Displaying 20 results from an estimated 400 matches similar to: "CyberPower UPS Help"
2012 Feb 22
1
[HCL] CyberPower OR700 supported by usbhid-ups
CyberPower OR700LCDRM1U (http://www.cyberpowersystems.com/products/ups-systems/smart-app-ups/rackmount-lcd/OR700LCDRM1U.html)
upsc output:
battery.charge: 100
battery.charge.low: 10
battery.charge.warning: 20
battery.mfr.date: CPS
battery.runtime: 6000
battery.runtime.low: 300
battery.type: PbAcid
battery.voltage: 14.5
battery.voltage.nominal: 12
device.mfr: CPS
device.model: UPS OR700
2008 Dec 01
1
Tripp Lite G1000U (0x2007)
Hello,
I'm new to the list, new to NUT, but not new to Unix-likes. I
could use some help getting NUT to talk to my Tripp Lite G1000U.
Searching Google for "Tripp Lite G1000U" returns exactly two hits
at this writing, so that may not be a good sign. ;-) It may just
be rebranded for sale through this source (Costco).
Externally, the G1000U looks much like the SMART1000LCD: an amber
2009 May 18
3
Cyberpower Value 600E UPS (USB) is not recognized by usbhid-ups under FreeBSD 7.2
Hi,
Have anybody tried Cyberpower Value 600E (USB) under FreeBSD?
usbhid-ups from nut 2.4.1 does not recognize (find) the device on my
machine.
[root at substance /usr/local/libexec/nut]# uname -a
FreeBSD substance.dyndns.org 7.2-RELEASE FreeBSD 7.2-RELEASE #0: Fri
May 1 08:49:13 UTC 2009
root at walker.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386
[root at substance
2012 Aug 10
1
Zigor Ebro 650 compatibility
On 10/08/2012 21:58, nut-upsuser-request at lists.alioth.debian.org wrote:
>>> Arnaud Quette<aquette.dev<at> gmail.com> writes:
>>>> 2012/6/3 Chris Rees<crees<at> freebsd.org>:
>>>>> Hi all,
>>>> Hi Chris,
>>>>
>>>>> After some research I've found that this device should run with the
2019 Jul 16
2
Trouble getting Roline/Powercom UPS recognized
Hi all,
I’m new to NUT and have some trouble getting my new UPS to work.
Since the HCL listed Powercom UHID models as „green“ I thought buying
a Roline (German rebranded Powercom) model would be a good idea.
The OS is FreeBSD:
FreeBSD freenas-pmh.local 11.2-STABLE FreeBSD 11.2-STABLE #0 r325575+6aad246318c(HEAD): Mon Jun 24 17:25:47 UTC 2019 root at
2006 May 06
3
No USB/HID UPS found
Hello,
Help me please with *newhidups* setup. Does it work for someone on *BSD ?
Here is the data.
---------------------------------------------------------------
*** FreeBSD
root.srv# uname -a
FreeBSD xxxxxx.dyndns.info 5.3-RELEASE FreeBSD 5.3-RELEASE #2: Tue Feb 8
07:38:22 UTC 2005
admin@temp.botka.homeunix.org:/usr/src/sys/i386/compile/SRV i386
*** NUT ver.2.0.3
root.srv# ll /var/db/pkg/
2020 Mar 28
2
CentOS 8 w/gnome and NUT
I'm playing with a new CentOS 8 with a cyperpower OR500 (a smaller sibling to the OR700) plugged in via USB.
GNOME sees the UPS... but NUT does not (even if I shut down gnome).
> [root at delp ups]# upsdrvctl start
> Network UPS Tools - UPS driver controller 2.7.4
> Network UPS Tools - Generic HID driver 0.41 (2.7.4)
> USB communication driver 0.33
> No matching HID UPS found
2014 Feb 06
2
Question on support for Upsonic Commercial UPS CXR 2000 - 2000VA/1200W - Rack/Tower on Freebsd 9.1.
On 2/5/14, 9:55 PM, Charles Lepple wrote:
> On Feb 5, 2014, at 9:03 PM, Chris Duffy wrote:
>
>>> Please run this:
>>>
>>> /usr/local/libexec/nut/blazer_usb -a UPSonic -u root -D
>>>
>>> and send the output back to the list.
>>>
>> Output from the above command:
>>
>> 0.000000 debug level is '1'
>>
2014 Feb 06
0
Question on support for Upsonic Commercial UPS CXR 2000 - 2000VA/1200W - Rack/Tower on Freebsd 9.1.
On Feb 6, 2014, at 8:41 AM, Chris Duffy wrote:
> 0.016485 Trying megatec protocol...
> 0.017411 send: Q1
> 0.252545 read: (244.4 244.4 229.9 028 50.0 2.19 23.1 00000001
> 0.252589 Status read in 1 tries
> 0.252602 Supported UPS detected with megatec protocol
> 1.288032 send: Unknown error
> 1.288085 Permissions problem: Input/output error
2012 Jun 03
6
Zigor Ebro 650 compatibility
Hi all,
After some research I've found that this device should run with the
blazer_usb driver.
Jun 3 16:15:38 pegasus kernel: ugen0.4: <vendor 0x0001> at usbus0
Jun 3 16:15:38 pegasus kernel: uhid0: <vendor 0x0001 product 0x0000,
class 0/0, rev 1.00/1.00, addr 4> on usbus0
However, even after shoehorning it;
[crees at pegasus]/usr/local/libexec/nut% sudo ./blazer_usb -a zigor
2009 Aug 12
1
Cannot get Tripplite su2200xla working on freebsd 7.1 nut 2.4.1
All:
I am having a devil of a time getting nut to work on freebsd. Here is what I
have done. I am trying to load the drivers, and here is my ups.conf file:
[tripplite]
driver=trippliteesu
port=auto
When I dmesg on freebsd 7.1 for my usb device:
uhid0: <Tripp Lite TRIPP LITE UPS, class 0/0, rev 1.10/0.00, addr 2> on
uhub0
using the usbdevs -v command:
Controller /dev/usb0:
addr 1:
2008 Jul 03
4
NUT with PowerWalker vi 400 se (usb).
Hi.
I'm from Russia.
I try to use NUT with PowerWalker vi 400 se (usb).
I use FreeBSD 7.0 (amd64) and megatec_usb driver.
Settingup the NUT with FreeBSD installation procedure (Thierry Thomas, from FreeBSD).
PowerWalker connect to the computer by usb cable on port usb0 (uhib0).
NUT don't starting, and talk to me that supporting device not found.
Please, help me.
Thank's! With best
2008 Feb 25
2
"No matching HID UPS found" with TrippLite SMX1500LCD
Hi list-
I'm having problems with TrippLite SMX1500LCD not being detected by
NUT under FreeBSD 6.3-RC2. NUT 2.2.1 was installed from ports with the
following options:
WITH_USB=true
WITH_SNMP=true
WITHOUT_IPV6=true
WITH_LIBUPSCLIENT=true
WITH_CGI=true
I use USB cable shipped with TrippLite and 'usbdevs -v' shows the following:
...
Controller /dev/usb2:
addr 1: full speed, self
2014 Feb 06
2
Question on support for Upsonic Commercial UPS CXR 2000 - 2000VA/1200W - Rack/Tower on Freebsd 9.1.
Thx Charles,
So since this is a new type of UPSonic UPS, do you think
the vendor screwed up or is it just some quirk on Freebsd?
Yes, if you can look into this I would appreciate it.
I do not see anyone else on the Web attempting to use
this new device yet.....but.......
Regards
chris
On 2/6/14, 8:24 AM, Charles Lepple wrote:
> On Feb 6, 2014, at 8:41 AM, Chris Duffy wrote:
>
>>
2014 Aug 11
1
Cyberpower Value1200E might not need 0.667 battery scaling
Attached is the first 32 seconds of the driver output after applying the
patch which fixes the battery scaling problem for this UPS.
Matthew Stapleton
Email: matthew4196 at gmail.com
On 10/08/14 01:27, Charles Lepple wrote:
> On Aug 8, 2014, at 9:15 AM, Charles Lepple <clepple at gmail.com> wrote:
>
>> On Aug 7, 2014, at 10:52 PM, Charles Lepple <clepple at gmail.com>
2018 Mar 07
3
Problem with USB <---> UPS management connection
Hi, colleagues!
Something strange happens with a server. I am attempting to connect management interface of UPS with server via USB.
In console I see a lot of errors:
Mar? 7 13:42:04 xxx kernel: ugen2.2: <POWERCOM Co.,LTD HID UPS Battery> at usbus2
Mar? 7 13:42:05 xxx kernel: uhid0 on uhub6
Mar? 7 13:42:05 xxx kernel: uhid0: <POWERCOM Co.,LTD HID UPS Battery, class 0/0, rev 1.10/0.02,
2003 Nov 26
1
perms of /dev/uhid0
I wrote a small app that monitors a Back-UPS ES500 UPS via the uhid0
interface. I want to run the daemon with as little privs as possible.
gastest# ls -l /dev/uhid0
crw-rw---- 1 root operator 122, 0 Nov 12 05:26 /dev/uhid0
gastest#
Is it safe to chmod o+r /dev/uhid0 ? Or is there a better way to drop
privs of the daemon yet still be able to read from the device ?
All I am doing is
2019 Mar 25
0
samba 4.9.5 - joining Samba DC to existing Samba AD failed
On Mon, 25 Mar 2019 15:12:16 +0100
franta via samba <samba at lists.samba.org> wrote:
> Hi team,
> I have Samba (4.9.5) AD DC, and when trying to add second DC, join
> fail:
>
> # samba-tool domain join zamecek.home DC
> -U"SSUPS-ZAMECEK\administrator" --option='idmap_ldb:use rfc2307 =
> yes' --dns-backend=BIND9_DLZ Finding a writeable DC for domain
2008 Jan 30
0
Anybody have expirience with Powercom Imperial 1500 VAC (USB interface)?
Hello !
Anybody have expirience with Powercom Imperial 1500 VAC (USB interface) ?
Under FreeBSD 6.2 it's shown as uhid device:
uhid0: POWERCOM CO., LTD. USB to Serial, rev 1.00/0.00, addr 2, iclass 3/0
usbhid-ups doesn't recognize it, and powercom driver doesn't work with
uhid device.
It seems for me that FreeBSD doesn't support it, so it doesn't create
serial device for
2019 Mar 25
0
samba 4.9.5 - joining Samba DC to existing Samba AD failed
Hi,
That failure is a little odd. It's replicated all the DB objects, but is
failing trying to commit the transaction. It looks like the error is
happening trying to get the objectClass for the Administrator user. The
weird thing is it should have already successfully passed this check
once when it first received the object.
You could try the following:
1. If you run 'samba-tool