Displaying 20 results from an estimated 800 matches similar to: "[PATCH] Install VirtIO storage and network drivers in Windows"
2011 Jan 25
1
[PATCH] Fix a Windows conversion error when C:\Temp exists in the guest
We were unconditionally creating /temp/v2v in the guest, and later using
case_sensitive_path to look the path up again. If C:\Temp already existed, this
would lead to unpredictable results.
Fixes RHBZ#672521
---
lib/Sys/VirtV2V/Converter/Windows.pm | 21 ++++++++++++++-------
1 files changed, 14 insertions(+), 7 deletions(-)
diff --git a/lib/Sys/VirtV2V/Converter/Windows.pm
2010 Aug 16
2
[PATCH 1/2] Allow absolute paths in virt-v2v.conf
This patch allows paths in virt-v2v.conf to be either relative or absolute. If
relative, they are relative to software-root.
This allows virt-v2v.conf to use files provided by packages independent of
virt-v2v.
---
lib/Sys/VirtV2V/Config.pm | 10 ++++++----
1 files changed, 6 insertions(+), 4 deletions(-)
diff --git a/lib/Sys/VirtV2V/Config.pm b/lib/Sys/VirtV2V/Config.pm
index f703152..121e774
2010 May 26
1
[PATCH] Fix error in Converter::Windows when there is no transfer iso
The code for mounting the transfer iso in Converter::Windows didn't do the same
level of error checking as the same code in GuestOS::RedHat. This change moves
the GuestOS code into Config, and updates both GuestOS::RedHat and
Converter::Windows to use Config.
Fixes RHBZ#596091
---
lib/Sys/VirtV2V/Config.pm | 51 ++++++++++++++++++++++++
lib/Sys/VirtV2V/Converter/Windows.pm |
2014 Jan 03
1
[PATCH] virt-v2v: Default to non-virtio drivers if driver path is missing
During a Windows conversion, _prepare_virtio_drivers aborts the conversion
completely if the configured virtio driver path does not exist. If the path
exists but is empty, the conversion completes correctly by defaulting to the
non-virtio drivers. This patch treats a missing directory just like missing
drivers, by reporting a message, then defaulting to non-virtio drivers.
---
2010 May 06
1
[PATCH v2v] Pre-convert Windows guests.
This is my lightly tested patch which allows pre-conversion
of Windows guests.
You also need to supply rhsrvany.exe and firstboot scripts.
Rich.
--
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
virt-top is 'top' for virtual machines. Tiny program with many
powerful monitoring features, net stats, disk stats, logging, etc.
2011 Mar 11
2
[PATCH 1/2] Allow reading more data than the reported size of a volume
If a volume is not an exact multiple of 512 bytes, qemu-img will report its size
rounded down to a 512 byte boundary. However, when copying, the file is still
read until EOF, which will return more data than was expected. This change
prevents that causing a failure in itself.
The situation is still not resolved, however, as there are still situations
where this will cause a failure. For example,
2010 Feb 09
5
[PATCH 1/6] Convert config file to XML, and translate networks/bridge for all connections
Previously, only the LibVirtXML connection translated network and bridge names
in imported metadata. This change moves this functionality in Converter, making
it available to LibVirt connections as well.
At the same time, the format of the config file is switched to XML. The primary
driver for this is that the allowable syntax of a foreign network/bridge name is
not known. Rather than create a
2010 Aug 13
2
[PATCH] Add debug output to hivex_close
---
lib/hivex.c | 3 +++
1 files changed, 3 insertions(+), 0 deletions(-)
diff --git a/lib/hivex.c b/lib/hivex.c
index 13d7556..8a774de 100644
--- a/lib/hivex.c
+++ b/lib/hivex.c
@@ -543,6 +543,9 @@ hivex_close (hive_h *h)
free (h->filename);
free (h);
+ if (h->msglvl >= 1)
+ fprintf (stderr, "hivex_close\n");
+
return r;
}
--
1.7.2.1
2003 May 01
2
What' wrong?
I try to do single proportion test on my category data. Here is my R
script:
library("ctest")
catSignifTest <- function( catFile ) {
###############################################################
## Get the data sets from text file
catData <- read.table( catFile )
ncols <- length(catData)
nrows <- length(catData[,1])
ncol1 <- ncols - 1
probeNbr
2010 Feb 12
11
[PATCH 1/9] Convert config file to XML, and translate networks/bridge for all connections
Previously, only the LibVirtXML connection translated network and bridge names
in imported metadata. This change moves this functionality in Converter, making
it available to LibVirt connections as well.
At the same time, the format of the config file is switched to XML. The primary
driver for this is that the allowable syntax of a foreign network/bridge name is
not known. Rather than create a
2010 Apr 08
1
[PATCH] Move all interaction with the config file into Sys::VirtV2V::Config
This removes another chunk of functionality from GuestOS.
---
MANIFEST | 1 +
lib/Sys/VirtV2V/Config.pm | 339 +++++++++++++++++++++++++++++++++++++
lib/Sys/VirtV2V/Converter.pm | 56 +-----
lib/Sys/VirtV2V/GuestOS.pm | 94 ----------
lib/Sys/VirtV2V/GuestOS/RedHat.pm | 46 ++++--
v2v/virt-v2v.pl | 96 +----------
6 files
2010 Sep 13
3
[PATCH 1/4] Check that we're not overwriting an existing Libvirt domain
Exit with an error if we would overwrite an existing libvirt domain.
Fixes RHBZ#617110
---
lib/Sys/VirtV2V/Connection/LibVirt.pm | 4 ++++
lib/Sys/VirtV2V/Target/LibVirt.pm | 31 ++++++++++++++++++++++++++++++-
lib/Sys/VirtV2V/Target/RHEV.pm | 11 +++++++++++
3 files changed, 45 insertions(+), 1 deletions(-)
diff --git a/lib/Sys/VirtV2V/Connection/LibVirt.pm
2010 Mar 30
3
[PATCH 1/2] Refactor guest and volume creation into Sys::VirtV2V::Target::LibVirt
Move all target-specific functionality into its own module in preparation for
output to RHEV.
---
MANIFEST | 1 +
lib/Sys/VirtV2V/Connection.pm | 46 ++---
lib/Sys/VirtV2V/Converter.pm | 138 +------------
lib/Sys/VirtV2V/Target/LibVirt.pm | 419 +++++++++++++++++++++++++++++++++++++
lib/Sys/VirtV2V/Transfer/ESX.pm | 91 +++------
po/POTFILES.in
2011 Jan 17
1
[PATCH] Fix subclassing of LibVirtXMLSource
LibVirtXMLSource was subclassing an invalid class, and consequently didn't have
copy_storage defined.
Fixes RHBZ#670175
---
lib/Sys/VirtV2V/Connection/LibVirtXMLSource.pm | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/lib/Sys/VirtV2V/Connection/LibVirtXMLSource.pm b/lib/Sys/VirtV2V/Connection/LibVirtXMLSource.pm
index e62d996..ffb9309 100644
---
2010 Jun 18
1
[PATCH] Improve error message when LibvirtXML is given invalid domain XML
If a user accidentally passed a valid XML document to the LibvirtXML which
wasn't actually a libvirt domain XML document, they would end up getting obtuse
errors from a libguestfs library. This change does 2 sanity checks:
1. After parsing a the XML document, check /domain/name exists.
2. Check that the domain defines some storage
The second check is generally useful, as we can't
2010 Apr 22
2
[PATCH 1/2] Try to load the loop module before running mkinitrd
mkinitrd needs to mount files using loop. loop might be a module, so try to load
it first.
---
lib/Sys/VirtV2V/GuestOS/RedHat.pm | 7 +++++++
1 files changed, 7 insertions(+), 0 deletions(-)
diff --git a/lib/Sys/VirtV2V/GuestOS/RedHat.pm b/lib/Sys/VirtV2V/GuestOS/RedHat.pm
index 0e469f5..08027b6 100644
--- a/lib/Sys/VirtV2V/GuestOS/RedHat.pm
+++ b/lib/Sys/VirtV2V/GuestOS/RedHat.pm
@@ -1114,6
2010 Jun 09
1
[PATCH] RHEV: Fix generation of OVF file
From: Qixiang Wan <qwan at redhat.com>
Commit 0973765674abd773ad04a99ddfdff8e81693e1ff introduced a regression which
caused the OVF file not to be generated when outputting to RHEV.
Fixes RHBZ#602067
---
lib/Sys/VirtV2V/Target/RHEV.pm | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/lib/Sys/VirtV2V/Target/RHEV.pm b/lib/Sys/VirtV2V/Target/RHEV.pm
index
2010 Apr 07
2
[PATCH] Target::LibVirt: Don't truncate a volume when opening it
perl's '>' open mode truncates by default, and will create a new file if
necessary. We don't want to truncate an existing volume when writing to it, and
it's an error if the volume doesn't already exist. Use sysopen to be explicit
about this.
---
lib/Sys/VirtV2V/Target/LibVirt.pm | 6 +++++-
1 files changed, 5 insertions(+), 1 deletions(-)
diff --git
2010 Mar 31
1
[PATCH] Add LocalCopy transfer method to transfer local files to a target
Also changes command line parsing to require a pool to be specified when using
libvirt output, meaning storage will always be copied.
---
MANIFEST | 1 +
lib/Sys/VirtV2V/Connection.pm | 74 +++++++++---------
lib/Sys/VirtV2V/Connection/LibVirt.pm | 18 +++--
lib/Sys/VirtV2V/Connection/LibVirtXML.pm | 11 ++-
lib/Sys/VirtV2V/Target/LibVirt.pm
2010 Mar 08
1
[PATCH] ExecHelper: Use tmpfile() instead of File::Temp->new()
Building on EL-5 fails when the result of File::Temp->new() is passed to
open3(). tmpfile() works consistently.
---
lib/Sys/VirtV2V/ExecHelper.pm | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/lib/Sys/VirtV2V/ExecHelper.pm b/lib/Sys/VirtV2V/ExecHelper.pm
index 110ae9f..f577ff6 100644
--- a/lib/Sys/VirtV2V/ExecHelper.pm
+++ b/lib/Sys/VirtV2V/ExecHelper.pm
@@ -20,7