similar to: LVM question

Dear All, My name is Muhammad Panji (MuhammadPanji on Wiki). I would like to help translation of wiki to Indonesian language. How should I start or whom should I coordinate with if there are already Indonesian translator. Thank you. Regards, -- ----- Muhammad Panji http://www.panji.web.id http://www.kurungsiku.com http://sumodirjo.wordpress.com

Dear All, I have an onboard Realtek RTL8111/8168B NIC. from lspci -vv : 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) It is detected, but why the speed is always 100Mbps, already change cable but still no luck. I use ethtool and from the output it seems that system know that this NIC support gigabit speed : ???????

Hi All, On my gateway server I'm Installing CentOS on a flashdrive. is that a bad idea? the server keep hang, I can ping the server from the LAN and from the internet, the internet connection from LAN to internet is OK but another service is down, ssh, VPN (PPTPD) and another service. Even the console is unresponsive so I have to reset the server. Last time when I still can do SSH to server

CentOS Community, I was wondering if anyone had a good resource or procedure for a step by step in installing a mail server with Centos. There ARE documents on google, however almost all that i've found were outdated from 2005. Does anyone know where I can find this type of document for a mailserver Postfix + MySQL + SpamAssassin + ClamAV + Squirrelmail + Postfixadmin, etc?

Dear All, I plan to replace an error disk that is part of an LV. from LVM how-to it could be done with using pvmove to move all PE from old disk to new disk.But the howto also said that pvmove is slow. Anyone has experience using pvmove on 2TB disk? Is it possible to make all PE on the old disk empty so I don't have to do pvmove (assuming that I can make a free space >= 2TB). Thank you in

Dear all, I have a 4,1TB Logical volume consist of four disks with size of 2TB, 1TB, 1TB, and 500GB. The LV currently full. I plan to change the 1Tb disks and 500Gb disks. I plan to remove one 1TB disk or the 500GB so that I can replace it with 2TB disk. most LVM tutorial ask to use pvmove to move phisical extent to the new disk. The problem is that I have no SATA port left so that I can't

CentOS Community, What commands can I use to check the disk health of the system when LVM2 is being used on top of a RAID 10 using a HARDWARE 3ware raid card. The OS sees a hardware raid usually as one big drive. Is there a way to check the disks individually to see if any are failing, or throwing hard or scsi transport errors?

Hi I need some logic to work out a value for me - this value is _always_ the 3rd last field in a string seperated by '.' but the string could be 5 or 6 fields long, e.g foo.bar.VALUE.baz.lala foor.bar.gigi.VALUE.baz.lala I need to find VALUE - if this were python or something i could do it but this has to be in shell - Any clues? thanks

Gentlemen, I have a question regarding yum groupinstall vs just using yum install. I have been reading tutorials online (for example how to run a Centos LAMP). Most of the tutorials have examples to install httpd, mysql, etc using yum install httpd.... The reason for this e-mail is that I noticed in yum grouplist that there is an option to install Web Server, MySQL database server, etc.

Dear All, I have one VG with one LV inside consist of four disk (and four PV) somehow the UUID is changed. I try to restore with the last known good configuration and use pvcreate --uuid xxx --restorefile xxx but I think when I first time do it I did use wrong UUID for two device. but haven't only using command above and haven't used vgcfgrestore. After carefully read the configuration,

Dear all, I got weird permission on one of my server, when I ls -l the / i got permission for all directory set to "drwxr-xr-x." there are dot after the executable permission for others. what dot mean in permission and how to fix it? the actual problem is I could login via ssh but cannot login via winscp. any idea how to fix this? thanks in advance best regards, -- Muhammad Panji

Hi guys, Logrotate is checked every day by cron.daily, right? I notice in logrotate.conf by default it's weekly. If I change it into monthly (now, on 12 of Feb), when will it do the monthly rotation? a. On 12 of March or b. On 1st of March? Thanks for any insight.

I know this is a bit off topic from CentOS itself, but are there any DNS experts that would be able to e-mail me on the side and assist with some questions I have regarding TXT/SPF records? I want to ensure my mail doesn't bounce.

Hi all, I'm looking for a (preferably free) alternative to SME / Clark Connect. I basically need the following: - firewall - nat - VPN - bandwidth limiting / monitoring - email (SMTP / POP3 / IMAP) & groupware - file & printer sharing - RAID support - if possible fail-over / high availability support. I need to support about 15 - 30 (some part time) students, so I would like to keep

Good Evening All, I have a question regarding CentOS 6 server partitioning. Now I know there are a lot of different ways to partition the system and different opinions depending on the use of the server. I currently have a quad core intel system running 8GB of RAM with 1 TB hard drive (single). In the past as a FreeBSD user, I have always made a physical volume of the root filesystem (/),

CentOS Community, I have a dedicated server with 4 hard drives in a RAID 10 software configuration running LVM. My OS is CentOS 6.2. Earlier today, I rebooted my system and my system did not come back online. I opened a ticket with my datacenter who informed me that one of my hard drives is no longer recognized by the bios and has failed. I was told that an OS reinstall was needed. I

CentOS Community, Do you know how I can go about enabling system dumps and/or kernel core dumps. I want to be able to have the system dump a core during a panic, or crash.

When doing the 5.2 installation the ONLY drive option provided is mapper/nvidia_cbjcdhfe (250G) My system has 2 SATA - 250G drives and I want to use them in a RAID/LVM configuration. My question: How do I get the installer to let me use DiskDruid to create RAID1 arrays and then use LVM for the mount points? What I've done so far: I've verified that both drives are recognized by

I know this was discussed before, and I have seen a million ways of doing this via online docs. I have a quick question that hopefully the community can help me out with I am trying to add a block of 10 IP addresses. Rather then create 10 different alias files, I want to use the RANGE file. Docs say to use the following format: IPADDR_START=x.x.x.x IPADDR_END=x.x.x.x CLONENUM_START=0 If the

Good morning all, I currently have a website that was written in ASP back in 1999. The system is currently running Windows 2003 Server with MsSQL. Before everyone flames me for being in the wrong place, I was wondering if there is a way to allow centos to run old ASP code? I know years ago this wasn't possible without a program like ChiliASP, but noow I heard rumor that apache might have