similar to: [HCL] CyberPower Systems PR6000LCDRTXL5U supported by usbhid-ups

CyberPower OR700LCDRM1U (http://www.cyberpowersystems.com/products/ups-systems/smart-app-ups/rackmount-lcd/OR700LCDRM1U.html) upsc output: battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 20 battery.mfr.date: CPS battery.runtime: 6000 battery.runtime.low: 300 battery.type: PbAcid battery.voltage: 14.5 battery.voltage.nominal: 12 device.mfr: CPS device.model: UPS OR700

Dear Charles, thanks for your quick answer and your information! I didn't know there is a difference in the PR-series between old and new. So thanks for this valuable information! usbconfig dump_device_desc shows: ugen0.2: <CyberPower Systems product 0x0601> at usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON (50mA)

On Nov 10, 2017, at 5:31 PM, Christoph Lampl <chris at weeone.de> wrote: > > Dear Charles, > > thanks for your quick answer and your information! I didn't know there is a difference in the PR-series between old and new. So thanks for this valuable information! Just a lucky guess :-) We tend not to know about changes like this until someone reports an issue. > >

[shutdown sequence] I have tested and verified the shutdown sequence works. [manufacturor] https://www.cyberpowersystems.com/product/ups/ec350g/ mbeisser at nas:~$ upsc ups Init SSL without certificate database battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 20 battery.mfr.date: CPS battery.runtime: 1575 battery.runtime.low: 300 battery.type: PbAcid battery.voltage: 9.3

CyberPower Battery Backup with Surge Protection, model LE825G Appears to function properly with the driver listed on the HCL for the Cyber Power Systems ups 2 685AVR USB (usbhid-ups). Tested with shutdown mode "UPS Goes On Battery" with a 5 second timer and the system successfully shutdown as expected. upsc output: upsc ups battery.charge: 100 battery.charge.low: 10

Cyberpower CPS850avrlcd https://www.cyberpowersystems.com/product/ups/cp850avrlcd/ shutdown sequence: UNTESTED upsc output: _____  sudo upsc cp-ups battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 20 battery.mfr.date: CPS battery.runtime: 1230 battery.runtime.low: 300 battery.type: PbAcid battery.voltage: 13.5 battery.voltage.nominal: 12 device.mfr: CPS device.model: UPS

On Monday 26 October 2020 09:01:31 Charles Lepple wrote: > On Oct 25, 2020, at 11:52 AM, Robert Stocker <kneadtoknow at gmail.com> wrote: > > Init SSL without certificate database > > battery.charge: 100 > > battery.charge.low: 10 > > battery.charge.warning: 20 > > battery.mfr.date: CPS > > battery.runtime: 15690 > > battery.runtime.low: 300

UPS - CYBERPOWER CPS DX600E upsc usb at localhost battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 20 battery.mfr.date: CPS battery.runtime: 1650 battery.runtime.low: 300 battery.type: PbAcid battery.voltage: 4.8 battery.voltage.nominal: 12 device.mfr: CPS device.model: DX600E device.type: ups driver.name: usbhid-ups driver.parameter.pollfreq: 30 driver.parameter.pollinterval: 2

Cyber Power Systems AVRG750U https://www.cyberpowersystems.com/product/ups/avrg750u/ upsc output: battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 20 battery.mfr.date: CPS battery.runtime: 15360 battery.runtime.low: 300 battery.type: PbAcid battery.voltage: 24.0 battery.voltage.nominal: 24 device.mfr: CPS device.model: AVRG750U device.serial: <REDACTED> device.type: ups

I have a CyberPower PR3000LCDRTXL2U with a BP48V75ART2U expansion chassis, which I am monitoring using NUT 2.8.0 (on Gentoo Linux). TThe UPS appears to be telling me that the batteries need replacement due to age. CyberPower support has confirmed that for me and told me how i should be able to mute the alarm from the front panel until I can replace the batteries, but it doesn't appear

[updated] OpenBSD 6.1/amd64 NUT 2.7.4p0 (from OpenBSD package) Results of upsc: battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 20 battery.mfr.date: CPS battery.runtime: 2902 battery.runtime.low: 300 battery.type: PbAcid battery.voltage: 26.9 battery.voltage.nominal: 24 device.mfr: CPS device.model: CP1500AVRLCDa device.serial: CTHGN200xxxx device.type: ups driver.name:

This was very helpful for me, thank you! On Sat, Oct 24, 2020 at 9:06 AM Charles Lepple <clepple at gmail.com> wrote: > The easiest way to tell if upsd is working is to run "upsc -l" on the same > system, which will list the NUT UPS names, and then run e.g. "upsc mge" > (replacing "mge" with the name returned by "upsc -l") > Here was the

CyberPower Value 1500ELCD-RU root at ubuntu:/home/oper# upsc myups at localhost battery.charge: 87 battery.charge.low: 10 battery.charge.warning: 20 battery.mfr.date: CPS battery.runtime: 5220 battery.runtime.low: 300 battery.type: PbAcid battery.voltage: 16.5 battery.voltage.nominal: 24 device.mfr: CPS device.model: Value1500E device.type: ups driver.name: usbhid-ups driver.parameter.pollfreq:

I didn't want to sign up for the nut-devs list or create a git account just to provide this information, so I hope posting this info here is OK... I just bought a Cyber Power Systems EC750G UPS for use as a spare. Here are some info for it: ========================= upsc output: battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 20 battery.mfr.date: CPS battery.runtime:

Hello, I have the Cyberpower USB CP550SL RT< whats its called when i bought it :) (AE550 according to upsc) and i think its missing some monitor options such as load, wattage use, temp..etc (shows in powerpanel pro,personal ed under win) ..it seem to be really lacking the only options i get are battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 20 battery.runtime: 4560

OpenBSD 6.1/amd64 NUT 2.7.4p0 (from OpenBSD package) Results of upsc: battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 20 battery.mfr.date: CPS battery.runtime: 2902 battery.runtime.low: 300 battery.type: PbAcid battery.voltage: 26.9 battery.voltage.nominal: 24 device.mfr: CPS device.model: CP1500AVRLCDa device.serial: CTHGN200xxxx device.type: ups driver.name: usbhid-ups

Hello I have an issue with an CyberPower DX600E, it doesn't switch up when the power is back; after it has been unloaded; is it because of one of those variables ? regards Franck #upsc myups battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 20 battery.mfr.date: CPS battery.runtime: 1380 battery.runtime.low: 300 battery.type: PbAcid battery.voltage: 4.7

Hey all, I ended up picking up the module listed in Subject line. I switched over my config but apparently not all going smoothly. My config is: [office] driver = powerpanel port = /dev/ttyS0 desc = "Office UPS" When I test the driver running power-panel as a test, I get: > [root at cornelius init.d]# powerpanel -a office -D -D -D -D >

Hey guys, :) recently, I installed Cyberpower PR2200ELCDRT2U, however, I have not managed to get this UPS working with FreeNAS 11, yet. According to compatibility list, PR2200 should work fine, when using powerpanel driver: http://networkupstools.org/ddl/Cyber_Power_Systems/ http://networkupstools.org/ddl/Cyber_Power_Systems/PR2200.html However, when trying to establish a connection between

> Subject: [Nut-upsuser] CyberPower DX600E won't switch up after power > is back > Message-ID: <3c530815d1ea602efdfec0d67eb1e0b1 at secretfatty.net> > Content-Type: text/plain; charset=UTF-8; format=flowed > > Hello > I have an issue with an CyberPower DX600E, > it doesn't switch up when the power is back; after it has been > unloaded; > is it because