similar to: Support for languageID in blazer_usb

As per request by Arnaud in the users list Device manufacturer: Apollo Device name: 1085VC (Retailer's product page: http://shop.esquire.co.za/ProductDescription.aspx?id=583072) upsc on mains power: > $ upsc apollo > battery.voltage: 13.50 > battery.voltage.nominal: 12.0 > beeper.status: enabled > device.mfr: > device.model: > device.type: ups > driver.name:

Hi Team, I've been experimenting with getting the PowerShield Defender 1200VA UPS working and it appears to be supported by the blazer_usb driver, although it did not have the correct permissions within udev to load the driver as the non-root user after an RPM install on Fedora Core 16. [root at localhost ~]# lsusb ... Bus 006 Device 005: ID 0665:5161 Cypress Semiconductor USB to Serial

I have Tecnoware EcoStrip 1100VA UPS which unfortunately uses Upsilon 2000 software. Their Linux software does not work but Windows version does so I made pcap file of the usb traffic with Wireshark available at http://www.dumbot.net/problems/EcoSrip1100VA.pcap I've read many posts on problems with these devices and tried all variations available with the blazer_usb driver without any luck.

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi there! I don't know if you are able to help me. Have tried almost everything at this point.. I recently switched from a BlueWalker(Powerwalker?) PW UPS VI2000 LCD 2000VA offline UPS to a BlueWalker(Powerwalker?) PW UPS VFI 1500 LCD 1500VA Online UPS. Seems like the driver is accepting both, however, the shutdown command wont work. And this

http://www.zigor.com/uk/index.php/en/products/upssystems/danubioseries Ships with UPSilon 2000 software, and appears to work with blazer_usb to a certain extent with the following config: [danubio] driver = blazer_usb langid_fix = 0x409 port = stupidly, I seem to have to set this even though it's ignored vendorid=0001 productid=0000 Yes, vendor 0001,

On Dec 17, 2011, at 3:53 AM, Arnaud Quette wrote: > Author: aquette > Date: Sat Dec 17 08:53:41 2011 > New Revision: 3363 > URL: http://trac.networkupstools.org/projects/nut/changeset/3363 > > Log: > Try to fix language ID support for USB units from LDLC, Dynamix and no names in blazer_usb (reworked patch, from Brian R. Smith and Aur?lien Grenotton) ... > + if

Hello! I'm trying to use nut with a Ippon Smart Winner 3000 UPS (http://shop.key.ru/photo/items/45535.jpg) which looks like a custom-labeled OEM model of the megatec branch. I tried both the megatec_usb and the blazer_usb drivers for it, with a obvious config section: [ippon] driver = blazer_usb port = auto vendorid = 06da productid = 0003 desc = "Ippon Smart Winner 3000" If I

On 10/08/2012 21:58, nut-upsuser-request at lists.alioth.debian.org wrote: >>> Arnaud Quette<aquette.dev<at> gmail.com> writes: >>>> 2012/6/3 Chris Rees<crees<at> freebsd.org>: >>>>> Hi all, >>>> Hi Chris, >>>> >>>>> After some research I've found that this device should run with the

I am pleased to be able to report that reposurgeon's Subversion dump stream parser is now working well enough to produce a live git repo from the NUT history up to r3364. This didn't happen easily. The NUT repo is a wonderful test case, and by that I mean it was a stone bitch to get the stream parser to handle it. One class of problems was due to cv2svn, which did things with the

Hello, I have a Salicru UPS in a Debian Wheezy connected with a USB HUB: # lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub ... Bus 001 Device 003: ID 1a40:0201 Terminus Technology Inc. FE 2.1 7-port Hub Bus 001 Device 005: ID 0665:5161 Cypress Semiconductor USB to Serial The problem is that I have some failed messages: # dmesg ... [90941.136274] usb 1-3.7: usbfs:

On Nov 25, 2013, at 4:56 PM, Fabio Cecamore wrote: > Hi all, > after a change of UPS (to Atlantis Host Power 851) I began to use the new driver blazer_usb and compared to old one (blazer used with serial connection) I noted more CPU use and errors in dmesg: > > [...] > [256712.584370] usb 4-5: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110 "ret

Hello, I am trying to make my UPS system working with NUT but with no success. I got "No supported UPS detected" message. I use the blazer_usb driver since it was proposed to me by the web site. My NUT version is : 2.7.1 (installed from standard RPM), release 2.41 The UPS identification: INFOSEC X4 RM PLUS linux-2qya:~ # /usr/lib/ups/driver/blazer_usb -a infosec Network UPS Tools -

Hello I am using Freenas 11.3 (freebsd like) with a GREENCELL usb ups. with nut 2.7.4_13 pre installed But, this ups is not detected as "blazer_usb" on port "auto" neither "ugen0.4"! Network UPS Tools - UPS driver controller 2.7.4 Network UPS Tools - Megatec/Q1 protocol USB driver 0.12 (2.7.4) No supported devices found. detail below. Another info : This

Hi, another UPS piece supported by blazer_usb: ALLSAI model LV 2K upsc output: battery.voltage: 82.08 battery.voltage.nominal: 72.0 beeper.status: enabled device.mfr: device.model: LV 2K device.type: ups driver.name: blazer_usb driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.version: 2.4.3 driver.version.internal: 0.03 input.current.nominal: 18.0 input.frequency: 59.9

On Mar 7, 2014, at 4:12 PM, Josu Lazkano <josu.lazkano at gmail.com> wrote: > Are the messages a problem? Or could I ignore? Since they aren't happening on each poll interval, they are not a big problem. The driver should recognize -110 as a timeout, and retry the query.

2014-03-08 14:26 GMT+01:00 Charles Lepple <clepple at gmail.com>: > On Mar 7, 2014, at 4:12 PM, Josu Lazkano <josu.lazkano at gmail.com> wrote: > >> Are the messages a problem? Or could I ignore? > > Since they aren't happening on each poll interval, they are not a big problem. The driver should recognize -110 as a timeout, and retry the query. Thanks for the

On Apr 3, 2015, at 1:54 PM, Humberto M?ckel <hamberthm at gmail.com> wrote: > I've successfully configured UPSMON to monitor the UPS status, and do the shutdown procedure by calling the SHUTDOWNCMD on a simple bat file I've made. This bat file is as follows: > > cd C:\Program Files (x86)\NUT\bin > blazer_usb -a HAMUPS -k > pause > > So this should send the

(please use reply-all - this list does not alter reply-to headers) On Sep 10, 2015, at 6:23 AM, Thomas Aichinger <taich at qpl.at> wrote: > > Hi, > > I am using a ALLNET 91500 UPS with blazer_usb driver > > /usr/lib/ups/driver/blazer_usb -a ups91500 -L > Network UPS Tools - Megatec/Q1 protocol USB driver 0.10 (2.7.1) [...] > I set delay.shutdown to 600 sec but UPS

Hi all, after a change of UPS (to Atlantis Host Power 851) I began to use the new driver blazer_usb and compared to old one (blazer used with serial connection) I noted more CPU use and errors in dmesg: [...] [256712.584370] usb 4-5: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110 [256789.640795] usb 4-5: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8

Device web page http://www.samurai-power.com/samurai-smart-1000-lcd UPS is marked as Micropower LCD 1000, but in Slovenia is remarked as Samurai LCD 1000 [ups] driver = blazer_usb port = auto vendorid = 0001 productid = 0000 upsc ups Init SSL without certificate database battery.charge: 100 battery.voltage: 27.40 battery.voltage.high: 26.00 battery.voltage.low: 20.80 battery.voltage.nominal: