similar to: Regd: Iptables SNAT issue in Cluster Suite Setup

OpenBSD 5.6 nut-2.7.2 (bin package) Liebert IntelliSlot Unity Card IS-UNITY-DP ups.conf: ...... ? mibs = ietf ? snmp_version = v1 ...... The problem is that the card responds to other snmp (v1,2c,3) requests normally but not to the 1.3.6.1.2.1.33.1.1.1.0 (UPS-MIB.upsIdentManufacturer). # snmp-ups -a laes2ups -DDDDDDD Network UPS Tools - Generic SNMP UPS driver 0.72 (2.7.2) ?? 0.000000???? debug

Dear All, I am using the following rules in firewall scripts /sbin/iptables -F INPUT /sbin/iptables -F OUTPUT /sbin/iptables -F FORWARD /sbin/iptables -F RH-Firewall-1-INPUT # Default Rule /sbin/iptables -P OUTPUT ACCEPT /sbin/iptables -P INPUT ACCEPT /sbin/iptables -P FORWARD ACCEPT Rsync Source NAT rules is iptables

Dear All, Please ignore my previous mail I have using CentOS 4.4 Linux and Kernel Version is 2.6.9-42.EL I have configured Cluster Suite with 2 servers Server 1 : 192.168.13.110 IP Address and hostname is primary Server 2 : 192.168.13.179 IP Address and hostname is secondary Floating : 192.168.13.83 IP Address (Assumed by currently active server) I have configured Ethernet Channel Bonding in

Dear All, My Requirement is 1. I am taking backup from client to server and i configured floating IP Address at the client 2. From primary or secondary server rsync command will be triggerd via floating IP Address to the client PC I am using the following rules in firewall scripts /sbin/iptables -F INPUT /sbin/iptables -F OUTPUT /sbin/iptables -F FORWARD

On 02.10.2014 03:42, Charles Lepple wrote: > On Oct 1, 2014, at 5:07 AM, Tarvo.Tiits at automaatika.ee wrote: > >> Why is ups.status empty? > If I understand the commit log for SVN r3590, then that revision was supposed to set the status to OL if the numeric state was 9 for ECO mode. It does not appear to do that: > >

Hi I''ve patched net-mrtg http://www.net-snmp.org/ with http://x-ray.prokon.cz/data/snmp/ sucefully Also I''ve copied QOS.TXT to /usr/local/share/snmp/mibs when I make a normal use of snmp, with mrtg in order to monitor all traffic on eth0 and eth1, it works OK. But, how must I do in order to get monitor for a specific class ? If I make a snmpwalk (like README suggest), I get

On Oct 2, 2014, at 1:53 AM, Tarvo Tiits <Tarvo.Tiits at automaatika.ee> wrote: > On 02.10.2014 03:42, Charles Lepple wrote: >> On Oct 1, 2014, at 5:07 AM, Tarvo.Tiits at automaatika.ee wrote: >> >>> Why is ups.status empty? >> If I understand the commit log for SVN r3590, then that revision was supposed to set the status to OL if the numeric state was 9 for

nut-2.6.5 Scientific Linux 6.3 APC AP9630 management card My basic question is, does nut's SNMPv3 implementation work? I have this in /etc/ups/ups.conf ...... [tfapc01] driver = snmp-ups port = tfapc01.testfest.ixorg.org mibs = apcc snmp_version = v3 secLevel = authPriv secName = tfsnmpprof1 authPassword = ralow6moHet7zoboP8 privPassword = tuseL8Pakaz9degim7 authProtocol=MD5

G'day I'm currently using NUT on Debian squeeze box in the same subnet with an IBM 3000 HV (branded Eaton 5125 with Web/SNMP card), now I wanted to get our storage appliance running NexentaStor 3.1 set up to be using NUT too. Nexenta- Stor is an OpenSolaris / illumos-based appliance OS currently using NUT packages from ubuntu hardy. My question here is whether I'm running into a -

Dear All, I have configured Cluster Suite with 2 servers Server 1 : 192.168.13.110 IP Address and hostname is primary Server 2 : 192.168.13.179 IP Address and hostname is secondary Floating : 192.168.13.83 IP Address (Assumed by currently active server) I have configured Ethernet Channel Bonding in Each Cluster Nodes and Channel Bonding Configuration Details are 1) Created bonding devices in

Couple of little things I noticed with a new RELENG_7 AMD64 box (as of yesterday) ifstat from the ports cannot seem to find interfaces for some reason ? It works fine on i386 [ns8]# ifstat -b ifstat: no interfaces to monitor! [ns8]# [ns8]# ifconfig em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500

Hi all! I know this is quite offtopic, but I found nothing in google nor in the net-snmp mailing list, and I know there''s a lot of people here graphing with snmp+rrdtool. I installed net-snmp 5.1.2-6.1 in Debian to produce graphs for some ethernet interfaces. It seems it''s not reporting correct values for them. Here''s my snmpd.conf (very simple) and the output from the

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I figured out why nut seemed to segfault at startup from my Solaris boxes (and snmp-ups too) - I believe that nut is trying to use some MIBs that do not exist on my particular PW9170, for whatever reason. It dies on my Linux box too, complaining like this: pkdick:~/nut/bin# ./snmp-ups -x mibs=pw -x community=publicstring upsname Network UPS Tools -

I have a Cisco 6509 switch that I'm monitoring with SNMP from a CentOS5 machine. SNMP polls are the only access I have to this device, we are not allowed to log on via telnet. How can I find out which port on the switch a particular server is connected to? I was hoping that this is somehow possible using the mac address and the data gathered from snmpwalk/snmpget requests but I'm not

Hi John, do you have the device (which one? An old SNMP WEB or new UNITY DP or something else?) Or you like to buy one? If you have (or you can buy) the old one SNMP WEB - then nut should work fine with it via generic snmp driver and you don't need anything else. If you have (or you must buy) the new one UNITY DP - then I can share my snmp subdriver for it, and you should insert this

I'm in the process of trying to get NUT to manage an APC SmartUPS. Monitoring of the UPS is working fine: $ upsc nutdev1 at localhost Init SSL without certificate database ambient.1.humidity.alarm.high: 60.00 ambient.1.humidity.alarm.low: 30.00 ambient.1.temperature.alarm.high: 40.00 ambient.1.temperature.alarm.low: 10.00 battery.charge: 94.00 battery.charge.restart: 0 battery.current: 0.00

R 2.2.0 windows XP I am beginning to explore the mitools package contributed by Thomas Lumley (thank you Thomas) and I have a few questions: (1) In the examples given in the mitools documentation, the only family argument used is family=binomial. Does the package support family=gaussian and other link functions? I ran the with function with family=gaussian and I obtained results, but I am not

I did a bunch of work on this today. It should be all set to go. This patch is to add support for the Cyberpower RMCARD snmp cards. I basically copied the driver for bestpower, changed the name and updated the mib map. I have this running on two separate systems (two separate ups's) and it looks good. The only thing I could not figure out was updating the Makefile.am (my aclocal/libtools

On Oct 1, 2014, at 5:07 AM, Tarvo.Tiits at automaatika.ee wrote: > Why is ups.status empty? If I understand the commit log for SVN r3590, then that revision was supposed to set the status to OL if the numeric state was 9 for ECO mode. It does not appear to do that: https://github.com/networkupstools/nut/commit/9cb2de3d9568aa382cc118b4385d97d5664c457b Is your UPS set to ECO mode? Can you do

Hi All, I am a new member of this list. I want to know about a way to monitor the traffic shaping setup to confirm whether it is working as expected. I went through the archives of this list and found some pointers related to tc-snmp extension/patch for net-snmp and some perl scripts on www.docum.org. I want to know whether this type of a setup work. Or else is there any other way ? Actually I am