similar to: garbled top display

I'm having problems with the voicemail prompts. The beginning of each prompt is garbled. Prompts "edian mail" and "assword" can be recognized, but when it starts on the short phrases it is completely garbled. It is almost like the subsequent phrase starts before the current phrase finishes. I have isolated the LAN to the * box and the phones, so LAN congestion is

Hello, I just bought a Snom-320 from ATAComm. I plugged it into my LAN, registered it with *, etc. All my other SIP gear is Sipura and works fine, both on the LAN and over the Internet. The new Snom seems like it can't process the audio from the handset mic. A steady tone is garbled, even on the LAN. I've contacted ATAComm, Snom and the company representing Snom in the US. So

We have a system that is designed with no VGA port, graphics card, or keyboard, only a serial console. We're trying to boot a Linux via ISOLINUX. The problem is that when ISOLINUX comes up, the screen is usually garbled. Not always; sometimes it's intact, sometimes it's completely blank. When it is garbled, it is NOT the garbled text of a wrong baud rate. Rather, it looks like

I am having a problem with asterisk voice mail messages that seems to be intermittent. Though the problem occurs most of the time, on rare occasions it will work fine - rare enough that I can't pin down what it is that works. The problem is that voice mail message get played back garbled. Occasionally, I can make out moments of a voice or another sound that may be in the actual message,

Hi, I've had problems with MixMonitor recordings. A lot (I'd say almost 50%) of those are corrupted (can`t be opened) or garbled. That is on only one server, which is using the same Asterisk version (1.6.2.18) as the other servers which are mostly fine. What can be the cause? The conversation themselves are reportedly of good quality, only the recording is a problem. Hint:

Hello, I have problem that menus on windows soft under wine are garbled (mojibake.) I'm Japanese and I've just started to use wine under CentOS5 because I want to use English-Japanese dictionary viewing software. Installing wine is fine both English and Japanese locale where wine related soft displays Japanese correctly even on menus. But my dictionary viewing soft under wine has

I've been having random problems when I make long distance calls using either VoicePulse or Nufone. Sometimes the calls go through clear, and other calls (or even just part of a call) the person on the other end just hears garbled voice, or really broken up voice. Sometimes it lasts for only a few seconds, but other times it goes on for a few minutes until I give up on the call. At

Hi all I am using asterisk 11.24.1 on a centos 5 machine. kernel 2.6.18 flavor. (x86_64). I have about SIP 150 endpoints on it. when I send a message I'm getting garbled audio. I used to have a single PRI card in the box - but something happened and that connection no longer worked. I removed the card and also removed the system.conf and chan_dahdi entries. I am using ConfBridge in a PA

Hi everyone Ok this is really strange. I''ve been messing around with Xen for the past few weeks on a 32bit test machine and CentOS 5.4 and it''s been working fine. At the weekend I went into the office to install Xen on our server but I had a major problem. The server is a home-build with a Tyan s5211 motherboard with an Intel i3210w chipset CentOS 5.4 64bit installed and

http://bugs.freedesktop.org/show_bug.cgi?id=10957 Summary: Garbled console text with XAA enabled Product: xorg Version: 7.1 Platform: Other OS/Version: All Status: NEW Severity: normal Priority: medium Component: Driver/nouveau AssignedTo: nouveau at lists.freedesktop.org ReportedBy:

Dear George, Thanks for the input and ideas. Unfortunately bootscrub=false dos not work, not does setting nothing for vga, still get the 'Little white squares'! I am asking the xen-users as you suggest Regards, Francis From: "George Dunlap" <dunlapg at umich.edu> To: "Francis Greaves" <francis at choughs.net>, "centos-virt" <centos-virt

Full_Name: Ross Boylan Version: 2.10.0 OS: Windows XP Submission from: (NULL) (198.144.201.14) Some of the help for setGeneric seems to have been garbled. In the section "Basic Use", 5th paragraph (where the example counts as a single line 3rd paragraph) it says <quote> Note that calling 'setGeneric()' in this form is not strictly necessary before calling

For some reason a couple weeks ago users began experiencing garbled audio in one direction when dialing out via our VoIP provider. This happened at multiple sites simultaneously. The VoIP provider doesn't think it's their problem. If I switch to another codec so that Asterisk transcodes everything is fine. On conference calls (where Asterisk gets in the middle to relay ulaw to all

I wrote an R wrapper function (phylpro) around a C function (Rphylpro). The first time I'm running my function, it runs with no errors. The second time I'm trying to run it, I get an error message with the first argument to .Call garbled. Set up: > dyn.load("Phylpro.so") > source("phylpro.R") > WinHalfWidth<-30 > permReps<-10 > breaks<-c(548,

https://bugs.freedesktop.org/show_bug.cgi?id=60150 Priority: medium Bug ID: 60150 Assignee: nouveau at lists.freedesktop.org Summary: [NVAF] Garbled Screen QA Contact: xorg-team at lists.x.org Severity: normal Classification: Unclassified OS: All Reporter: nihilhill at gmail.com Hardware: Other

I'm getting garbled playback with decoded fragments and I'm hoping someone here can point me in the right direction to correcting the problem. Essentially I'm capturing audio from the microphone. I stream it over the net, but for testing purposes with this API I'm just grabbing the whole chunk and encoding / decoding it right away and then updating the sound buffer for

problem - occasional garbled calls, mostly remote users. T1 connected to PSTN, SIP over local LAN and internet to "remote users". NAT at local firewall and at remotes. There is no traffic shaping in place, no QoS. Most are Polycom phones, two Aastra's. Start with QoS on LAN switches? No 2x4's please, start with 1x4's. joe a.

Hello, While using the "plot" function against a model with a long formula, I get a garbled label in the bottom of the plot. It looks like there are two lines printed one over another, here's my example: http://pico.magnum2.pl/maciej/NodalInvolvement/MisclassificationRate?action=AttachFile&do=get&target=TwoFactorResiduals.png This was from using

Yes I usually work headless, but I have been setting it up from new, so need to see what is going on. Regards Francis From: "Scot P. Floess" <sfloess at nc.rr.com> To: "Francis Greaves" <francis at choughs.net> Cc: "centos-virt" <centos-virt at centos.org> Sent: Monday, 22 February, 2016 17:02:12 Subject: Re: [CentOS-virt] Garbled screen

Upstream QEMU recommends to use '-display none' as opposed to '-nographic' -- which is a "legacy option that does a whole bunch of confusing stuff" (thanks Peter Maydell). Upstream libguestfs already made the switch [1] in DEC-2013. [1] https://github.com/libguestfs/libguestfs/commit/7a41f5c1 -- "launch: switch from -nographic to -display none " ---