similar to: Win98: net use works, Map Network Drive doesn't; no browsing, either

Hi all, All Win98 & Win2k used to be able to connect, but as of last week only one Win2k is able to access the share folder, but not without a little issue. Another Win2k in the same subnet have intermittent connection issue and Win98 is not able to access the folder. Setup: Samba 2.2.2 install into Solaris8 in a subnet with two other Win2k server. This subnet is connect to a number of

I've got a samba server, acting as 95 PDC, and WINS, on 1 subnet. It is routed to another subnet. All PCs use the same workgroup name. How can I get the PCs to all appear in Network Neighborhood? They all register with the samba/WINS server. "Find Computer" works, but only PCs in the local subnet are visible when you open NN. Any hints? I've tried "remote announce =

Hi Andrew, revisiting this subject once again because I seem to have reached an impass. -<| Quoting Andrew Bartlett <abartlet at samba.org>, on Monday, 2018-09-24 07:14:48 PM |>- > On Mon, 2018-09-24 at 09:06 +0200, Philipp Gesang wrote: > > > A long time ago I posted a script to dump the machine password to > > > stdout for the benifit of an 802.1x client, but

On Fri, 2018-10-12 at 16:59 +0200, Philipp Gesang via samba wrote: > Hi Andrew, > > revisiting this subject once again because I seem to have reached > an impass. > > -<| Quoting Andrew Bartlett <abartlet at samba.org>, on Monday, 2018-09-24 07:14:48 PM |>- > > On Mon, 2018-09-24 at 09:06 +0200, Philipp Gesang wrote: > > > > A long time ago I

On Mon, 2018-10-15 at 16:05 +0200, Philipp Gesang via samba wrote: > -<| Quoting Andrew Bartlett <abartlet at samba.org>, on Saturday, 2018-10-13 08:09:31 AM |>- > > On Fri, 2018-10-12 at 16:59 +0200, Philipp Gesang via samba wrote: > > > Hi Andrew, > > > > > > revisiting this subject once again because I seem to have reached > > > an

Has any one seen this? Samba v2.0.4b running on SunOS 5.7 and another on SunOS 5.6 Everything works great under W95,W98, NT4 and Win2k except you are unable to rename folders from a win2k machine Error Renaming file or folder Cannot rename %name_of_folder%:Access is denied. Make sure the disk is not full or write-protected and that the file is not currently in use. OK You

We have installed versions (1.9.18 and 2.0.3) of Samba successfully on AIX based servers without any problems. We are now trying to install Samba v2.0.4b onto a Digital UNIX 4.0d server. Everthing has installed correctly. Shares can be created through editing the smb.conf file and then accessed correctly through our NT network as desired. The problem we have is using the SWAT interface. We can

-<| Quoting Andrew Bartlett <abartlet at samba.org>, on Saturday, 2018-10-13 08:09:31 AM |>- > On Fri, 2018-10-12 at 16:59 +0200, Philipp Gesang via samba wrote: > > Hi Andrew, > > > > revisiting this subject once again because I seem to have reached > > an impass. > > > > -<| Quoting Andrew Bartlett <abartlet at samba.org>, on Monday,

Hello All, First, I am new to Linux. I am having troubles with NT4 SP3 and samba-1.9.18p5: some NT4 nodes can map Linux and/or Unix drives, some others can't. The errors messages are: - this account is not authorized to login from this station or - incorrect password or unknown username (but I am sure that login/password are ok) I have already check the EnablePlainTextPassword = 1 in the

Using Ubuntu 6.06.1, Samba 3.0.22, VMWare. Cannot access shares using netbios name, but ip address works. >From a workstation command prompt (member of same domain as samba), used net view netbiosname and got system error 5, used net view ipaddress and got list of shares. Ran ethereal and attempted a session with the server using netbios name. NBSS and SMB packets are being exchanged

-<| Quoting Andrew Bartlett <abartlet at samba.org>, on Tuesday, 2018-10-16 05:17:13 AM |>- > On Mon, 2018-10-15 at 16:05 +0200, Philipp Gesang via samba wrote: > > -<| Quoting Andrew Bartlett <abartlet at samba.org>, on Saturday, 2018-10-13 08:09:31 AM |>- > > > On Fri, 2018-10-12 at 16:59 +0200, Philipp Gesang via samba wrote: > > > > Hi

My LAN has a single linux/samba server as a PDC/file server, and several windows workstations. The workstations get their IP addresses from a Linksys cable router DHCP server. I can't get the linux machine to resolve the NETBios names of the windows machines. >From the Linux machine I can see the Internet through the DSL router, I can ping the windows machines by IP address, but

hello list: i am learing smb protocol. i lookup NBT SESSION REQUEST PACKET from rfc 1002. SESSION REQUEST PACKET 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 3 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | TYPE | FLAGS | LENGTH |

Hi all, since yesterday, we've got a strange problem in our network: (6 samba servers, several NT40 WS, 2 Citrix Winframe servers) >From one minute to the next, nobody can browse the network neighbourhood !! Making network connections through explorer, using extras/connect network drive is possible but only by inserting the path/share manually !! Please don't beat me if this is

Hi- I'm having a recurring problem with Windows XP and a Samba share on logon. More specifically, I have a Samba (v 3.0.24 on Debian Etch) share with share permissions (not a domain) mapped to a drive in Windows XP Pro. Whenever someone logs onto an XP Pro computer in the network the drive isn't there. Here's an example: Say there's a document on the shared drive and a

I having difficulty getting browsing to fully work across two subnets. The subnets (having private addresses - 192.168.x.0) are connected by Linux boxes (RH6.1, one for each subnet) functioning as firewall, IP masquerade and router. On one subnet (call this one LEFT), there is an NT4.0 server as the PDC (also running WINS and DHCP) along with 50 or so clients and other servers (NT, Win9x) in

Hi, My New Year's resolution is to complain (constructively) whenever I get a spurious build failure email from a buildbot. For new or infrequent contributors especially, they can be extremely confusing and unnecessarily alarming. This one below is the first build ever attempted by the builder, so how on earth can it have come up with a meaningful blame list? And in any case, surely we

On Wed, 27 Mar 2019 13:11:08 +0000 Rowland Penny via samba <samba at lists.samba.org> wrote: > On Wed, 27 Mar 2019 13:00:42 +0100 > Franta Hanzlík <franta at hanzlici.cz> wrote: > > > Yes, is no difference between '-UAdministrator' and '-U > > Administrator'. But it seems, as ldbsearch in 4.9.5 is different than > > 4.9.4-. (I was furious

I can force a browser election with the Win98 command: net view /workgroup:workgroupname However, that does not work on NT (and I haven't tried it on W95). What I'd really like is a command from the Linux command line to force the election. I've looked everywhere and can't find it. For my purposes having preferred master=yes and restarting Samba is not an option. Does anyone

I am running a small network consisting of a few Win98 machines, 2 NT (SP6) machines and a Samba 2.0.6 PDC. I am using domain logons, and everything is working fine. However, when I try to list the shares on a Win98 box fron an NT machine, having logged on with a domain-authenticated account, the Win98 boxes return an "Access Denied" error. If I do the same with a local account on the