similar to: rsync bugs

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello list Recently I have discovered that my users are getting \\fileserver\userdrive mapped as homedir instead of \\fileserver\userdrive\<username>. I played around abit and discovered the following: g-file samba # smbclient -L localhost -U jrnielsen%<mypassword> Domain=[NORDIC] OS=[Unix] Server=[Samba 3.0.11] Sharename

Does anyone on the list have definitive information on whether ZFS works with CLARiiON devices? bash-3.00# uname -a SunOS XXXXXXX 5.10 Generic_118833-33 sun4u sparc SUNW,Sun-Fire-V245 bash-3.00# powermt display dev=all Pseudo name=emcpower0a CLARiiON ID=APM00033500540 [XXXXXXX] Logical device ID=600601607C550E00F25F4629AFBEDB11 [LUN 61] state=alive; policy=BasicFailover; priority=0; queued-IOs=0

Hello All. I'm working on building support for the Clariion range of standby power supplies. I've found you can get hold of these easily on ebay like: http://www.ebay.co.uk/itm/EMC-CLARiiON-Standby-Power-Supply-118031985- SPS-1000W-/160373295258 There is a problem that I haven't been able to work around. After 90 seconds without power, the device shuts down. This is because

Hi! This is the ezmlm program. I'm managing the zsh-users@sunsite.dk mailing list. Acknowledgment: I have added the address r-devel@r-project.org to the zsh-users mailing list. Welcome to zsh-users@sunsite.dk! Please save this message so that you know the address you are subscribed under, in case you later want to unsubscribe or change your subscription address. --- Administrative

Hi! This is the ezmlm program. I'm managing the zsh-workers@sunsite.dk mailing list. To confirm that you would like r-devel@r-project.org added to the zsh-workers mailing list, please send an empty reply to this address: zsh-workers-sc.1061662219.apmgpacfakhblbeaiobp-r-devel=r-project.org@sunsite.dk Usually, this happens when you just hit the "reply" button. If this does

Hi! This is the ezmlm program. I'm managing the zsh-users@sunsite.dk mailing list. To confirm that you would like r-devel@r-project.org added to the zsh-users mailing list, please send an empty reply to this address: zsh-users-sc.1061671108.bhdfflnhpbojcmdbpdde-r-devel=r-project.org@sunsite.dk Usually, this happens when you just hit the "reply" button. If this does not

On 06/25/2015 01:20 PM, Chris Adams wrote: > ...It's basically a way to assemble one arbitrary set of block devices > and then divide them into another arbitrary set of block devices, but > now separate from the underlying physical structure. > Regular partitions have various limitations (one big one on Linux > being that modifying the partition table of a disk with in-use

A couple years ago, we moved to Oracle RAC on Linux using ocfs that is SAN attached to an EMC CLARiiON. At the time, there was a reason that we did NOT use EMC's Powerpath (I just can't recall what that reason was). What I'd like to know is if there are any issues with introducing Powerpath now. * RHEL 2.1 AS * 2.4.9-e.38enterprise * ocfs-2.4.9-e-enterprise-1.0.13-1 * EMC

Hello, I've just spent the last two days sifting through the archives of this mailing list and although I found one or two references to my problem I've been unable to find the solution. I'm running Samba 2.0.4b on two machines: E3000/Solaris 2.5.1 E3500/Solaris 2.6 My clients are running under NT4.0 . I'm using the mode security = server. Everything works fine most of the

I have used NUT for many years to monitor our network connected UPS units...until recently they were all APC units. We replaced an old APC Silcon datacenter ups with a GE LP33 unit. It has a network card for web access and snmp support. How do I configure NUT to talk to the LP33 UPS unit? Thank you. -Bob -------------- next part -------------- An HTML attachment was scrubbed... URL:

On 6/29/20 11:20 AM, Gordon Messmer wrote: > ... > In the event of a power loss, many servers will boot faster than the > managed Ethernet switch they are attached to.? Systems managed by > network-scripts may not set up their network because there is no > carrier at the time that networks-scripts start up. > > Network-manager, on the other hand, will set up networking

Os is redhat enterprise, kernel 2.6.18-164.2.1.e15 NUT is apparently 2.4.1 It was installed by tar. Monitoring a lot of apc UPS units-mostly Smart-UPS of various flavors, also a Silcon DP380E. Normally works just fine... "upslog" writes status log every 30 seconds with various parameters.. Every so often, one of the UPS units has a log entry of:

Hi I’m currently trying to implement the Opus codec on a nRF 52 DK (from Nordic). One main goal of my project is a low power application that can record and send audio data (16+ kHz) over BLE. Therefore, the Opus audio codec would be suitable to encode audio data, send it over BLE and decode it on another chip. Unfortunately, I have some trouble implementing it. There are different parts to the

move or copy the directories mass, nnet and class to the library directory - then execute link.html.help() Now execute library(MASS) and data(petrol) Should work. "Troels Ring"

Hi All, I was wondering whether there have been some listening experiments done to test how well spatial information is preserved in the celt signal, e.g. comparison of sound localization performance for the original uncompressed sound and the celt sound (most probably for different bit rates). Best, Pablo -- Pablo F. Hoffmann PostDoc Acoustics Dept. of Electronic Systems Aalborg

Hi, I'm using windows xp and R 2.8.0 - I wonder what is the command to put in a script that has the same effect as when in a plot you choose menu "History" and "Recording". Best wishes Troels -- Troels Ring - - Department of nephrology - - Aalborg Hospital 9100 Aalborg, Denmark - - +45 99326629 - - tring at gvdnet.dk

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi In the Samba HOWTO (ch. 24 section 24.3.2) is written "When winbind is used, the default condition is that the local user george will be treated as the account DOMAIN\george and the foreign (non-member of the domain) account will be treated as MACHINE\george because each has a different SID." I have enable 'winbind use default

I have the following configuation. My storage: 12 luns from a Clariion 3x80. Each LUN is a whole 6 disk raid-6. My host: Sun t5240 with 32 hardware threads and 16gig of ram. My zpool: all 12 luns from the clariion in a simple pool My test data: A 1 gig backup file of a ufsdump from /opt on a machine with lots of mixed binary/text data. A 15gig file that is already tightly compressed. I wrote

That should say below, we are using Powerpath on the CX300's AND the CX600's... ----------------------------------------------------------------------- We are using Powerpath with CX300's and Emulex HBA's, also with OCFS on Red Hat 2.1 AS. Kernel upgrades are the biggest issue that we have, as some of the drivers are dependent on modules built for specific kernels, and if your

Dear friends. I have trobpe with path. Below I have tried to paste a path and file name but it will not work > path <- "D:/rw0641/own/own/procedures/GFR_TIME" > path [1] "D:/rw0641/own/own/procedures/GFR_TIME" > path1 <- paste(path,"gfr.txt",sep="/") > path1 [1] "D:/rw0641/own/own/procedures/GFR_TIME/gfr.txt" -- this is good