similar to: 2.2.5, Sol 2.8, W2k - Printers...Status: Access Denied unable to connect - ??

Hi folks, we are experiencing a problem when AutoCAD 2000+ drawing files are saved on a Samba (2.0.8) file share. Regardless of what the file is 'saved as', the name is always converted to all capitals. e.g. Drawing1 becomes DRAWING1 Just wondering if anyone else has experienced this problem. Seems strange that it is only AutoCAD files, but I think it is Samba related, not AutoCAD,

I have experienced a couple of (minor) problems with Samba Thought I would report these and ask if they are known problems. 1. Problem with "!" in username map file 2. Samba tools e.g. smbstatus, testparm not accounting for "config file" parameter 1. There appears to be a problem with a minor part of username map file interpretation. When I put an exclamation mark

I am using samba to share a directory that lives on an OpenBSD 3.1 box. The client is my linux box. I want to mount this directory so I can use my own tools on the linux box to edit the code. My problem is that there is a file "boucer" which is an executable and a "Bouncer" directory. I'm sure you can see my problem. I tried putting case sensitive = yes in the

p.s. forgot to mention parameter settings for the share we are having problems with preserve case = yes default case - not set - default = lower mangle case - not set - default = no ---------------------- Forwarded by Peter A Bryant/EngServ/QMR/Au on 24/05/2002 01:32 PM --------------------------- Peter A Bryant 24/05/2002 01:31 PM To: samba@lists.samba.org cc: Subject: AutoCAD

We are experiencing long delays when loading MX files stored on our samba fileserver. We are running version 2.2.7a of Samba on Solaris 8 servers. Using MX version 2.5 and higher on windows 2000 and XP workstations When the files are stored locally they load in a few seconds, whilst taking more than a minute to run from the Samba server. Our current workaround is to store the files locally,

We have a problem with file security settings changing when a file is edited by someone who is not the owner. When the edited file is saved, ownership is transferred to the person who edited the file. Also, access control settings for the file are reset to a default setting. This is a real problem, since in some cases it means that the original owner of the file no longer has permission to edit

Sorry to have to repost this (didn't get any response on the first post), we really need some of the fixes of the new Samba but cannot go ahead without the support for the older machines. Need to prove that Samba is the great product that I believe it is. Hi folks - I am having printing problems with our older machines. Printing is working fine for our Windows NT, 2000 and XP clients.

Hi, could someone who is close to the Samba development make a comment about the automatic printer drivers features in Samba 2.2.5 I've been trying to get this working unsuccessfully, and have seen many messages posted from people having trouble with this feature. Not sure if this is an unnusual number of people with problems, but it seems like it ( I could be too close to the problem to see

Did you change your "security" setting in your new Samba e.g. from "share" to "domain"? -----Original Message----- From: peter.a.bryant@mainroads.qld.gov.au [mailto:peter.a.bryant@mainroads.qld.gov.au] Sent: Friday, 14 March, 2003 7:00 AM To: samba@lists.samba.org Cc: John H Terpstra Subject: Re: [Samba] Win95 & Win98 - NOT WORKING - NT,2000, XP are ok (reposted)

Please lend me some expertise... Ok, I know suggesting a bug is a bit impolite, but I cannot find a solution for this and none of the helpful people who have responded have been able to help either... If I come off sounding a bit short it's just because I've tried many things to get these older clients printing. :-) Don't mean to annoy anyone. Appreciate any help! Have several

Thanks for the performance information John, I wasn't aware that optimising the conf could make such a difference. I guess my way of thinking - where I want to look at the original smb.conf file and have it nicely readable is a bit impractical, and maybe I will soon change that way of thinking, but I think it will help your work if you are aware of other peoples thought processes, (even if

Hi I've compiled and installed 2.2.5 on a Solaris 2.8 box. When attempting to browse the workgroup, a popup messages is displayed: Simple is not accessible. A device attached to the system is not functioning If I check the log file, the following error messages show up: ............ Jul 3 10:08:26 serv03 smbd[1544]: [ID 702911 daemon.error] [2002/07/03 10:08:26, 0]

Thanks for the suggestion Andrew, I was hopeful, but removing the writeable made no difference. Still prints from NT, 2000, XP but not from Win95, 98. Any other ideas? -peter. Andrew Bartlett <abartlet@samba.org> on 19/03/2003 07:05:29 PM On Wed, 2003-03-19 at 18:02, peter.a.bryant@mainroads.qld.gov.au wrote: > > > Please lend me some expertise... Sure! See below: >

Could someone who is familiar with the book "Samba-3 HOWTO and reference guide and who is also familiar with printer setup please give me some advice... I am summarising the procedure for setting up a printer for automatic driver download which is described in chapter 17. There are a couple of processes mentioned that look very similar and I am wondering if both steps are required for

A day or two ago I posted information about error messages I was getting in my logs after installing 2.2.6. No one has replied! Am I using the wrong list? If you don't mind looking back, please take a look at my message and provide some input! Thanks, Tait Shrum Bryant Public Schools

Hi, got a samba server which serves tons of printers. ok, 70. With some of them, driver installation from a win2k client works, with some it doesnt. printers are ALL configured the same in smb.conf: [(name in unix printing system)] comment = model of printer path = /tmp printable = yes browseable = yes for example: [ljwasat] comment = Hewlett Packard LaserJet 4000 N path =

Hi , i have the problem if somebody is member of more than 32 (Unix) groups every group bigger than number 32 will be cut off Debug Example : [2002/08/21 09:57:51, 3] smbd/sec_ctx.c:set_sec_ctx(319) 32 user groups: 500 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 [2002/08/21 09:57:51, 3]

Hi Folks, First let me introduce myself. My name is Mike Maki. I work as an IT specialist for a Federal agency, the National Park Service, in the Santa Monica Mountains National Recreation Area in Thousand Oaks. I have attended a few SCLUG meetings in the past at the old Nortel building but have not been able to attend lately. I do watch this list closely and have gained much from it. So why am

I'm trying to config a Linux box to integrate into a windows network using pam_smb and samba. Ive set it up so that using pam_smb I can get the user to log onto the linux desktop with their NT id and password. The only problem is once the user is logged on they need to be able to access shared resources disk, printers etc... without the need to reauthenticate to the domain, i.e. use a cache

hi 2.2.5, Sol 2.8 I have a perl script that I've written to convert a ps file to pdf file. I want the user to be able to setup a postscript printer in WNT/2k and convert ps files to pdf by printing to a [ps2pdf] printer share. [ps2pdf] comment = PS to PDF file in Home Directory path = /usr/spool/public guest ok = Yes print ok = Yes browseable = Yes printer = ps2pdf