similar to: video capture via nvidia g3, cento5 (rhel5) - arrrgghhh

Hi, I'm new to R. I was wondering if anyone has an OS X native installation (not Carbon) of R on a G3 Macintosh that is able to run linear regression? I installed Jan de Leeuw's R binary for OS 10.2 Jaguar on my laptop, which is still a G3 model. When I try to run a simple regression, using lm, I get an "Illegal Instruction" message and R quits. Jan thinks it may be the case

Hi there, my HP R1500 G3 UPS doesn't apply my battery.charge.low value i set via upsrw. Is this a common problem with this model in nut 2.6.4? Any ideas how to force the UPS to accept this value? Regards Jan % upsc hp1500 battery.charge: 100 battery.charge.low: 20 battery.charge.warning: 20 battery.runtime: 23917 battery.temperature: 49.0 battery.type: PbAc battery.voltage: 39.0

Hello * this morning I tried to upgrade from pxelinux 3.11 to 3.84 and discovered that the localboot stuff does not work on HP DL360 G3 and G5. The latest syslinux Version I found with a working localboot is 3.36. pxelinux.cfg/default: default harddisk prompt 1 label harddisk localboot 0 implicit 0 timeout 250 This so simple, it should just work, shouldn't it? The

Hello- Does anyone one this list maintain the official CentOS 6 + 7 AMIs in AWS? If so, could you please enable those images for use with the new g3.* instance types? If this list is the wrong place for this request, please point me in the right direction. Thanks! -Stephan

On Aug 7, 2013, at 7:40 AM, Jan Phillip Greimann wrote: > I tried to set up nut with our new arrived HP R1500 G3 UPS but there is a failure with the usb connection. After trying "/lib/nut/usbhid-ups -DD -a hp1500" the log says there are "libusb_get_interrupt: Connecion timed out". If you start upsd, what does "upsc hp1500" return? There are two ways to fetch

Some additional info... AFAIK, the AMIs I'm referring to are owned/maintained by the CentOS team, not by AWS. Details and suggestions to contact this list for assistance are published at both https://wiki.centos.org/Cloud/AWS and https://wiki.centos.org/Cloud/AWS Basically, the maintainer of the Centos.org AWS account just needs to add/approve the current AMIs for the g3.* instance

Good afternoon everyone, I''m trying to compile the xen 2.6.32.x pv_ops kernel on centos 5.5 with i386 quad core xeon system (HP DL380 G3). Having some issues during the kernel compile one of which related to intel agp so I just removed it from .config and didn''t come across it again. This error here has got me stumped though: drivers/built-in.o: In function

I have been trying to install CentOS 4.3 on an HP DL360 G3 (with dual Xeon 3.2 GHz, a Smart Array 5i, and two 36 GB disks doing RAID 1 mirroring). I''m doing all defaults (including the disk and LVM setup) and using the "Minimal" checkbox at the bottom of the Custom machine type package selection screen, so it''s a very "vanilla" install. It zips through the

Hi. I am trying to boot Xen 2.0.5 on an HP DL380 G3. It won''t. The box has an "HP Smart Array 5i" that when running normal Linux is handled by the CCISS driver. I suspect that this is what is not supported in the stock Xen kernel. Am I correct that I need to build a kernel from source ? According to http://lists.xensource.com/archives/html/xen-devel/2004-11/msg00709.html there

I've recently installed the latest Debian Linux for powerpc onto and old iMac (version A) the original iMac with a 233Mhz G3 processor and 160MB of sdram. The debian install went smooth and so the the apt-get install of Asterisk 1.4.21 It appears to have no functioning zaptel or ztdummy module. Is because of hardware? or is it because whoever built the package didn't include a full

On 07/08/2013, at 13.40, Jan Phillip Greimann <jg at softjury.de> wrote: > Hi there, > > OS: (L)ubuntu 12.04 precise LTS > Nut: 2.6.3-1ubuntu1.1 > Installation Method: Package (apt-get install nut) > Hardware: HP R1500 G3 INT FYI: I have a different UPS, a HP R3000 XR and I monitor it using serial and the bcmxcp driver. [R3000XR] port = /dev/ttyUSB0 driver =

I have an HP T1000 G3 for looking after three desktop PCs, a switch and a router. The batteries seem to be fine (battery tests, charge levels), but when I'm testing a power-failure, the UPS starts the FSD much too soon (judging by the battery charge level monitored with upsc). The load is about 300W, less than half nominal load, so despite the batteries not being brand new, it ought to keep

I am running a HP DL360 G3 ans want to know the optimal g729 module for it. There don't seem to be any optimised for Xeon's. I am currently using i686, but is there a better one to match my Xeon CPU's? [root@pbx ~]# cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 2 model name : Intel(R) Xeon(TM) CPU 2.80GHz stepping

The machine in question is a DL360 G3 R03 Xeon DP 3060-512/533 (part number: 322471-421). It's the first HP-branded model we've had so far (previously all Compaq branded). It has 1Gb of memory and a couple of drives on the on-board SCSI controller (setup for mirroring in the SCSI bios). No SMP is setup right now (doesn't get far enough to do anything with it!). In any case, this

I want to install CentOS 5.1 with hardware RAID on an HP DL140 G3 server that I have here for testing. It prompts me for a storage controller. According to this readme page for the latest driver at ftp://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1463703615/v44436/mpt linux-4.00.13.01-2.rhel5.i686.dd.gz.txt CentOS 5 should already contain a "default driver version contained in the Red

On 08/08/2013, at 18.58, Alf H?gemark <alf at i100.no> wrote: > On 08/07/2013 02:02 PM, Bendtsen, Jon wrote: >> On 07/08/2013, at 13.40, Jan Phillip Greimann <jg at softjury.de> wrote: >> >>> Hi there, >>> >>> OS: (L)ubuntu 12.04 precise LTS >>> Nut: 2.6.3-1ubuntu1.1 >>> Installation Method: Package (apt-get install nut)

Hi, The HP ZBook 15 G3 laptop builtin display (eDP-1) does not work correctly with v4.11-11413-g2868b25. When booting the laptop, the resolution seems to be limited to 1024x768, and gnome-session segfaults. Up to 4.11 the display works just fine in 1920x1080 mode. I'm seeing this in the kernel logs: nouveau 0000:01:00.0: eDP-1: EDID is invalid: [00] BAD 00 ff ff ff ff ff ff 00 ff

Hi there, OS: (L)ubuntu 12.04 precise LTS Nut: 2.6.3-1ubuntu1.1 Installation Method: Package (apt-get install nut) Hardware: HP R1500 G3 INT Hardware-Specs: http://h18004.www1.hp.com/products/quickspecs/14059_div/14059_div.pdf Problem: I tried to set up nut with our new arrived HP R1500 G3 UPS but there is a failure with the usb connection. After trying "/lib/nut/usbhid-ups -DD -a

On 08/07/2013 02:02 PM, Bendtsen, Jon wrote: > On 07/08/2013, at 13.40, Jan Phillip Greimann <jg at softjury.de> wrote: > >> Hi there, >> >> OS: (L)ubuntu 12.04 precise LTS >> Nut: 2.6.3-1ubuntu1.1 >> Installation Method: Package (apt-get install nut) >> Hardware: HP R1500 G3 INT > > FYI: > I have a different UPS, a HP R3000 XR and I monitor

On 05/15/2017 01:10 AM, Tommi Rantala wrote: > Hi, Hey Tommi, Thanks for bisecting this. It's rather unexpected that you should be seeing problems here, but, the commit makes sense for it at least. Are you able to get me new kernel logs of both before and after this patch with "log_buf_len=8M drm.debug=0x14 nouveau.debug=disp=trace,i2c=trace,bios=trace" please? Thanks, Ben.