similar to: Netbios Aliases and %L and port 445

Hi all I've a samba server listen on eth0 (everything ok) and eth2 server1 has eth2: 192.168.100.212 <--> 192.168.100.213 (another linux server) with another interface 192.168.30.0/24 from network 192.168.30.0/24 I can ping 192.168.100.212 and works with samba shares (but only using numeric IP) I don't see any computers from windows machines. nbtstat doesn't find any host

On Wed, 3 Aug 2016 18:41:53 +0200 "Pol Hallen" <samb at fuckaround.org> wrote: > Hi all > > I've a samba server listen on eth0 (everything ok) and eth2 > > server1 has eth2: 192.168.100.212 <--> 192.168.100.213 (another linux > server) with another interface 192.168.30.0/24 > > from network 192.168.30.0/24 I can ping 192.168.100.212 and works

i am in desperate need for some help, i am having problems with students logging in at this school, continually trying / rebooting usually sorts the problem. also doing a nbtstat -R and will also allow students to logon most of the time. i have noticed that nbtstat -c shows are domain as on 81.4 when in reality it is on 81.1 , we had a problem with a share that when accessing would also be

I have been attempting to run the various permutations of Samba 3.0.x on my site now for a couple of weeks, and I can find no way to get it working properly. Either no one else is testing it, or there is something wrong with some manner of settings on my machines -- and they are of multiple classes adn different installs. I have one G70, one D380, and one 9000 N-class, and all of them exhibit this

Hello list, The issue is as the topic says, following are details: the Samba server running as ADS member, NBT enabled on Windows machines, no WINS. Windows machines can find each other by 'nbtstat -a' but cannot find the Samba server. The Samba server can't find neither Windows machines nor itself by 'nmblookup -a <netbios-name>', error message is "could not open

Hello I'm having a hard time finding information about NetBIOS. Maybe someone here has good experience with this API, so I figured I could try asking here, although the question is specifically on how to use NetBIOS in an all-Windows LAN from Visual Basic :-/ I'm trying to register a new name on a server so that clients can locate it by broadcasting its NetBIOS name. At this point,

Hi Everybody, We are working on samba 3.0.2a with sun kerberos SEAM and Netscape iDirectory Server support. We are able to integrate samba with ldap support. we tried integrater kerberos for authentication. We found a solution using pam via pam_krb5 module provided by the sun solaris 8. One important fact we found out using samba pam authentication, it directly calls for an account

Hello, Is there *any* way to reliablily determine the NetBIOS name of a computer when you only know their IP address? I know it is very easy to find the IP address from the NetBIOS name, but I can't seem to find any way of getting a NetBIOS name from an IP.. James deBoer (jdeboer@scsinternet.com)

Hi there. This is with regards to samba-3.0.23c, on FreeBSD 6.0-RELEASE-p12 Previously I had Samba up and running without any problems. Then I decided to do a tiny upgrade by simply switching to a new motherboard, while keeping all other hardware and software aspects the same. However, after the upgrade, netbios name resolution seems to have stopped working somehow. \\servername lookups no

Note: LMB = Local Master Browser DMB = Domain Master Browser Have Samba 2.2.7A running embedded in a variant of ucLinux. My interest was only to use Samba as a WINS server. I've set up the SMB.CONF with this config. for one test: wins support = yes local master = no domain master = yes preferred master = no os level = 0 I've set up the SMB.CONF with this config. for the other

Greetings, I am running samba 2.2.5 win RedHat 8.0 Linux machine Windows 2000 machine has fixed IP 192.168.0.40 Windows XP machine has fixed IP 192.168.0.30 Linux machine has fixed IP 192.168.0.1 on eth0 (local network NIC) and dynamic IP on eth1 (NIC connected to ADSL modem). I can ping 192.168.0.1 ( linux machine) from all machines I can ping 192.168.0.40 ( windows 2000 machine) from all

Hi all, All Win98 & Win2k used to be able to connect, but as of last week only one Win2k is able to access the share folder, but not without a little issue. Another Win2k in the same subnet have intermittent connection issue and Win98 is not able to access the folder. Setup: Samba 2.2.2 install into Solaris8 in a subnet with two other Win2k server. This subnet is connect to a number of

Hi, I'm running samba 2.0.5a under Solaris 2.7 and am seeing a problem where the netbios alias for our print server sometimes becomes unavailable. It is still visible in Network Neighbourhood, but double-clicking comes back with "<blah> could not be found on the network". However, I can connect to the machine OK, by double-clicking on its real name, rather than its alias. I

Hi! I have the problem that a host can not with the 'netbios name' and the 'alias' in a domain. Under samba 2.x it can be done without any problem. My samba version is: 3.2.7 Netbios name: u10 Netbios aliases: u2 Host has only one IP. Security is 'domain'. When I type: # net rpc join MEMBER -U Administrator -n u10 I can join the domain. Access to u10 is successful.

I didn't get any responses, can anyone at least tell me if this should or should not work? Samba 3.0.2a, two servers, each with a netbios name that matches their hostname. The idea was to have two servers live all the time, with the same printer drivers installed, and we could have the clients hitting one or the other via a netbios alias. I set up the netbios alias in smb.conf and dns

Hi ! Is There how I use an alias for a Samba Server ? I tried with dns alias and don't work ! i.e. Name' Samba Server is PARATY, and I'd like that the workstations could communicate with this Samba Server, but using the name SambaPDC. Is it possible ? Thanks, Bruno Stella brunostella@trt15.gov.br Setor de Redes - Secretaria de Informatica Tribunal Regional do

Samba 3.0.2a, two servers, each with a netbios name that matches their hostname. The idea was to have two servers live all the time, with the same printer drivers installed, and we could have the clients hitting one or the other via a netbios alias. I set up the netbios alias in smb.conf and dns cname, and at first things appeared to work. If a client installed a printer using the netbios

Greetings list, I've looked high and low, and cannot find an instance of this particular situation, and thought I might try leveraging the power of the collective hive mind of the user community to solve this problem. My setup is likely not at all common. I've created a bunch of netbios aliases on a single linux box. Each alias has the same name as a particular windows group, like hr

hi all I have a samba server acting as a domain member server providing file/print services to our SME As i want to provide users with a list of available printers for installation, i need to give them a win32 shortcut to "\\samba-server\" so they can see the available printers and install as required BUT... doing so will also show them all of the available shares... not a major

I encountered strange behaviour of "msdfs" when using together with "netbios aliases". E.g I have in smb.conf: [global] netbios name = server netbios aliases = server-oldname .... host msdfs = Yes [share1] path = /var/samba/share1 [share2] msdfs root = Yes msdfs proxy = \penguin\share2 .... From a windows (XP) machine I can now see: \\server\share1 and