Displaying 20 results from an estimated 2000 matches similar to: "Access Denied"
2013 Aug 20
1
username and password can't be verified
Good day Folks,
I am trying to setup a mail server based on dovecot(with imap and pop3)
and postfix as a smtp on debian jessie/sid.
The login its system user.
After I have tried to configure the client (Icedove), this last can find
the imap, pop3 and smtp servers; but the can't be verified.
Please see below my dovecot, postfix configurations and log details.
erickom at ajk:/etc/postfix$
2004 Jan 15
2
HTB
Hi, I have the following questions:
I only have one htb computer (2 nics) to shape the international traffic
as well as the metropolitan traffic (i have a list of metropolitan ip''s to
use). Can this be achived using iptables with packet marking (on that htb
computer the 2 nics are bridged)?
If it can will there be delays introduced by the shaping operation (the
metropolitan link is a
2005 Oct 23
1
Script for metropolitan
The script is corect ?
#!/bin/bash
/sbin/iptables -F -t mangle
/sbin/iptables -X
/sbin/iptables -t mangle -N mark_horiz_src
/sbin/iptables -t mangle -N mark_horiz_dst
/sbin/iptables -t mangle -A PREROUTING -i eth0 -j mark_horiz_src
/sbin/iptables -t mangle -A PREROUTING -i eth1 -j mark_horiz_dst
/sbin/iptables -t mangle -A OUTPUT -o eth0 -j mark_horiz_dst
/usr/local/bin/mipclasses -s
2005 Nov 15
3
can I use tos and fwmark at the same time?
Hello lartc maintainers and users!
I have a router with two NICs. One NIC is connected to the Internet and the other to my internal LAN. I made a script for priorizing interactive traffic. The script matches TOS Minimize-Delay for priorizing interactive trafic, and fwmark for metropolitan packets.
I have two root classes (simulating two circuits) : 1:1 for internet and 1:3 for metropolitan.
2003 Jul 21
5
how to test whether two slopes are sign. different?
Not really r-specific:
Z = (b1 - b2) / SQRT ( SEb1^2 + SEb2^2)
-------Original Message-------
From: Gijsbert Stoet <stoet at volition.wustl.edu>
Sent: 07/20/03 09:51 PM
To: r-help at stat.math.ethz.ch
Subject: [R] how to test whether two slopes are sign. different?
>
> Hi,
suppose I do want to test whether the slopes (e.g. determined with
lsfit) of two different population are
2003 Jul 31
0
IPIP tunnels and TCP connections
I was trying the following setup with IPIP tunnels, one that used to
work through another ISP, but no longer...
Internal network
|
Linux box 1 (kernel 2.2.24) iif=10.0.0.1, extf=a.b.c.d,
tunf=172.16.0.1
|
|local metropolitan network
|
Another Linux box 2 (kernel 2.2.17, or 2.4.19, same result)
iif=irrelevant, extf=x.y.z.v,
2009 Dec 16
1
regularised incomplete beta function
Dear:
I am trying to work out the regularised incomplete beta function in R. I searched google
on this and found UCS library. But I can not find this in R packages. Does anyone have use
this before or how to insert UCS in R?
Many Thanks!
Xin
Xin
-------
Dr.Xin Shi
Senior Lecturer in Statistics
Manchester Metropolitan University Business School
Aytoun Building
Aytoun Street
Manchester
M1
2005 Mar 28
2
AGI STREAM FILE command
Has anyone had success with the AGI STREAM FILE command with the CVS? I
can't get it to work with the debian 1.0.5 package or the CVS on Redhat
or Debian.
It's not syntax, I'm doing that right. It doesn't give me an error when
I use AGI DEBUG, it doesn't even give a response, just goes right on to
the next command. I put a "SAY NUMBER 123 #" before and after
2005 Jun 29
1
Romania metropolitan
OOPS <blush>
http://vcalinus.gemenii.ro/quaggarealms.html
is what should have been posted by me...
This deals with the metropolitan / other issues, I think. I can''t read
it...
--
gypsy
2011 Oct 26
4
openldap missing modules
Hi List,
I'm currently setting up an openldap server and included the following
lines in my slapd.conf :
modulepath /usr/lib/ldap
moduleload back_hdb
after finishing up my config and i run slaptest on it i get an error
saying that the modulepath doesn't exist.
I checked and it indeed isn't there , in fact i can find it anywhere on my
system (centos 5.7).
the packages i've
2010 May 28
2
permanently add md device
Hi All
Currently i'm setting up a 5.4 server and try to create a 3rd raid device, when i run:
$mdadm --create /dev/md2 -v --raid-devices=15 --chunk=32 --level=raid6 /dev/sdc /dev/sdd /dev/sde /dev/sdf /dev/sdg /dev/sdh /dev/sdi /dev/sdj /dev/sdk /dev/sdl /dev/sdm /dev/sdn /dev/sdo /dev/sdp /dev/sdq
the device file "md2" is created and the raid is being configured. but somehow
2007 Apr 13
0
NYC Area R / S / S-Plus Users Group Forming, Thursday, April 26th
Hi gang.
So I'm actually carrying through on the threat I made a couple of months
back, and helping to start a local users group for the NYC Metropolitan
area. Here's a copy of the announcement of our introductory / planning
meeting, I also can send a flyer version of this to anyone who wants (Open
Office document, should be viewable in MS-Office). Please feel free to
attend,
2007 Mar 13
0
[LLVMdev] Writing a backend basic information
Hello,
Ive started writing a backend to a simple 32bit RISC processor core with
the goal of undertaking some flexible instruction processor core research
on FPGAs and also to use it for teaching computer architecture.
I have a requirement to generate instructions like below, where the (17bit)
immediate value is (preferably) omitted if it has a zero value.
add %15, %14
add %12, %23 - 18
mov
2007 Jun 15
1
[LLVMdev] Node definitions, Pseudo ops and lowering SELECT/COND_BRANCH to branch instructions
Howdy,
<---stuff deleted ----->
Basically the architecture I want to compile to (SABRE) RISC does
not support a conditional branch or a select instruction. It supports
explicit branches of the form.
blt %a, %b, imm // branch on less than iff %a < %b then pc = pc + imm
So there are various branch instructions like .... ble, beq, bne,
blt, bltu and bleu (unsigned)
Im just
2004 Jan 23
0
SAMBA and active directories
Good Morning
We are planning a Windows 2003 migration project through out our company and
we are currently using SAMBA on the following platforms. to communicate with
our NT servers,
MPE/ix 6.5 pp2 and 7.0
HP-UX 11i
Linux RedHat 9
Can you please advise which SAMBA version should we install for each of the
above O/S's and where we may download these from?
Many Thanks
David Jason
Senior
2007 Jun 14
1
[LLVMdev] Node definitions, Pseudo ops and lowering SELECT/COND_BRANCH to branch instructions
Hello,
Im back trying to finish my backend to a simple RISC cpu SABRE now
that most of the tedious process of examining undergraduate students
is out of the way. I have managed to describe the registers and the
instructions in the architecture and have added support for 32 bit
immediates (thanks to Christopher Lamb) as the instruction set only
supports 17 bit immediates directly.
Could
2005 Mar 27
3
How to park/transfer a call received from a Queue?
Hi!
I'm trying to transfer a incomming call from a Queue to another extension.
I'm receiving a call from a queue with the AgentCallbackLogin.
The queu is as following:
Queue(sales|t)
Which should allow transfers.
So as soon as the call is answered I would like to be able to transfer it
When the agent presses the # I get the dialtone but as soon as I press any
digit Asterisk tells me
2012 Mar 07
2
hfs with extended attribute support
Hi all,
I?ve got a HFS+(not journaled) volume connected to my centos6.2 test
server, i installed the kmod-hfs(plus) packages and read/write works all
fine.
but since i?m going to use this for serving mac home folders via
netatalk i would like to mount it with support for Extended Attributes
and acl?s.
so i add user_xattr and acl to my fstab options but then it fails to mount.
checking the
2011 May 16
1
bond empty after reboot
Hi all,
I've setup a ethernet bond on my centos 5.6 server , when i do a reboot
the bond does come up but cleared all the slaves
and i've to manually re-add them with ifenslave.
does anyone know a solution to this? am i missing something? offcourse i
can add it to my rc.local but there must be a more elegant way. please
see my configs below
Thanks,
Wessel
ifcfg-bond0:
DEVICE=bond0
2005 Oct 01
0
Re: RE: Control Traffic
Hi Andreas!
I mainly understand what you mean, I tried to fix something on the script, I don''t know if I did it well.
Can you take another look on it please and if is wrong to make the corrections directly on it so that I see where the mistake is...
With this script I want to make limits for IP class 85.120.48.0/25 for international traffic in 256 KBps classes and for metropolitan