most likely in taskomatic) already updated. In the case of this race condition, we retry saving. However, a proper fix would involve fixing the locking. --- src/db-omatic/db_omatic.rb | 23 ++++++++++++++++++++--- 1 files changed, 20 insertions(+), 3 deletions(-) diff --git a/src/db-omatic/db_omatic.rb