similar to: No shutdown on empty battery

Hello guys Yesterday i started do configure my Mustek Powermust650 with nut using the megatec_usb driver. Everything works fine except for the mailing when something happens. My upsmon looks like this: MONITOR powermust650 at localhost 1 local controller master MINSUPPLIES 1 SHUTDOWNCMD "/sbin/shutdown -h +0" NOTIFYCMD /root/upsmailer POLLFREQ 10 POLLFREQALERT 5 HOSTSYNC 15

Hi Everyone, I recently bought a Tripp-Lite SMART1500LCD for my Linux Mint 19.3 machine, connected via a USB cable. I installed Nut 2.7.4 from the Mint package repository via sudo apt update && sudo apt install nut. Everything works great: NUT issues low battery warning when it reaches the set low battery point and then issues shutdown commands...computer shuts down..then the UPS shuts

Hi, I have been running nut successfully for a long time with my Debian 11 server. I upgraded my server to Debian 12 today, which upgraded nut also from 2.7.4-13 to 2.8.0-7. I noticed that after upgrade there was a upssched process running and taking 100% cpu time. I checked if there were any changes to configuration file formats with nut upgrade and only differences I noticed were a terminology

hello, i've got a problem with the notifycmd here is a part of my upsmon.conf : NOTIFYCMD /usr/local/ups/bin/nut_notify NOTIFYMSG ONLINE "UPS %s is getting line power" NOTIFYMSG ONBATT "UPS %s is on battery" NOTIFYMSG REPLBATT "The UPS %s battery is bad and needs to be replaced" NOTIFYMSG LOWBATT "UPS %s is being shutdown by the master" NOTIFYMSG FSD

I've not been able to connect to my ups using NUT 2.7.4 or NUT 2.8.0. 2.7.4 was installed as a package, 2.8.O was compiled from source. I've messed with permissons, everything is root:root and has the approprate read/execute permissons. I've tried two differnt UPS(es) APC & CyperPower. I'm running PI OS (Raspbian) on a Raspberry Pi3 model B. The port 3493 is open (UFW). I can

On Thu, 8 Jun 2017, Robbie van der Walle wrote: > After the first test and the NAS is restarted I had to change the > setting battery.charge.low again to 80? Does the NAS DSM reset battery.charge.low to 10 or is it internal to the UPS? You will have to experiment by disconnecting the UPS control lead from the NAS and connecting it (if possible) to the Mac. After setting to 80 and a

On Tue, 4 Apr 2017, Arnaud Quette wrote: > Hi Jon, Stuart and the list > > 2017-04-04 1:09 GMT+02:00 Stuart Gathman <stuart at gathman.org>: > Which NOTIFYCMD is run when there is an ALARM? > Have you specified that in your upsmon.conf? > > And that is the question of the hour.? How do you specify that?? Note > that this is not the REPLBATT

Ah! So I can detect the source UPS in the upssched.conf and pass it as a distinct event to the shell script. That sounds like an excellent approach. Thanks! GMH From: O'Shaughnessy, Mike [mailto:Mike.OShaughnessy at gd-ms.com] Sent: Tuesday, October 31, 2017 12:46 PM To: Garrett Michael Hayes <Garrett at VerbalImaging.com>; nut-upsuser at lists.alioth.debian.org Subject: RE: Email

Hello dear all, I try to use NUT for windows (not WinNUT), and stuck with launching NOTIFYCMD. On any event marked as SYSLOG+WALL+EXEC syslog entry appears, popup window appears, but NOTIFYCMD script doesn't run. If I run upsmon.exe in cmd (i. e. not as a service) everything works fine. Here is my upsmon.conf: MONITOR central at 10.35.0.180 1 user password slave MINSUPPLIES 1 SHUTDOWNCMD

On Tue, 27 Oct 2015, George Anchev wrote: > Yes, that was the power off test. However the upssched-cmd script gave > absolutely no signs of activity. Even it's logger lines don't show up in > journalctl. No any permission error messages - nothing. Only the 2 > messages from upsmon - on battery and then on line power. > > Here is the nut-report: >

I've built NUT 2.8.0 from source. When the nut-monitor runs: fopen upsmon.pid fails. I'm running as root, upsmon has root:root permissions as well as the other daemons and .conf files. I've tried configuring with and without --prefixpath --prefixaltpath. Is there something I am missing? Please see attached. Dan -------------- next part -------------- An HTML attachment was

Charles, This is how I have the upsmon.conf set up. ?The only time I get a message is if the?NUT Monitor gui is running. ?I open LXterminal, pull the wall plug, and I get no messagesin the terminal. ?MONITOR Asium_p700 at localhost 1 upsmon jsamcr master?MINSUPPLIES 1?SHUTDOWNCMD "/sbin/shutdown -h +0"?NOTIFYCMD /sbin/upssched?POLLFREQ 5?POLLFREQALERT 5?HOSTSYNC 15?DEADTIME

Hi, I cant seem to get my upssched to get called by upsmon. Upsmon -c fsd just shuts down without the message I set or the one in upssched-cmd /etc/ups/upsmon.conf: MONITOR ups6 at localhost 1 <user> <pass> master MONITOR ups8 at localhost 1 <user> <pass> master SHUTDOWNCMD "/sbin/shutdown -h +0" NOTIFYCMD /usr/sbin/upssched NOTIFYMSG

Thanks mates, as suggested I have added runtimecal = 240,100,720,50 default.battery.voltage.low = 10.4 default.battery.voltage.high = 13.8 (the actual charging voltage) In ups.conf I have also added the startup procedure in rc.local file, everything is fine... I have only to make a deep test. Is there a way to add a NOTIFYMSG value for the battery test? Thank you lots Andrea

Now that upsstats.cgi works, I've noticed that dummy-ups changes state every 5 minutes between OL and OB (probably when the 300 second timer expires). The UPS state stays online. Also "online" and "onbatt" are broadcast to the console probably via WALL. (The state changes don't seem to be form the ups as upsshed-cmd doesn't run). Upssched-cmd does run when the UPS

Hi, I have problem with upssched on windows. Upssched is not executed. I have 2 scripts, 1 for notification in upsmon and second for scheduling in upssched. Monitoring is working fine, script write to log. I'm using binary windows installer 2.6.5-6 from NUT. Here are my configs: --- nut.conf MODE=netclient --- upsmon.conf MONITOR ups_1000 at 192.168.3.95 1 <user> <password> slave

Yes, that was the power off test. However the upssched-cmd script gave absolutely no signs of activity. Even it's logger lines don't show up in journalctl. No any permission error messages - nothing. Only the 2 messages from upsmon - on battery and then on line power. Here is the nut-report: http://www.filehosting.org/file/details/518300/NUT.report --- George Anchev On Tue, Oct 27,

OS name and version, MASTER SYSTEM has three APC smart UPS 3000 UPS connected via USB debian 8 "jessie" Linux pdxvhtst01 3.16.0-4-amd64 #1 SMP Debian 3.16.43-2+deb8u5 (2017-09-19) x86_64 GNU/Linux SLAVE SYSTEMS monitoring MASTER via IP debian 8 "jessie" Linux geaaetst01

MASTER SYSTEM nut.conf MODE=netserver ups.conf [TOPAPC] driver = usbhid-ups port = auto pollonly serial = "IS1309002707" desc = "TOPAPC" [MIDAPC] driver = usbhid-ups port = auto pollonly serial = "IS1309001233" desc = "MIDAPC" [BOTAPC] driver = usbhid-ups port = auto