similar to: Case Sensitivity vs. Case Preservation

Is there anyway to ascertain what shares a client actually has mounted at a given time? I've got a number of WFW boxes connecting shared drives on my SCO-OSE3 box using SAMBA 1.9.16p5 (upgrading to latest version RSN). I've got some shell scripts on the Unix box which use escape sequences sent to the client telnet to start programs on the client side. Some of these programs assume

-------------- next part -------------- Hello everybody!!! First of all I must say that I'm not an English speaker, so this text may sound a little extrange. I apollogize..... Well, I'm having problems with the SMB printing system. I have spent a lot of time (nearly 15 hours and a houndred of configurations) in it but I could not use it as a printing server. System Configuration: One

My server is RH 5.2 and i use Samba 1.9.18p10 and the client use WFW 3.11 with tcp/ip protocols installed. The subnet and the IP Address is right but I still only telnet form WFW 3.11 to Linux...not the reverse. On Linux telnet is working. I've checked it through this cmdline "telnet localhost 23 or telnet 127.0.0.1" . And I also testparm smb.conf and nothing wrong happen. FYI I set

On Fri, 27 Mar 1998 samba@samba.anu.edu.au wrote: > Date: Thu, 26 Mar 1998 09:54:21 -0500 > From: "W.J. McEachran" <billjr@penny.com> > Subject: Re: What shares are mounted on client ? > > On Wed, Mar 25, 1998 at 09:51:07PM -0500, Charlie Brady wrote: > > > WFW can be configured to delay the connect on shares until it is actually > > required. I

I have installed samba for the first time and I try to start it in a windows 95 environement. I started nmbd and smbd with the config file listed at the end of this mail (I remove all comment for clarity) I expect to use samba with the SHARE protocol of Windows 95 (No WINS) The new server (sdmpcsv02) is recognised by the other pc's but the can list the exported files The smbclient -L

Dear All, we have shared a directory which includes several subdirectories from a Unix server. Browsing the subdirectories on an Windows 3.11 Client leads to an unestimated result. All files in the second subdirectory-level are invisible. The files in the first subdirectory-level could be accessed normally. This is only a problem on WfW Clients, browsing the directories on a NT host leads to no

Hi, Sorry if this is the documentation somewhere; however, I need a little tutorial help on howto configure a Wfw client for Samba: I have two samba servers, 1.9.18p2, on a couple of our Sun machines running Solaris 2.3. I know how to gain access from various Win95 machines in our group; however, I was requested to set up access for a Win3.11 machine today, and I'm kinda stumped. This

Hi, we're having quite a strange problem with our Linux samba (1.9.18p10) server: when doing a directory list from a Windows for Workgroups 3.11 Client all files an directories appear except <.> and <..>. While this is not a serious problem when using ?dir?, some applications (e.g. Ami Pro 3.1) seem to rely on these entries. In the file dialogues this particular application does

Hi. I wanted to set diskless win95 but I read the list archives and I decided not to do it diskless. So I tried diskless windows but I got a problem. I do this. 1.- I did booting images with bootware proms. 2.- I managed to install DOS clients from microsoft. That was painfull because the one I downloaded from MS didn't connected to my samba server. I used a dos clients that creates a NT

Hello all, I' ve got a strange problem since I' ve installed the latest version of Samba. My configuration: Hardware- & Software-Configuration: Server-OS: AIX 4.3.0.0 Samba-Version: 2.0.5 Clients: WindowsNT Workstation 4.0 SP 5 and AutoCAD Version 14 Every Application I'm using is coping very fine with the new Samba-Version, but AutoCAD behaves a little strange! When I open a

I have two Windows 2003 Standard Edition Server with 2x 3,0 GHz P4 and 4 GB RAM. On each server rsync runs as cygwin daemon (rsync version 2.6.6; protocol version 29). The two servers are connected through a 2 MBit VPN link. When I sync a single large file or a whole directory, rsync only uses 50% of the available bandwidth. When I do the same between windows and linux server, rsync takes the

Hello everybody I have trouble with my Samba server (1.9.16.P11 or 1.9.18.p0) / LinuX Redhat 4.2 (or SuSE 5.3)(kernel 2.0.30). Here my typo: 1 Samba server 10 Windows 95 clients 2 Windows 98 ....(I 'm a poor guy I know !!) All work fine when the windows users log on the server with different name . (I try with "netlogon" and without it). They have valid unix account and

Hi. I followed the advises from yours but I still can't do tcp/ip from wfw when booting diskless. I was told to run the wsahdapp.exe file, but when I do it windows tells me : winsock api Instalation Error The DOS sockets TSR is not loaded and of course when I try to run netscape it tells me: Netscape was unable to create a network socket connection There may be insufficient system

Hi We are using a Debian 1.3.1 server (two Ethernet-Cards) with 18 Clients. The Clients remote-boot from the server using mars_nwe(Novell-Server emulation). Under Windows (WfW 3.11) the Clients user the Microsoft 32-bit Tcp-Stack to access the samba-server( 1.9.18p7). The problem is that the clients can't see the samba-server in their browse-lists, nor can they access the server with net

As I mentioned in a previous note, I'm a new Samba administrator. I'm trying to set up both roving profiles and system policies on the Win 95 machines in our computer lab here. I have used the policy editor (POLEDIT.EXE) to define a CONFIG.POL, which I have placed in the [netlogon] share. I also used a newly-installed Win 95 machine to create the exact *initial* configuration of desktop,

Hi, Can anybody confirm the following problem: Sequence: bash-2.05# grep ankerpos /usr/samba.moonrock/private/smbpasswd ankerpos:921:XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX:XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX:[U ]:LCT-0 bash-2.05# /usr/samba.moonrock/bin/smbpasswd -c /usr/samba.moonrock/lib/smb.conf ankerpos New SMB password: Retype new SMB password: bash-2.05# grep ankerpos

samba@samba.org wrote: > SAMBA Digest 2150 > > For information on unsubscribing see http://samba.org/listproc/ > Topics covered in this issue include: > > 1) Autoconnect on restarts doesn't work > by =?iso-8859-1?Q?Str=F6mberg_Peter?= <Peter.Stromberg@scania.com> > 2) Re: How to backup from Win to Linux using smb? >

Hi folks, in our group we're working with samba on a SunOS 4.1.3 workstation and about 30 wfwg and win95 clients for several time without any trouble (samba-1.9.16p6 release). Now i've installed version 1.9.17p2 and got the following problem: I can't reach directories on an automounted volume on the Server which is not currently mounted by changing directory to that drive on the

I have just upgraded from 1.9.16p9 to 1.9.17. Platform: SunOS 4.1.4 In a DOS window under WfW 3.11 I can not delete any files, including ones created in the same DOS window, unless I wild card them: fails: del a.txt works: del a.* Any ideas gratefully received! Regards, Mark.

Hi, Quick q. Has anyone tried this, and what's the success/failure of this? Changing param/loadparm.c : /* Types of machine we can announce as. */ #define ANNOUNCE_AS_NT_SERVER 1 #define ANNOUNCE_AS_WIN95 2 #define ANNOUNCE_AS_WFW 3 #define ANNOUNCE_AS_NT_WORKSTATION 4 static const struct enum_list enum_announce_as[] = { {ANNOUNCE_AS_NT_SERVER, "NT"},