similar to: CentOS5 and ipw2200

Yohoo! I'm using rsnapshot-1.3.0-1.el5.rf (from DAG) and rsync-2.6.9-1.el5.rf (from CentOS5) together. Rsnapshot now starts every task with the "--relative" switch. Without this switch it will backup all subsequent folders (like /proc and so on) which isn't desired. So I can't omit the "--relative". But there was a bug for rsync prior to 2.6.9 that it won't

Yohoo! I have some issues with the smartd in CentOS5/x64 I edited the /etc/smartd.conf for my needs and restarted the smartd with "service smartd restart". But the start script is overriding my file. I checked it and saw the following lines: ---------------/etc/init.d/smartd------------ case "$1" in start | reload | restart) GEN_CONF="*SMARTD*AUTOGENERATED*" [ !

I am playing with a new machine I just got in and it is dying on boot... I'm wondering if it is to much machine for Centos to run.. It is a Generic machine using a Tyan Thunder motherboard running (8) eight dual core AMD 855 cpu's with 128 gig of ram, not 128 meg, but 128 gig of ram. (2) SCSI 146 Seagate Drives. ATI Graphics built onto the board. The error I'm seeing is on

Yohoo! Is there a repository for CentOS5 with VDR? On http://www.cadsoft.de/vdr/ I only find the sources, but no rpms. Thanks! Christian Volker Technical Support Engineer -- Parnell House, Barrack Square, Ballincollig, Co. Cork, Ireland

Hi, I have CentOS4.1 up to date and I get on boot: ipw2200: Detected Intel PRO/Wireless 2915ABG Network Connection divert: allocating divert_blk for eth1 ipw2200: ipw-2.2-boot.fw load failed: Reason -2 ipw2200: Unable to load firmware: 0xFFFFFFFE divert: freeing divert_blk for eth1 ipw2200: failed to register network device ipw2200: probe of 0000:03:03.0 failed with error -5 My understanding

In 5100 and 1100 series Inspirons Intel 2915abg cards work MUCH cooler than the original Broadcoms, don't choke up in hot weather like the original Dell cards and don't require ndiswrapper. (All of 2 Notebooks were tested outdoors at 98 deg F ambient. Dropouts occured in both Centos 4.4 & XP on these dual boot notebooks with the Dell Mini-PCI's, none with 2915's). The only

I've installed ipw2200-firmware-3.0-3.nodist.rf from RPMForge using yum OK. I've loaded the ipw modules with /sbin/modprobe ipw2200 and then /sbin/lsmod | grep ipw which gives: ipw2200 136873 0 ieee80211 33417 1 ipw2200 However, when I run system-config-network I don't see Intel Coporation PRO/Wireless 2200BG (eth1) in the list of adapters. Also, when I

Has anyone else had any problems with getting wifi to work after upgrade ? I am using ipw2200 on an HP laptop - was working under 4.3 Ian -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20060906/3a518796/attachment-0002.html>

I am going to be setting up an Intel 2200bg card this evening. I was wondering if anyone is using this (successfully) with CentOS 4. The directions look straightforward, but please let me know if you had to do anything interesting/undocumented to make it work. I am also wondering if people are using the driver provided with the current CentOS 4 kernel or if people are using the most recent

Hi All, can anybody tell me what has changed in this new kernel release that is getting most of us stucked ? I have an Intel HDA Audio device and an Intel 2200 wireless in my laptop and both stopped working with this new kernel. Both audio and wireless device seems to be ok but there's no sound from the intel hda and the wireless find AP's but doesn't connect. below is the lspci

Hi ALL, Short description of my problem: I am not able to make wireless network working on the IBM ThinkPad T43p. System: T43p OS: CentOS 4.4 kernel: 2.6.9-34.EL firmware: ipw2200-firmware-3.0-3.nodist.rf.noarch.rpm What did I do ? - installed firmware from RPM package - removed kernel driver (/sbin/rmmod ipw2200) - installed kernel module (/sbin/modprobe ipw2200) dmesg output:

Hi, I am trying to install xen-3.2.0 , but its failing. The rpms used for installing are 1. xen-3.2.0-0xs.fc8.i386.rpm 2. xen-3.2.0-0xs.fc8.src.rpm 3. xen-debuginfo-3.2.0-0xs.fc8.i386.rpm 4. xen-devel-3.2.0-0xs.fc8.i386.rpm 5. xen-libs-3.2.0-0xs.fc8.i386 when I tried installilng the first rpm rpm -ivh /home/devi/Desktop/xen-3.2.0-0xs.fc8.i386.rpm it gave an failed dependencies

I have an Everex laptop (ick, but it was super cheap) that has an Atheros wireless NIC in it, but I can't seem to get it to connect to my wireless in-home LAN. Here's what I've done so far (that isn't working) - any suggestions? [root at marktop mark]# lspci | grep Ether 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 7c) 05:01.0 Ethernet controller:

this seems to be the right firmware https://wireless.wiki.kernel.org/_media/en/users/drivers/iwlwifi-2030-ucode-18.168.6.1.tgz <https://wireless.wiki.kernel.org/_media/en/users/drivers/iwlwifi-2030-ucode-18.168.6.1.tgz> > Am 14.04.2016 um 05:01 schrieb John R Pierce <pierce at hogranch.com>: > > On 4/13/2016 7:42 PM, Philip V wrote: >> lspci gives >> 08:00.0

Hello, I would like to install the latest tinc software on a fedora 8 Linux box. I tried the rpm for FC3 from http://dag.wieers.com/rpm/packages/tinc/, and I got dependency errors complaining that libcrypto.so.4 is needed. I've got openssl rpm package installed which uses a different versino of libcrypto, and creating symbolic links won't solve the issue. Then I found this article

Hi all, I compiled and installed Xen 3.2 source on FC8. Compilation and installation completed with no errors. However when I try to load Xen I get an error: Kernel panic - Attempted to kill init !!! This is my grub configuration: # grub.conf generated by anaconda # # Note that you do not have to rerun grub after making changes to this file # NOTICE: You have a /boot partition. This means

With CentOS 7.2 a laptop wireless card is recognized in dmesg, but nonfunctional. Toggling the hardware wifi switch causes the Bluetooth icon to appear and disappear. The network configuration window shows the Wireless tab greyed out. Rebooting with the bluetooth enabled does not help. It appears the appropriate driver is iwlwifi, which is what works in Fedora and appears to be available and

Hi: Any hints/pointers welcome. I am very new to Xen, I have a AMD "AMD Athlon(tm) 64 X2 Dual Core Processor 4000+" based system on which I am running X86_64 Fedora Core 8. I have installed Xen-3.1 on it, but I can''t get Xen to boot. It seems unable to find the root volume, the kernel panics and reboots immediately so I can''t capture or write down anything and I

I found a src.rpm for 1.1.5-1 for fc8 (not rh8!). I was able to rebuild it on my Centos build system. The rpms are identified as 1.1.5-1.i386.rpm, no el5 or other identification was placed in the files. I don't see how to control this when you rebuild from an existing src.rpm. Interestingly the fc8 designation was lost. I also rebuild it on my fc10 system. It worked, and the rpms have

I'm having a wireless connection issue with an HP laptop and a Zotac media server after the 6.4 package updates from CR repository. Nothing changed with wireless config as far as I can tell. Both have been working fine with previous releases of 6.x. Oddly, if a cat 5 cable is connected for a few seconds and then disconnected the wireless works fine and survives a 'service network