similar to: Smbd hangs for users...

Hi, I'm trying to setup some servers with Samba and Winbind. One of the servers are both a Samba server and a NFS server so I want to have the same ID:s on the files that I export with NFS. All users are all in one AD domain. The problem is that the Samba/NFS server are running SLES 10 and the others are running FreeBSD 6.2 and they get different UID:s and GID:s. All the FreeBSD servers are

Hello again guys, Iam trying to asses the best hardware for a machine that procceses a high number of packets per second on its NIC. THe only way I can achieve this without guesses is If iam able to understand or test what the number of interrupts available per core and how to translate that to PPS capabilities. So far ive been testing an Core I5 CPU and was able to achieve up to 400k

I just installed 1.9.2 on my 2nd machine, but after I installed I checked the version with ruby -v and it sent me 1.8.7 Here''s the terminal output...anyone know what''s wrong (I have RVM installed): Francescas-MacBook-Air:~ fkrihely$ rvm install 1.9.2 Fetching yaml-0.1.4.tar.gz to /Users/fkrihely/.rvm/archives Extracting yaml-0.1.4.tar.gz to /Users/fkrihely/.rvm/src Configuring

Hello I saw that samba 2.2.5a is out. Whats the difference with 2.2.4? Is there currently any problem with 2.2.4 or 2.2.5a? I want to uppgrade my server from 2.2.3a so i want to know if there are any thing that i should be prepared for. Ive heard that 2.2.4 had some printing problems? Is this true? /Alexander

Hi, I am trying to plot the Case-Shiller index found at: http://www2.standardandpoors.com/spf/pdf/index/CSHomePrice_History_022445.xls The way I'm importing it into R is as follows: library(gdata) W <- read.xls("http://www2.standardandpoors.com/spf/pdf/index/CSHomePrice_History_022445.xls ", header=TRUE) attach(W) To give you and idea of what the data looks like: >

After booting into Linux 2.6.18-8.1.3.el5xen #> hdparm -tT /dev/sda /dev/sda: Timing cached reads: 10512 MB in 1.98 seconds = 5306.82 MB/sec Timing buffered disk reads: 210 MB in 3.02 seconds = 69.58 MB/sec Then I start a domu with the command: #>xm create <domainname> This domain uses file based Virtual block devices. And now the hard drive performance goes down

Hi! We have a production cluster AIX 5.1 (HACMP) with Samba (2.99 alpha) as auth today, it handles aroud 800-900 users, we have no local users on the box except the one that must be there... But now we need to uppgrade. Now im testing the 3.0.4 I have manged to get samba to work in a native mode AD. with one domain the problem is when i try to use the production domain, thats runs in mixed mode

Hi, i am the new one;) - and my first post is about a problem i ran into. I installed a mailserver on a RaspberryPi. It works mostly well, using dovecot 2.1.7. (exim4 4.8 (not in use, smtp direct to Provider), fetchmail 6.3.21, RasPi 3.12.28+, Roundcube (no version known) - the whole system went through an apg-get update/uppgrade this night to look if a known problem already been fixed. When

Hi! I?m having trubbles with the speed on my samba server, I just uppgraded to gigabit (Realtek 8169 NIC) at home when i copy stuff from the samba server i get around 5-6Mb/sec and if i use ftp to access the same file on the same server i get almost 30Mb/sec does anyone have a clue what causes this problem? When i used my old 3com 905c for the local net i got normal 100Mbit speed (around

Hi, I'am running a small samba server at work with 10+ users in the domain (all of them added with W2KSP1 and 2.2.3 or 2.2.4). I uppgraded to 2.2.5 a while back and has not experienced any problem with it, but when I try to add a newly installed W2KSP1 client to the domain I get the following entries in the log file: Sep 10 13:29:55 linus smbd[17681]: [2002/09/10 13:29:55, 0]

The Virus controllers wouldn't let me send the attachment... ----- Original Message ----- From: "Trevor Fraser" <trevor@systematic.co.za> To: "Tommy Eriksson" <tommy.eriksson@ctakt.com> Cc: <samba@lists.samba.org> Sent: Tuesday, September 10, 2002 6:32 PM Subject: Re: [Samba] Problem joing a W2KSP1 client to a Samba PDC (2.2.5). > Hi Tommy. > >

Hello :) The attached patch (which is not in any way finished) optimizes the resampler. (For those following the discussions on IRC; this version includes optimizations for both direct and interpolate cases). Using GCC 4.3, x86_64, Valgrind to measure instruction counts, resampling 10 frames of 320 floats at quality 3. Direct was measured with a 16=>48 resampling, and interpolate with a

Hi, I have not yet found any solution to my troubles so I though maybe someone here could give me some help. We have a Linux server with a Scsi Raid 5 disk. We use it as Samba and Nfs server for Windows and Linux clients. It also exports through Samba a disk mounted through Nfs from another Linux server. Everything was working fine until we uppgraded the server to RedHat 7.2. Now, after e few

I have a desktop unit with a sempron 2500+ to play with. doing "more /proc/cpuinfo" indicates cpu Mhz as1044 not the 2500 I am familiar with cpuspeed. doing ps ax | grep cpuspeed resulting in nothing. I did service cpuspeed start. No errors reported. ps ax | grep cpuspeed resulted in nothing. I was going to do "killall -SIGUSR1 cpuspeed" to attempt to get 2500+ cpu speed. I

Im trying to run this program called Thinkboxx and wen it tryes to comunicate over the comm port it hangs. Here are som output to read. earlier on i get: Call kernel32.VirtualAlloc(43050000,00001000,00001000,00000004) ret=0058557c Ret kernel32.VirtualAlloc() retval=43050000 ret=0058557c thats from vhere the com port gets an virtual memory space, i think. and in the end i have: Call

NAME rq v2.3.2 SYNOPSIS rq (queue | export RQ_Q=q) mode [mode_args]* [options]* URIS http://raa.ruby-lang.org/project/rq/ http://www.linuxjournal.com/article/7922 DESCRIPTION ruby queue (rq) is a zero-admin zero-configuration tool used to create instant linux clusters. rq requires only a central nfs filesystem in order to manage a simple sqlite database as a distributed

HISTORY --- 2.3.3: - fixed bug in updater related to io files (see tmp_stdin in jobqueue.rb) - [IMPORTANT] removed feature where stdin jobs could contain comments (''#''). input lines are now taken literally __except__ blank lines, which are still ignored. - added ability to dump stdin/stdout/stderr for any job rq q stdout 42