similar to: Samba printing to unsupported linux printers

I have had a RH5.2 server running Samba up for a long time. I upgraded to Mandrake 6.0. It broke Samba, so I reinstalled using the RPM on the CD. Samba works just fine, but SWAT will not! If I try to start it manually (/usr/sbin/swat) it just hangs. In /etc/services I have a line like this: swat 901/tcp In /etc/inetd.conf I have: swat stream tcp nowait.400 root

Hi Here the problem. I am using samba 2.0.10 on sparc Solaris 8 platform in a Nis env. Currently we have about 100 or so printers listed in printers.conf nis map, these printers cover our 5 sites which all use the same nis env. Each site has one Domain master, and a local master on any separate subnets, as not all is in the same domain. When ours users log into a samba server they are

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello: I've configured a Linux box with Samba to act as a secondary domain controller for an existing NT server. I've gotten everything working very nicely, all my file shares set up, etc. I've got 6 printers that I need to set up as print shares. The ones that speak Postscript or PCL were very easy to set up, and work admirably.

Hi, I'm trying to install the Xerox docuprint 4517 driver in my centos box but I cannot see the driver in the drivers list when I try t add the printer. - I download the file Linuxi386XPXX_4.00.60.tar from the Xerox site which is the printer driver. - did untar the file in the install directory. - ran the setup file - reboot the server After doing this I still cannot see the driver.. Any

Please please help! I have a Redhat server 7.2. It has been running fine for nearly 18 months. I recently changed the IP on this computer and am now unable to use the printer via Samba. The printer is fine on the local box and prints without hesitation. If I add an new printer on a windows box and browse for it it shows up under the Samba share and even allows me to install. However when I

Hi; I can't seem to find anything in the docs that quite matches this, but if there is a doc, just point me to it. The situation is this. I have samba running on my home net. It's running as a standalone server in user mode so that users on computers at home can have home directories and and access to the printer. When I bring my laptop home from work, I occasionarlly need to print

> For one, the OP wanted an MFC, not just a printer. For another, I have an > HP 1018, and yes, it works fine, even though it's an Evil Winprinter (you > do *not* need to know what I went through to set up my router to serve as > a printserver to a USB Winprinter). Finally... I have, literally, a > handful of online vendors that I like and recommend. For this, >

Hi all. I would like to print from a Linux Server to a printer connected to a Windows ME machine. I'm able to connect via smbclient, with smbclient //windowsme/printer -U '' -N and I receive the smb> prompt Now, when I try to print any file, nothing comes out from the printer. The printer is a Canon LBP-810 which, according to www.linuxprinting.org site, is a WinPrinter. My

Michael Hennebry wrote: > My HP USB C3180 All-in-one printer accepts jobs, but does not print. > A job simply sits in the queue. > I haven't used it on this computer for a while. > It will print a test page when I connect it. > > The last line from hp-info -i > is > 04/07/17 13:26:21 5012 Device communication error hennebry 0 > (I've removed some

Styma, Robert (Nokia - US/Phoenix) wrote: > I have picked up the HP LaserJet 1022n on eBay. It is black and white > only, but works well with Linux and all versions of Windows I have > available. They are generally inexpensive on eBay and the tone is cheap. > I can get 4 toner cartridges for around $25 on eBay. It is small, > dependable, and makes a good second printer. Most

Well, the router I've had for some years now, that I had DD-WRT on, borked itself. Went out and bought a new one, an Asus RT-AC66U. Now, I've got this 11 yr old cute HP Laserjet... and it's a winprinter. With the version of the DD-WRT I had, all I had to do was send the magic M$ data to it, it would wake up, the lights on the printer telling me that it was installing that. New printer

Hi, last friday I upgraded from dovecot-2.3.10.1_2 to dovecot-2.3.11.3 (FreeBSD). Since then, I started having some issues with some customers. The log I see is like: pop3-login: Disconnected (tried to use unsupported auth mechanism): user=<username at domain.it>, method=USER, rip=x,y,x,z, lip=x,y,w,z, session=<e5KkR5qto8hPAL9q> While, before upgrade, same user logged

Hi to all the people again, I was writting a simply function in R, and wish to collect the results in a excel file. The work goes as follows, Ciervos<-function(K1, K0, A, R,M,Pi,Hembras) {B<-(K1-K0)/A T1<-(R*Pi*Hembras-M*Pi+B)/(Pi-M*Pi+R*Pi*Hembras) P1<-Pi-B R1<-P1*Hembras*R M1<-P1*M T2<-(R1-M1+B)/(P1-M1+R1) P2<-P1-B R2<-P2*Hembras*R M2<-P2*M

I've got an old HP LaserJet 1018. It's a winprinter. After I bought a new router (to go inside the Verison one), I plugged it directly into my box (ok, via a hub). I run CentOS 6. Before we went on the trip, I could print, I upgraded my system, and this is the first time I'm trying to print... and no joy. I've tried sending the firmware to it via lp -o raw ... -h :9100, and

Hi, I have been trying to create a function to generate a Procrustes plot, generated from package "vegan" in lattice. standard vegan code as follows library(vegan) pro=protest(P1, P8, permutations=4999,choices=1:4) plot(pro) Now, here is the code for the function that I have failed to get to work properly. panel.procrustes=function(x,y) }Pro=protest(x,y,permutations=4999,choices=1:4)

Hi, On Tue, May 22, 2012 at 11:35 PM, Sebastian Pop <spop at codeaurora.org> wrote: > Hi Ivan, > > On Tue, May 22, 2012 at 5:09 PM, Ivan Llopard <ivanllopard at gmail.com> wrote: >> Hi Sebastian, >> >> On 22/05/2012 23:25, Sebastian Pop wrote: >>> So my question is how do we specify that for most of the operations i8 >>> should be promoted

I am having trouble setting up our two HP TCP/IP printers under samba. Both of these printers are listed in the /etc/printcap and printing works fine from linux. Bellow is a copy of the /etc/smb.conf file: ; /etc/smb.conf ; ; Make sure and restart the server after making changes to this file, ex: ; /etc/rc.d/init.d/smb stop ; /etc/rc.d/init.d/smb start [global]

Hello, To my great satisfaction I managed to run with a windows program which I use in my company (invoices, supplies etc). The program runs well except printing... When I try to print to my cups printers I get the following infos: fixme:winspool:WINSPOOL_EnumPrinters We don't handle PRINTER_ENUM_CONNECTIONS fixme:winspool:WINSPOOL_EnumPrinters We don't handle PRINTER_ENUM_CONNECTIONS

Dear list, I have 9 repeated measures (measurement variable == 'Delta13C') for individuals (ID variable == 'Individual_ID'. Each repeated measure is "indexed" (right term?) by the variable 'FeatherPosition' and given as c('P1', 'P2', 'P3', 'P4', 'P5', 'P6', 'P7', 'P8', 'P9'). I would like to

Hi everyone, I have a question for R code to merge. Say I have two dataframes: File1 is: V1 V2 V3 V4 1 100 101 name1 2 200 201 name2 2 300 301 name3 3 400 401 name4 3 500 501 name5 4 600 601 name6 4 700 701 name7 File2 is: V1 V2 V3 V4 1 50 55 p1 3 402 449 p2 4 550 650 p3 4 651 660