similar to: [HCL] PowerShield Defender 1200VA supported by blazer_usb (mustek subdriver)

Hi, Sometime ago I asked the question about getting nut to run on my iMac as I was having trouble getting the USB driver to behave with OS X. The same driver under LINUX is fine. It was suggested that the better option might be to run nut on a Rasberry PI instead and monitor the nut daemon from the iMac. Well I have bought a Rasberry PI, I have other things planned for it. I have installed nut

G'day, New toy, came with bundled software which is non-free, so I'm looking at whether NUT can be convinced to play with the toy. I've never used NUT before. OS name and version: Ubuntu 10.10 exact NUT version: 2.4.3-1ubuntu5 NUT installation method: Ubuntu package nut exact device name and related information: PowerShield Centurion 2000

Hi All, I am trying to install and configure NUT [ 2.7.4 ] to shutdown my iMac [ 10.13.5 ] via my Powershield Defender 1200 UPS when the UPS reaches a specified lower battery condition. The Defender 1200 attaches to the iMac via USB. The Defender appears on the the HCL - The required driver is 'blazer_usb' The UPS is visible on the USB bus as: USB to Serial: Product

On Jan 2, 2012, at 10:51 AM, Vladimir Micovic wrote: >> Bus 003 Device 004: ID 0665:5161 Cypress Semiconductor USB to Serial > Unfortunately, this device ID is used by several different vendors. What does "lsusb -vvv -d 0665:5161" show? > Also, what OS and kernel are you using? (I thought certain kernels had USB-to-serial drivers for that chip.) > -- > Charles

On Jun 6, 2018, at 5:18 AM, Walter HILL <hill at ieee.org> wrote: > > Does anyone know of a relatively recent guide to getting this UPS > running on a newer version of OS X? I am aware that Apple have been > re-engineering their startup process so I expect that getting the driver > to work may be the least of my problems. > To be honest, I have not seen much demand for

Hi, I'm not the maintainter for the "megatec_usb" driver (in fact, I'm no longer maintainer for the base "megatec" either), so I don't really know the status for that particular UPS. I'm forwarding this to the NUT mailing-list though. Regards, -- Carlos Rodrigues On Fri, Dec 5, 2008 at 10:30 AM, Adrian Czerniak <adrian.czerniak at becomo.com> wrote:

Hi, I'm not the maintainter for the "megatec_usb" driver (in fact, I'm no longer maintainer for the base "megatec" either), so I don't really know the status for that particular UPS. I'm forwarding this to the NUT mailing-list though. Regards, -- Carlos Rodrigues On Fri, Dec 5, 2008 at 10:30 AM, Adrian Czerniak <adrian.czerniak at becomo.com> wrote:

Hello i need your help regarding the following issue : i have a hero touch ups from infosec. it is connected via USB to a raspberry pi 3. i?ve configure ups.conf file as below [HERO] driver = blazer_usb vendorid = 0665 productid = 5161 either with port = auto or port = /dev/hidraw0 or port = /dev/ttySo the connection never works i get the

Lyonn CTB-1200 root at frambuesa:~# upsc lyonn at localhost battery.voltage: 27.20 battery.voltage.nominal: 24.0 beeper.status: enabled device.type: ups driver.name: blazer_usb driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.version: 2.4.3 driver.version.internal: 0.03 input.current.nominal: 5.0 input.frequency: 49.9 input.frequency.nominal: 50 input.voltage: 213.3

Hi, another UPS piece supported by blazer_usb: ALLSAI model LV 2K upsc output: battery.voltage: 82.08 battery.voltage.nominal: 72.0 beeper.status: enabled device.mfr: device.model: LV 2K device.type: ups driver.name: blazer_usb driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.version: 2.4.3 driver.version.internal: 0.03 input.current.nominal: 18.0 input.frequency: 59.9

I got my USB ups reporting on macOS, but it was quite a while ago, I’ll have to dig into how I did it.. I do remember is wasn’t simple.. ( actually is was long drawn out pain in the …. ) Maybe search for posts from me, I’ll check what I did on the weekend and get back to you.. Or, buy an APC.. as they will just appear in Energy Saver.. > On 6 Jun 2018, at 15:41, Charles Lepple

Hi all, I have an eaton ENV800HA connected for a freebsd 9.0 box with nut 2.6.5 installed (on the supported list). The UPS is connected using the Blazer_USB driver (not sure how to check its version). When I kick off upsd it detects the UPS no problems and I get all my information: battery.charge: 100 battery.voltage: 13.60 battery.voltage.high: 13.00 battery.voltage.low: 10.40

Gabor: note, these HCL reports go to the nut-upsdev list. Begin forwarded message: > From: Gabor Tjong A Hung > Subject: Re: Network UPS Tools - Compatibility List > Date: September 3, 2013 2:18:31 PM EDT > > Sorry, > I just noticed the "If your device isn?t listed" part: > > [HCL] Forza FX-1500LCD supported by blazer_usb > > > [root at freenas] ~#

System: Cenots Linux 6.9 Application: nut-2.7.5-0.20170613gitb1314c6 [with usb 0.1 from distro] Device: Mustek PowerMust 1060 LCD Comunication log file: dump.txt We are looking at the possibility of successful communicating with this device UPS Mustek PowerMust 1060 LCD. PS: wolfy on the list gives me assistance and i can install any new compiled nut version from sources. Thanks, Catalin.

Hello, i try to setup NUT service to read/control my UPS but without success. Problem is when i try to start "/usr/local/ups/bin/upsdrvctl -DDDD -u root start" i got: /Network UPS Tools - UPS driver controller 2.6.2/ / 0.000000/ /If you're not a NUT core developer, chances are that you're told to enable debugging/ /to see why a driver

A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 188 bytes Desc: not available Url : http://lists.alioth.debian.org/pipermail/nut-upsdev/attachments/20071124/3ceb35d2/attachment.pgp

Hi, Sometime ago [ June 2018 ] I posted a message about getting trying to get NUT to work with a Power Shield Defender 1200VA UPS. This model appears in the HCL at https://networkupstools.org/stable-hcl.html That UPS reported the following when queried using 'lsusb' on an iMac running macOS [ 10.15 ] Bus 001 Device 008: ID 0665:5161 Cypress Semiconductor USB to Serial Device Descriptor:

Device manufacturer: JAWAN tech Name: JW-UPSLC02 Protocol: Q1 / Megatec protocol Product Description from ?nut-scanner? : ? WayTech USB-RS232 Interface (V1.0) Baud rate 2400bps? vendorid = "0665" productid = "5161" [upsc output] battery.charge: 100 battery.voltage: 13.60 battery.voltage.high: 13 battery.voltage.low: 10.4 battery.voltage.nominal: 12.0

Hello, It looks like the nut-upsuser list is momentarily down. That's why I send it to nut-upsdev list too. I have recently bought a mustek Powermust 1000VA USB (sadly not the USB P version). I have done some tests with the latest nut 2.2.0 megatec and megatec_usb drivers. Here are my feedbacks. It works quite well but is extremely noisy in battery mode (and that is not the noise of the

Hello, It looks like the nut-upsuser list is momentarily down. That's why I send it to nut-upsdev list too. I have recently bought a mustek Powermust 1000VA USB (sadly not the USB P version). I have done some tests with the latest nut 2.2.0 megatec and megatec_usb drivers. Here are my feedbacks. It works quite well but is extremely noisy in battery mode (and that is not the noise of the