similar to: 6.1 Prerelease, USB-to-IDE problem

I have a new system which includes a Plextor PX-740a DVD+-R/RW CD-R/RW drive attached to an Asus A8V-MX motherboard. When I try to use burncd to burn a cd, it writes all of the data, says "fixating CD, please wait.." and then reports burncd: ioctl(CDRIOCFIXATE): Input/output error Oddly enough, the CD seems to be usable. I can successfully burn the same file if I use cdrecord. The

I have an Asus A8V-MX motherboard with an AMD Athlong 64 X2 3800+ CPU and I'm trying to run powerd to keep it cooler/quieter/greener. I'm running -STABLE (6.1-RC) cvsup'ed a couple of days ago, with a kernel config that consists of the SMP sample plus an atapicam device. I'm loading the cpufreq.ko module in /boot/loader.conf. I've attached my dmesg output and sysctl -a

My new PC has an internal 16-in-1 card reader connected via USB 2.0. The device is the Techsolo TCR-1640 (http://www.techsolo.de/product/cardreader/tcr_1640/index.php). I boot from a compact flash inserted in it and I can mount and unmount the same CF once the system has booted and has mounted the root partition from my graid3 array. The problem arise when I replace the inserted CF with another

Hi Folks, I've facing an intermittent hang with a USB port which seems cam related: Event's that happen are: o USB modem (HUAWEI E220) plugged into PC ugen3.2: <HUA WEI> at usbus3 u3g0: <3G Modem> on usbus3 u3g0: Found 3 ports. umass0: <USB MASS STORAGE> on usbus3 umass0: SCSI over Bulk-Only; quirks = 0x0000 umass0:6:0:-1: Attached to scbus6 umass1: <USB

Three different external hard drives (Seagate, Western Digital and noname USB 3.0 enclosure) refused to be recognized as the umass devices. Reverting /usr/src/sys/dev/bsd/controller to r248085, building and loading just xhci module makes drives appear again. Below are snippets from the log in both cases: Non working: Jul 4 14:35:17 twinhead kernel: xhci0: <XHCI (generic) USB 3.0

Hi, I have some problems with usb da and uscanner giving me I/O-errors. This is on a ASRock K7VT2 board. If there is anything else I could do (testing patches, providing further info), please let me know. 4.8-STABLE from 04.08.2003: - MBO USB-MultiCardReader 6-in-1 mount_msdos => Input/output error - Epson Perfection 1260 Scanner scanimage --test => Error during device I/O

Have the following problems: MBO USB-MultiCardREader 6-in-1 does not read 128MB CF-Card. Oct 3 13:49:23 katrin /kernel: da0 at umass-sim0 bus 0 target 0 lun 0 Oct 3 13:49:23 katrin /kernel: da0: <ICSI IC1100 CF 2.5B> Removable Direct Access SCSI-0 device Oct 3 13:49:23 katrin /kernel: da0: 650KB/s transfers Oct 3 13:49:23 katrin /kernel: da0: Attempt to query device size failed:

I purchased the 256 MB A-DATA flash drive (USB 2.0 SpeedDrive), but the system can't query its size. Here is corresponding parts of system messages (boot -v): >>>>>>>>>>> Aug 5 12:53:57 goshik /kernel: Copyright (c) 1992-2003 The FreeBSD Project. Aug 5 12:53:57 goshik /kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 Aug 5

Hi! Just before we start, this is not the "USB hang on boot" problem. OK? This post got rather long, so I'll summaries it all in a sentence here: With FreeBSD 4.9-rc on an ASUS A7N8X with a cheapo memory stick, simply plugging it in and taking it out a couple of times is a guaranteed panic. I use only one USB device, a cheapo USB memory stick, which I recently bought on a

Morning All, I upgraded from 9.2-STABLE to 10.0-PRERELEASE #0 r259144 last night and I am now getting this every 2 seconds in /var/log/messages: Dec 10 07:54:31 Shop kernel: ata1: FAILURE - zero length DMA transfer attempted Dec 10 07:54:31 Shop kernel: ata1: setting up DMA failed cat /var/log/messages | grep ata1: cd0 at ata1 bus 0 scbus3 target 0 lun 0 cd0: <TSSTcorp DVD-ROM TS-H352C

When ever I try try to mount any burned CD/DVD media I get the error below. mount_cd9660 -v /dev/cd0 /mnt using starting sector 0 mount_cd9660: /dev/cd0: Input/output error Exit 1 Which in dmesg results in... g_vfs_done():cd0[READ(offset=-2207623839744, length=2048)]error = 5 This is odd because if I unplug the USB CD drive and plug it into my netbook running a old RELENG 7.0-STABLE it works.

If you have any of the devices listed below, please test with a recent -stable or -current. They will stop working in 4.9 and 5.2 although old behavior can _temporarily_ be enabled by adding "options DA_OLD_QUIRKS" to your kernel config. If I don't hear from anyone, they'll be going away permanently after the releases. -Nate #ifdef DA_OLD_QUIRKS /* Below a list of

Hi. On one of my fresh installed servers I am seeing the following output during boot: gptzfsboot: error 4 lba 30 gptzfsboot: error 4 lba 31 gptzfsboot: error 4 lba 31 gptzfsboot: error 4 lba 31 gptzfsboot: error 4 lba 30 gptzfsboot: error 4 lba 31 gptzfsboot: error 4 lba 31 gptzfsboot: error 4 lba 31 gptzfsboot: error 4 lba 31 gptzfsboot: error 4 lba 31 gptzfsboot: error 4 lba 31 gptzfsboot:

I have a motherboard here that reports USB controllers thusly in dmesg (5.4-stable): usb0: OHCI version 1.0, legacy support usb0: <SiS 5571 USB controller> on ohci0 usb0: USB revision 1.0 uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ohci1: <SiS 5571 USB controller> mem 0xf7002000-0xf7002fff irq 5 at device 3.1 on pci0 usb1:

From: tarkhil@over.ru [mailto:tarkhil@over.ru] > On Wed, Aug 20, 2003 at 01:12:51PM +0400, tarkhil@over.ru wrote: > > 10-20 minutes of work. New processes doesn't create anymore, process trying > > to fork looks in top having -20 PRI and "temp" STATE. I was unable to find > > I've got infected computers in my network. When ipnat mapping > table grew to

I have a current RELENG_7 running on: http://www.supermicro.com/products/system/4U/7045/SYS-7045B-TR+.cfm with the -3+ IPMI card. I can interact with the BIOS, etc, but no joy once we get past the loader. Anyone have ideas? Attached is the kernel config, and the /var/run/dmesg.boot file. -- Larry Rosenman http://www.lerctr.org/~ler Phone: +1 512-248-2683

Hi, Can someone please help me with this? I have just upgraded from 4.7 to 4.8-STABLE and this is what I am getting when I try a tape backup. Please CC as I am not in the list. It was working well before the upgrade (dump -0ua -f - / | gzip -c -9 | dd of=/dev/nsa0). Thank you, Lefteris Tsintjelis Jul 3 22:55:18 ene /kernel:

Hello, I've an SCSI version of the IOMEGA REV drive (35 GB, like ZIP drive). How can I access this drive. FreeBSD detects the drive as CDROM: cd0 at ahc0 bus 0 target 4 lun 0 cd0: <Iomega RRD 89.B> Removable CD-ROM SCSI-4 device cd0: 20.000MB/s transfers (10.000MHz, offset 8, 16bit) cd0: cd present [17090880 x 2048 byte records] I'm using FreeBSD 6.1-RC. Kind regards, Thomas.

On Tue, Apr 15, 2008 at 12:20 PM, Roland Smith <rsmith@xs4all.nl> wrote: > On Tue, Apr 15, 2008 at 11:34:31AM -0700, Steve Franks wrote: > > Being a naturally curious guy, with your pointers, I've located the following: > > > > [steve@dystant /var/crash]$ sudo cat info.2 > > Yep. This is what you need. > > > > Dump header from device

Hello, while reading/writing dvd on 6-STABLE (can't remember on 7-STABLE right now), I'm getting the message buffer filled by errors. This is my dvd-rw $ sysctl dev.acd.0.%desc dev.acd.0.%desc: PIONEER DVD-RW DVR-109/1.58 attached to $ sysctl dev.atapci.1.%desc dev.atapci.1.%desc: VIA 8237A UDMA133 controller And the followings are some examples of the error: