similar to: SLI support for 8800 GTX?

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Good day! - From Nouveau feature matrix page: >SLI or even multicard setups are very rare among developers. >You should start hacking with us, if you have such a setup. I have two GTX 770 cards running in SLI[1] and would like to help bringing SLI capability into Nouveau. I would gladly write code for it and I am a competent C programmer

I have a Lenovo y510p laptop that has two 755's in sli. It seems at this time Nvidia does not have support for SLI on Linux. Do you support this with the 755m card? If so please provide me with a link for instructions. Otherwise if this is not supported officially through you guys, is there any goal to do so in the future? -- {?} Daniel "Thirsty Gnome" Thurston {?} --------------

Hello, our company has several pieces of old graphics cards QUADRO FX 4500 and FX 5600 able to run in SLI. Is somebody interested in SLI development? TonyMi -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.freedesktop.org/archives/nouveau/attachments/20141106/19caecf8/attachment.html>

While I wait for the Xen 3.0 Test CD to download, has anyone has luck using an Asus M2N32-SLI Deluxe motherboard (NVIDIA nForce 590 SLI MCP chipset)? The CPU is an AMD Athlon64 X2 3800+ AM2 w/ 2GB DDR2 533. The motherboard mostly works under Gentoo using kernel 2.6.18 with the "noapic" kernel boot option in my grub.conf file. The only major issue with the Gentoo kernel

http://bugs.freedesktop.org/show_bug.cgi?id=16897 Summary: Support for multiple nvidia cards Product: xorg Version: unspecified Platform: x86 (IA32) OS/Version: Linux (All) Status: NEW Severity: normal Priority: medium Component: Driver/nouveau AssignedTo: nouveau at lists.freedesktop.org

2016-01-03 20:11 GMT+01:00 Ilia Mirkin <imirkin at alum.mit.edu>: > On Sun, Jan 3, 2016 at 1:52 PM, Csányi Pál <csanyipal at gmail.com> wrote: >> So there is an AMD card too: >> VGA ASUS AMD Radeon R7 240, R7240-2GD3-L, 2GB DDR3, 128bit, >> 730/1800MHz, HDMI, DVI-D, D-sub >> >> What would be the best choice here: >> GEFORCE GT 730 >> or

I was having trouble finding information on this issue. It doesn't seem that too many Linux users use quad sli? My native apps (such as Unigine Heaven, tropics, etc) work great with quad sli turned on, but wine apps do not and I have to run them on one gpu to be playable. Ive tweaked the SLI mode to every possible combination and played with the driver settings too. is sli not yet supported by

Anyone doing Centos on SLI 4 monitor workstation? I am currently building a workstation out with Dell for this. I hope to use CentOS (x86_64) on it. Any advice or words of wisdom would be GREAT! This will be my first attempt at SLI. I have done 4 screens but AGP/PCI combos only. This one we need hardcore 3D ability on all of them. I would like to use CentOS 4.2, will atleast try it first

http://www.nvidia.com/object/sli_multi_os.html Nvidia SLI multi os for assign one Quadro graphic card to multiple domU is possible also in Xen or only in parallels for now? Thanks for any reply -- View this message in context: http://xen.1045712.n5.nabble.com/Nvidia-SLI-multi-os-and-Xen-tp5041988p5041988.html Sent from the Xen - Dev mailing list archive at Nabble.com.

I have constructed a Trellis style xyplot. lengthf <- factor(length) xyplot(SLI$velocity ~ SLI$width | SLI$lengthf, layout = c(2,7), xlab = "Width (cm)", ylab = "Velocity (m/s^2)", col = "black") This produces a lovely little plot. However, the grouping factor(lengthf) isn't in the right order. My values range from 2-28 and the 2 graph on the bottom left and

I've been having an extremely hard time using the on board SATA controller on my nvidia based board. I have two 160gig Maxtor SATA drives attached to the on board controller, setup as software raid0. The problem is the array is extremely unreliable, where I'm getting constant I/O errors like: sd 0:0:0:0: SCSI error: return code = 0x00040000 end_request: I/O error, dev sda, sector

Hi All, My graphics is slow on HVM guest so To make it fast I want to use GPU pass through but in xen source i did not find support for that (device ID for graphics card GTX 480/590) I have bellow configuration 1->Intel VT support board 2->xen 4.0 3->GTX 480/590 I have the following query 1->with open source xen 4.0, Can I use GPU pass-through for GTX 480/590 or I need to apply

Me again. The ASUS P5N32-SLI motherboard in my new machine has dual NICs but CentOS has only detected one of them. I've tried rebooting with the network plugged in only to the second one, but kudzu still doesn't find it. Any suggestions?

I am having problems with silent data corruption on (some) drives connected to an MCP55 SATA controller. I have two servers, both running RELENG_7_0/amd64. One has the 570 Ultra chipset, the other has 570 SLI. Both chipsets have the MCP55 SATA controller. The server with 570 Ultra chipset has a bunch of older 250GB SATA-150 drives hooked up to the MCP55 controller and it is working just fine.

What about the Asus M2N-SLI Deluxe motherboard? It has 7 SATA ports, supports ECC memory, socket AM2, generally looks very attractive for my home storage server. Except that it, and the nvidia nForce 570-SLI it''s built on, don''t seem to be on the HCL. I''m hoping that''s just "yet", not reported yet. Anybody run Solaris on it? Or at least on any

Hi. I am getting rid of my former nvidia graphic cards. Their models are not listed on http://nouveau.freedesktop.org/wiki/HardwareDonations/ but as advised, I post here. Hardware: - 7600GS 256MB (2 cards) Maker: Gigabyte, originally in SLI setup (wink, wink) Outputs: VGA, DVI-I, s-video, SLI - GTX280 1GB (1 card) Maker unsure, only nvidia markings visible, but possibly ASUS

Have the following problems: MBO USB-MultiCardREader 6-in-1 does not read 128MB CF-Card. Oct 3 13:49:23 katrin /kernel: da0 at umass-sim0 bus 0 target 0 lun 0 Oct 3 13:49:23 katrin /kernel: da0: <ICSI IC1100 CF 2.5B> Removable Direct Access SCSI-0 device Oct 3 13:49:23 katrin /kernel: da0: 650KB/s transfers Oct 3 13:49:23 katrin /kernel: da0: Attempt to query device size failed:

Hello, Nouveau devs! I would like you to know that I have a laptop with 2 Geforce GTX 285m cards on board in an SLI config, I know the SLI part is not relevant at this point, but I still would like to offer my rig for testing single card configs. If you want to walk me thru what you need me to do, just shoot me an email. Matthew Kolar

I posted a thread here... http://forums.opensolaris.com/thread.jspa?threadID=596 I am trying to finish building a system and I kind of need to pick working NIC and onboard SATA chipsets (video is not a big deal - I can get a silent PCIe card for that, I already know one which works great) I need 8 onboard SATA. I would prefer Intel CPU. At least one gigabit port. That''s about it. I

Hi all, Is there a "speed dial" type application in *? The NEC PBX we currently use has a feature which allows any phone to access a system-wide speed dail database simply by keying the speed-dial number and pressing the 'redial' key from any extension. Even using a vinella phone on an sli the user can dial 77+speedial# and access this directory. Does * have a similar