similar to: samba-3.0.7-1_rh9 - where do I get swat to go with the new release

Hi, Li, Thanks for reply. It is strange that I used RBGL_1.6.0 successfully on the same linux system with R 2.3.1 before! After trying to install R 2.5.1, the RBGL_1.12.0 failed to be installed. Then, I uninstalled R. Delete the directory R/lib/. Installed R.2.3.1 again. And run getBioC1.8.5 for R 2.3.1 to download the three packages graph_1.10.6, RBGL_1.12.0 and Ruuid_1.10.0. But still

Hello, I have recently installed RedHat9 on my local server. It is meant to be a HTTP production server for my company. In RH9, SWAT doesn't come as standard. I therefore tried to install the RPM package found on the red hat nerwork : - samba-swat-2.2.7a-7.9.0.rpm and samba-swat-2.2.7a-8.9.0.rpm I would like to report that both failed at installation. A dialog box opened saying : reading

Btw if it burped on libxslt, you probably want to make sure you have libxml as well Just follow the same routine you did with libxslt wget ftp://rpmfind.net/linux/redhat/9/en/os/i386/RedHat/RPMS/libxml-1.8.17-8.i386.rpm wget ftp://rpmfind.net/linux/redhat/9/en/os/i386/SRPMS/libxml-1.8.17-8.src.rpm <p><p><p><p><p>Dave St John Mediacast1 Administration ----- Original

Hi Dave, I'll definitely compile it on RedHat9 instead of Windows... I am currently re-installing RH. I'll post all errors (if I get some) in my next message. Thanks again, MAX -----Original Message----- From: owner-icecast-dev@xiph.org [mailto:owner-icecast-dev@xiph.org] On Behalf Of Dave St John Sent: Sunday, December 07, 2003 12:03 AM To: icecast-dev@xiph.org Subject: Re:

Hi all, Having a very specific problem here: I have a working RedHat9 server running Samba 2.2.7 (the release that comes with RH9), acting as a PDC/File Server to around 15 WinXP Pro client workstations. This all works nicely, apart from our accounting package, Sage Line 50, which depends on its data being stored on a network share. Previously, when the data was stored on a WinNT4 share,

Hi Dave, I am now trying to compile Icecast2 under RedHat9. I get some errors when I try to ./configure so the make file is not created. Can you take a look at the attached file and tell me what is wrong? I tried to compile it on another RedHat9 computer but I got the same results... I think I will dedicate one computer ONLY to icecast2. In this case, could you advise me the best Linux

Hi, I think that is a oplock problem. disable oplock in your share. ----------------------------------- St?phane PURNELLE stephane.purnelle@corman.be Service Informatique Corman S.A. Tel : 00 32 087/342467

Its easier to compile it on linux than windows, you need MS Visual studio 6 for windows then you need to get all the associated libraries for windows, yet even more work. Icecast2 specific you need the following libcurl > http://curl.haxx.se/libcurl/ download > http://curl.haxx.se/download/curl-7.10.8.tar.gz libxml,libxlst > take a look over at rpmfind.net for the latest rh9 specific, be

You say that there are rpm-packages for rc2 available for redhat9. But when i browse the ftp directory, i saw that it is empty. How come? -- COMPUTERBILD 15/03: Premium-e-mail-Dienste im Test -------------------------------------------------- 1. GMX TopMail - Platz 1 und Testsieger! 2. GMX ProMail - Platz 2 und Preis-Qualit?tssieger! 3. Arcor - 4. web.de - 5. T-Online - 6. freenet.de - 7.

Hi all- Over the past week or two, I've been trying out asterisk under Fedora 1 Linux (RedHat). In my setup (single and dual Xeon motherboards), I have so far had a very good experience in terms of performance. In doing E1 load testing, I've found that Fedora handles heavy load much better than RedHat9, probably because of its better use of the multi-threading capabilities of the Xeon.

Hello All, About 2 weeks ago I upgraded from debian woody to sarge. This included an upgrade from Samba2.2 -> Samba3.0. However since the upgrade I have problems using my Samba server from my XP (home) Laptop. The symptoms are basically "explorer" freezeing on most network browseing type actions. Or if I open a file (eg a movie). I'm pretty confident that I don't have a

Sorry if this is a dup. I sent right before I subscribed to the list, so I'm not sure if it made it. I have just taken over a redhat system with Samba 3.0.0 configured with security = user, and domain logins enabled. I've included the smb.conf at the end of this message. I would like to upgrade to 3.0.10 for a numbers of reasons, one being security and one being that password changes

I have just taken over a redhat system with Samba 3.0.0 configured with security = user, and domain logins enabled. I've included the smb.conf at the end of this message. I would like to upgrade to 3.0.10 for a numbers of reasons, one being security and one being that password changes don't work from workstation machines because of the Windows KB828741 patch. What I want to know, is if I

Am 16.05.2016 um 01:05 schrieb jacek burghardt: > Iscsi cant be encrypted. what has this to do with samba and who has iSCSI (SAN) on the normal network instead a seperated storage network or in case of a small VMware cluster with 2 hosts even not just 2 network cables from each to the SAN-storage with no switch at all? > On Sun, May 15, 2016 at 3:30 PM, peter lawrie < >

If you just want to share some files, version 2 will fit your needs..... So skip the part installing samba and continue with setting it up from the howto..... Mit freundlichem Gru?, Dirk Laurenz Systems Engineer Fujitsu Siemens Computers Sales Central Europe Deutschland Professional Service Organisation Nord / Ost Hildesheimer Strasse 25 30880 Laatzen Germany Telephone: +49

I've installed icecast2 and ices (from CVS 3 days ago) on a Redhat9 box (Celeron 2Ghz, 256Mb ram, SoundBlaster Live 5.1 sound card). I'm streaming live from soundcard at 44.100 with a 128kbit stream and 2 channels. The problem is that with 2 channel, there is a small delay between the channels; if I use only 1 channel, all is ok, but I need stereo signal with optimal quality. The cpu

Iscsi cant be encrypted. Join my framily E02705708hn 3032 last name BURGHARDT state is co Cheapest sprint service only 25 a month. On Sun, May 15, 2016 at 3:30 PM, peter lawrie < peter.lawrie at glendiscovery.co.uk> wrote: > I had to deal with ransomware at the end of April. One of the PCs on my > customer's network was infected by opening a realistic looking email >

Well iscsi makes safe backup target. The way to protect yourself is to have backup of samba shares to iscsi. Join my framily E02705708hn 3032 last name BURGHARDT state is co Cheapest sprint service only 25 a month. On Sun, May 15, 2016 at 6:34 PM, Reindl Harald <h.reindl at thelounge.net> wrote: > > > Am 16.05.2016 um 01:05 schrieb jacek burghardt: > >> Iscsi cant be

On Fri, 9 Mar 2018 15:46:23 +0000 peter lawrie <peter.lawrie at glendiscovery.co.uk> wrote: > Dear Rowland > Thank you for the reply. > I thought I had probably created an insecurity - but no worse than > before! The previous samba was version 3.6.23-13.el5_11 on Centos > 5.11 > > I installed windows 10 PCs for them last year, replacing their XP > machines and

On Fri, 9 Mar 2018 16:55:24 +0000 peter lawrie <peter.lawrie at glendiscovery.co.uk> wrote: > here is the current smb.conf I would start with this smb.conf: [global] workgroup = dpcl security = user netbios name = dpcl1 server string = %h max server protocol = smb2 cups options = raw printing = cups hosts allow = 127.