similar to: Network UPS Tools version 2.6.3 released

Hi, Has anyone had success with the Dynamix 650VA, that uses the USB cable? I can't get megatec_usb to recognize it, I have tried both stable and development versions. Regards Glen Ogilvie

Hi, I have a Fenton Powerpal L660, when I try and configure nut with either the metatec or fentonups driver, and start upsd, the UPS instantly turns itself off. It used to work, until I changed my motherboard and CPU, which means it has a different bios and serial port setup. This is happening with Nut 2.0.1 and also Nut 2.0.5. I have an AMD64 bit processor, Mandriva 2007 64 bit. Any

On Dec 17, 2011, at 3:53 AM, Arnaud Quette wrote: > Author: aquette > Date: Sat Dec 17 08:53:41 2011 > New Revision: 3363 > URL: http://trac.networkupstools.org/projects/nut/changeset/3363 > > Log: > Try to fix language ID support for USB units from LDLC, Dynamix and no names in blazer_usb (reworked patch, from Brian R. Smith and Aur?lien Grenotton) ... > + if

2007/2/19, Glen Ogilvie <nelg@linuxsolutions.co.nz>: > Hi, > > I have a Fenton Powerpal L660, when I try and configure nut with either the > metatec or fentonups driver, and start upsd, the UPS instantly turns itself > off. > > It used to work, until I changed my motherboard and CPU, which means it has > a different bios and serial port setup. > > This is

2007/2/19, Glen Ogilvie <nelg@linuxsolutions.co.nz>: > Hi, > > I have a Fenton Powerpal L660, when I try and configure nut with either the > metatec or fentonups driver, and start upsd, the UPS instantly turns itself > off. > > It used to work, until I changed my motherboard and CPU, which means it has > a different bios and serial port setup. > > This is

Hi to everyone! I'm posting here after digging around the nut-upsuser and nut-upsdev mailing list, hoping I didn't miss something important. I'm trying to make my ups working with nut: it's a Tecnoware ERA LCD 0.85 which uses the so-hated UPSilon 2000 software to connect via usb. Personally I checked and seems that this junk software only works from windows, I'm trying to

On Dec 4, 2014, at 7:01 AM, janc at telefonica.net wrote: > I have got this output with driver usbhid-ups > > ups.conf > > [Phoenixtec] > driver = usbhid-ups > vendorid = 06da > productid = 0002 > port = auto > #~ langid_fix=0x0409 Oh, sorry - I meant for you to try that with blazer_usb. -- Charles Lepple clepple at gmail

Hi! all. I have been reading every mail and news about nut and 06da:0002 Phoenixtec but not found a solution. I have a very nice working ups from: CENER ref: "Active 1000VA 230V 12 CENER" and front logo "LA 900" It has COM3 and USB plugs, I don't know if it needs a standar RS232 I have test with varius drivers in ups.conf [MyUPS] driver = bcmxcp_usb | usbhid-ups |

Hi Charles. I have got this output with driver usbhid-ups ups.conf [Phoenixtec] driver = usbhid-ups vendorid = 06da productid = 0002 port = auto #~ langid_fix=0x0409 desc = "CENER ONLINE 1000VA" # export USB_DEBUG=5 # ./usbhid-ups -a Phoenixtec Network UPS Tools - Generic HID driver 0.37 (2.6.4) USB communication driver 0.32 0.000000 debug level is '3' 0.000557

http://www.zigor.com/uk/index.php/en/products/upssystems/danubioseries Ships with UPSilon 2000 software, and appears to work with blazer_usb to a certain extent with the following config: [danubio] driver = blazer_usb langid_fix = 0x409 port = stupidly, I seem to have to set this even though it's ignored vendorid=0001 productid=0000 Yes, vendor 0001,

Like Glen Ogilvie, I got a newer Dynamix 650 VA with USB connection, and was having trouble getting NUT to communicate with it. This appears to be the UPS that megatec_usb was built for - Vendor: 0x0001, Product: 0x0000, uses Megatec's software, has USB chip attached to internal serial lines, and has terrible USB implementation with fake HID tables. But megatec_usb would consistently fail.

Hi, I've got two Dynamix UPS's, both of which are USB and don't seem to work with NUT yet. Can anyone give me some advise on where I should start with working on getting them working. I can do a little C programming, so happy to give things a go but need some guidance. Brian R. Smith (who also subscribes to this list) has one as well. I've attached the output of lsusb -v and

Hello, I am trying to get a "no-brand" (LMS DATA, model no LMSP1200RI) UPS to work with NUT. I now realise I should have checked compatibility with NUT before purchase. My other UPS (APC) works perfectly..... Anyway, I have spent a good day trying to get this thing working. #lsusb Bus 001 Device 003: ID 0001:0000 Fry's ElectronicsDevice Descriptor: bLength 18

On Dec 3, 2014, at 2:02 PM, janc at telefonica.net wrote: > USB error: error sending control message: Invalid or incomplete > multibyte or wide character This is a wild guess, but what about using the option "langid_fix=0x0409"? -- Charles Lepple clepple at gmail

Hi Volker Kuhlmann and Richard Nelson, As both of you are interested in where I got up to with getting my Dynamix 1000 VA UPS working with Linux, here is the details. It works.. But not too well, as the driver still seems to need some work, and is not in the main nut source as far as I know. It also seems to sometimes not respond when it should. The manufacture has uses the same format as

Hi Arnaud and NUT team You may recall some time ago, I and a few others posted questions about the above referenced (cheap and cheerful) USB-based UPS - specifically regarding FreeBSD USB support in NUT. The original posting was entitled "Zigor Ebro 650 compatibility". I've since tried the latest Windows port of NUT with my WinXP laptop connected to the Zigor Ebro and finally

On 10/08/2012 21:58, nut-upsuser-request at lists.alioth.debian.org wrote: >>> Arnaud Quette<aquette.dev<at> gmail.com> writes: >>>> 2012/6/3 Chris Rees<crees<at> freebsd.org>: >>>>> Hi all, >>>> Hi Chris, >>>> >>>>> After some research I've found that this device should run with the

Hi, I'm using macports to install nut on a MAC OS X (10.7) I get the following error messages when I try running: sudo blazer_usb -a zigor -DDDDDDDDDD 0.944590 Checking device (0001/0000) (250/005) 2.785449 - VendorID: 0001 2.785465 - ProductID: 0000 2.785468 - Manufacturer: unknown 2.785472 - Product: STD UPS MON V1.0 2.785475 - Serial Number: unknown

Gidday all - I'm a new user to nut. I've got some cheap powerpal UPSs working fairly well. However I also have a new Dynamix UPS-1700D and an old Powercom KIN-1700 something unit that I cannot make work right. The best method I've found is "trial and error" which sounds a bit last-resort. Is there any better way to find out what protocol is used? -- Criggie

Hi to all! Path send by Brian R. Smith with subject "[Nut-upsdev] Dynamix 650 VA USB - broken, have rough fix" really works! Tested with no-name UPS (works with UPSilon 2000 Windows software) and has USB vendorid=0001 productid=0000 Please, add it to the main branch of blazer_usb.c I belive that several users agree this.