similar to: net view \\BIGSERVER problems

I have been unable to get my Samba shares on RedHat 7.3, Samba 2.2.3a to be visible from my Windows 2000 SP1 server. From the DIAGNOSIS.txt tests (results below) I think that nmbd is not working properly, but it stops and starts fine, and a ps -A shows 1 X smbd and 2X(?)nmbd processes running, I have tried the suggestions there without luck and am not sure where to go next. I'd appreciate

Hi , I am using Mandrake 7.2 and trying to install samba to share my linux hard disk with Windows 98 ... Herewith my config and diagonstics : bigserver <------------> aclient runing : mandrake 7.2 Win98 Ip Addr.: 192.168.0.1 192.168.0.2 password encrypted activated activated - ping commands work fine on both ways, so my Tcp/ip

Hello, When I run the 'smbclient -L apollo' command at the UNIX prompt a I get an error. I have gone as far as I can in this DIAGNOSIS.txt file. Does anyone have any thoughts on what may be causing my problem ? I have made my comments to the DIAGNOSIS.txt file via '---- davidw {comment}' so you can see what I've done to date. Also, I thought I'd pass on the output

I'm trying to troubleshoot a new samba setup on a tiny network, and I'm clearly missing something. I'm running Samba 3.0.22 on Ubuntu Linux. When I first set it up, it seemed to go so smoothly. I changed all the workstations to the same workgroup (RABNETWORK) and they could see each other and the server, but they couldn't open anything on the server. I don't really understand

samba@samba.org ????????: > SAMBA Digest 2226 > >For information on unsubscribing see http://samba.org/listproc/ >Topics covered in this issue include: > > 1) RE: weird printing problems. > by "cbrink" <cbrink@allsportssupply.com> > 2) Re: weird printing problems. > by "John J. LeMay Jr." <jlemay@njmc.com> > 3) Connection

Any help appreciated. I am failing test 3 of the diags. It says to check hosts allow, This one is commented out in smb.conf It says to check hosts deny, There is no entry in my smb.conf It says to check valid users, My valid users = %S in my smb.conf It says to check my guest account, I am using the default nobody. (I am confused by this option, I can't follow the language in

I have a quick question about rsync's writing of files. I have a team of people that all use the host BigServer, which is running rsync as a deamon, as a central place to keep all shared files backed up. The "master copy" for any given file is considered to be the local file that somebody has worked on -- i.e., BigServer is NOT considered the master copy. BigServer is the backup

Everything else works, but "nmblookup -B ACLIENT '*'". It shows the servers IP address, unless "ACLIENT" can be resolved thru hosts/dns. Can someone explain me why? Samba 2.0.5b on Linux 2.0.36 name resolve order = lmhosts host wins bcast dns proxy = No wins proxy = No wins server = mywinsserver.mydomain wins support = No

I first asked this question at the end of October, got a response which didn't solve the problem, and have finally got back to the issue now. I'm running 2.2.7a, recently upgraded from 2.2.0 as Domain Logons for Win2K were suspected to be part of my problem. Anyway, the issue relates to AutoCAD (actually a vertical product called Land3) and a command which works with winXX boxes, but

dear Sir, i am running red hat 6.2 on one machine and windows 95 on another but i am unable to see the linux machine in my windows pcs network neighborhood.to check my samba server i tried the tests given in DIAGNOSIS.txt.I am able to run tests 1 to 4 without error but in test 5 which says ::: "test 5 : run the command "nmblookup -B ACLIENT '*'" You Should Get The

Hello fellow samba users, I'm trying to setup my samba server on my linux box, went through the installation and stuff, but ran into a whole world of problems when testing it out (samba2.2.8). As I'm reading through the DIAGNOSIS.txt file included in the docs, I got stuck on Test 7. when I run "smbclient //bigserver/tmp" I get prompted with a password. when I type in my

We have some speed/performance issues: We have a 100M fullduplex private network setup to handle rsync transfers to our "mirror" server with a command like: time rsync -e ssh -avzl --delete --rsync-path=/usr/local/bin/rsync \ --exclude ".netscape/cache/" --delete-excluded \ bigserver:/staff1 /mirror/bigserver It takes about 20 minutes to check/transfer files from

I have a situation that I think might be a bug, but would like someone else to have a look at before I create a report. Here's a list of the source: drwxr-xr-x. 8 root root 4096 Feb 24 10:56 current -rw-r--r--. 2 root root 2427204 Feb 21 12:18 qmailadmin-toaster-1.2.16-1.4.1.src.rpm -rw-r--r--. 2 root root 24875 Mar 1 2012 qmailmrtg-toaster-4.2-1.3.7.src.rpm -rw-r--r--. 2 root root

Hello everyone. I apologize in advance for a simple question yet hard to a beginner. I'm new to SAMBA - 1 1/2 days old. I'm in the process of configuring/testing SAMBA in our RISC test box. I am now stuck on TEST 5 below. TEST 5:-------run the command "nmblookup -B ACLIENT '*'"You should get the PCs IP address back. If you don't then the clientsoftware on the PC

I've got a server running FreeBSD 6.2 and PF. The server has a couple dozen jails on it. Previously, I had a few "private" services such as MySQL running on loopback IPs (127.0.0.2+) and the rest of the jails running on the public IPs. I have to renumber my machine with a new block of public IPs so I thought I'd be clever and move all the jails onto loopback IPs. Then

Hello everyone, I had been struggling with the issue, and eventually found the root cause. But I noted it's not mentioned here, or on the internet. Solution below, after the details. The symptoms are that on Windows 2000 you can C:\> net use X: \\server\share (maps the drive successfully) and C:\> net view \\server (lists the various services). But doing this: C:\> net

On Thu, 2 Aug 2018 11:17:47 -0400 pisymbol <pisymbol at gmail.com> wrote: > On Thu, Aug 2, 2018 at 11:11 AM, Rowland Penny via samba < > samba at lists.samba.org> wrote: > > > On Thu, 2 Aug 2018 11:02:45 -0400 > > pisymbol <pisymbol at gmail.com> wrote: > > > > > Whoops! Replying to all! > > > > > > On Thu, Aug 2, 2018 at

I am working on updating the Shupp toaster, http://shupp.org/toaster/ a set of files and instructions for installing qmail, vpopmail, qmailadmin and squirrelmail. Two of my most important goals are switching the imap program from courier to Dovecot, and closer integration with OpenSuSE. (Which I run my mail servers on.) To follow the style of the toaster I need a place where I can obtain the

I am using the trees[1] plugin to encrypt the mail on my disk. Because I don't want it to store any metadata in plaintext, I've also set INDEX=MEMORY in my mail_location configuration. However, whenever I get new mail I get errors like the following showing up in the journal: lmtp(john at octet.space)<21780><QDkrBqTXclwUVQAAQHGRUQ>: Error: Mailbox INBOX: Saving mail:

This is getting real tough to debug. titan : Solaris 8 running samba 3.0.31 aequitas : OpenSolaris running samba 3.2.0 I can do basics test just fine : # /usr/xpg4/bin/date -u;/opt/csw/bin/findsmb Sat Jul 12 22:50:51 GMT 2008 *=DMB +=LMB IP ADDR NETBIOS NAME WORKGROUP/OS/VERSION