similar to: Logging on to the network - one samba, two subnets.

I think this has been addressed a few times, but without quite satisfactory results. I have a private subnet behind an NAT proxy server (IPMASQ), and a public subnet on the other side with the NT PDC on the public. (Using both NetBEUI & TCP/IP). The PDC will change later, but currently I'm trying to find out how this all works before I do that. I'm trying to make a client machine on

>From: "Eddie Irvine" <eirvine@tpgi.com.au> >To: <samba@samba.anu.edu.au> >Subject: Logging on to the network - one samba, two subnets. >I have Samba set up to serve W95 PCs. Kids "log in to the >network" using their Unix password. Students get their >Unix home dir mounted as network drive X: when login is >successful.> >This all happens

Hi, I had similar problems with Samba and speed. To begin with, I thought it was a Samba problem, and spent a lot of time stuffing around with smb.conf Then, just to make certain it was Samba and not a generic TCP/IP problem, I tried ftp'ng a big file to and from the Samba server from W95. Speed was only 20 k/sec - about 2% of the expected speed of a 10-Base-T network. Same for FTP'ng

Hi, I've had extremely bad smbclient put performance when connecting from my Linux box to a Windows 95 box. I only get about 10KBytes/s! All other forms of data transfer work fine, and I get from 600-700KBytes/s. This is on a local 10BT LAN. I've seen a few other reports of this, but no solutions as of yet. smbclient does puts just fine to another Linux/Samba Server. I'm using

Is there any way to set up a backup WINS specification in dhcp/Win NT/Samba? Having my WINS server go down the last few days made this a little more desirable, especially since when I noticed the service was dead, I wasn't able to reboot it for a few hours due to usage. Thanks, Bill -- Bill Eldridge Radio Free Asia bill@rfa.org

I'm trying to figure out an intelligent way to install apps on the network server, and be able to install once and have all the clients use this. However, it seems like most installations modify the registry and seem to demand a client-by-client installation. Am I missing something on this? Can someone provide me some hints or references to help this? (And is anyone thinking about a SMS/ZEN

Hi Konrad, Today i tried linuses tree of today (last commit is 4c4d285ad5665bfbd983b95fde8d7a477d24a361). It boots dom0 fine, but it fails to start any domU with: "Error: Failed to query current memory allocation of dom0." With my previous 3.1.5 kernel everything is fine, nothing else changed in config in between. dmesg and xm dmesg attached -- Sander Dom0 shows: total

Hello, I have a script on a production system at work that mounts an NT-exported share for NFS re-export to some NFS-only clients. The system was RedHat-4 and samba 1.9, and used the following style command line (names have been changed to protect the innocent :-) smbmount //host/share /mnt/point -c HOST -U user -P passwd \ -u nobody -g nobody -f 666 -d 777 Now the system has been upgraded to

Hello, Since the ipmasq package has been dropped from debian I decided to migrate to shorewall. My setup is pretty simple: [DSL Modem] -eth0- [shorwall/gateway] -eth1- [local network] ipmasq required that I set the MTU on eth0 to 1492. Migrating to shorewall went well, but a small number of web sites would load slow or not at all. Setting the MTU on eth0 to 1492 and setting CLAMPMSS=Yes

I know this is off-topic to the list, but someone asked me to make the information that I garnered about Dell Poweredge systems available to the list. So, here it is. Basically, after a search on dejanews, I came across this article: http://x5.dejanews.com/getdoc.xp?AN=430135686&CONTEXT=917266543.1696071777&hitnum=19 In it, someone states that there are drivers for the PERC RAID

Eric, I am busy trying to grasp the browse list concept. We have subnets and dial-in accounts. From what I have read you may have to get your Linux box act as aWINS server and have to dial-up user use the wins server to resolve names on the brows list. The browse list is updated every 12-15 minutes ao your dial-up account might not show upat first. This has caused me some trouble at first as I

Samba Gurus: I just upgraded from samba-1.9.15p8 to samba-1.9.18p8 on one of our Sun boxes (Solaris 2.5.1). When I try to connect to the samba server from another machine with smbclient I get the following error message: smbclient -L odin Added interface ip=192.10.11.32 bcast=192.10.11.255 nmask=255.255.255.0 Server time is Wed Oct 28 15:17:47 1998 Timezone is UTC-5.0 Password: Session setup

Hello, My server is on Mandrake 10.1 off. eth0 is WAN with static IP connected 512 DSL eth1 is LAN. I have NAT working on 192.168.0.0. I want to feed a second subnet 192.168.21.0. What is the best way to implement it ? Thanks Varun

Hi everybody, I have set up a Linuxbox with Samba and security=server in smb.conf. So far this works, the users are authenticated on the NT-Server as they shuold but then they´re mapped to guest user. When I create the User on my linux box with the same username as on the NT-Server it works OK, no matter what password this user has on the linux box. The real problem is, that I don´t like the Idea

Hi! I just recently entered the wonderful world of the so called "advanced routing" and decided to try and limit the bandwidth of a MASQed network here and ended up in trouble :(. The setup is (as far as I can tell) pretty straightforward. eth0 is connected to the "real" network with a proper IP, and eth2 is 192.168.10.x (the MASQed network). All of it is basicly right out of

Nicholas: Regarding your problem: "The SGI server is only serving files, no home directories, no printers (we have separate NT servers for each of those functions), and it is using "SERVER" level security. Encryption is on. Guest logins are disabled ... I'm confused greatly by this - one day, a user's login will work, another day, it'll suddenly stop working. "

I can't seem to make the fax detection work. Here's an excerpt from zapata.conf: signalling=fxs_ks group=0 context => guestaccess channel => 47-48 and from extensions.conf: [guestaccess] include => incomingmain [incomingmain] exten => s,1,Dial,Zap/1&Zap/9&Zap/10&Zap/11|24 exten => s,2,Voicemail,u7000 exten =>

Hello, I was wondering wether there's a function in R that takes two vectors (of same length) as input and computes mean values for bins (intervals) or even a sliding window over these vectros. I've several x/y data set (input/response) that I'd like plot together. Say the x-data for one data set goes from -5 to 14 with 12,000 values, then I'd like to bin the x-vector in steps of

How can we set up the policy working for different users (belonging to diffe rent groups) on the same win98 machine? Win98 looks up the netlogon share on our Samba server in security level = us er, domain logons = yes. It parses the config.pol file, but the only group policy defined that applie s to ANY user logging on is the one for Users group I added in Policy Editor .. eirvine

I?m trying to find datasets that will give me residuals, after applying the lm function, with no normality, non linearity, and heteroscedacity so I can try to exemplify those cases in the linear regression model. Can you give any advice on what datasets would be appropiate? I can?t use the ones in the alr3 package because those have already been seen in class. Thank you very much :-) natorro