similar to: wow.exe Wont Run in Wine 1.2.1

Dear List, After some googling around without any results, I'm quite puzzled. Since some past update I can't precise, kernel 2.6.164 works fine, however 2.6.194 has some sound problem in my somewhat old and beaten Toshiba laptop. -Audacious plays OK but other applications have problems. -For instance, mplayer acts quirky: when I pause a playing video, sound keeps stuttering endlessly. The

CentOS 4.3 (fully updated, including CentOS Plus kernel). Running KDE 3.5.2 (fully updated from redhat.kde repo). I can't seem to get the OS to recognize my SD card when inserted into my USB card reader. Mepis 6 Beta 3 has no problem with it. DMESG sees nothing happening when the card is inserted. USB-STORAGE module is loaded.

Hi All, can anybody tell me what has changed in this new kernel release that is getting most of us stucked ? I have an Intel HDA Audio device and an Intel 2200 wireless in my laptop and both stopped working with this new kernel. Both audio and wireless device seems to be ok but there's no sound from the intel hda and the wireless find AP's but doesn't connect. below is the lspci

Hello Am Friday 11 December 2015, 10:13:00 schrieb Gordon Messmer: > On 12/11/2015 06:04 AM, G?nther J. Niederwimmer wrote: > > I have 4 NIC on all my KVM Servers but the most time on a start (restart) > > I > > lost one NIC? It is not always the same, but this two are virtio NICs. > > > > with ifup eth0(1) the system say,I have no configured eth0 or eth1 file ?

Hello, I'm currently try to get newhidups running with the newhidups driver from nut 2.0.2. After some USB issues (usb_claim_interface() works only as root so far) newhidups is recognizing the device. Though it doesn't detect any state changes, meaning when I run the battery test mode it's not recognized. I wanted to try the CVS version but it seems anonymous CVS is broken. The

Is the Intel High DefiNition Audio (82801FB/FR/FW/FRW) card supported? -- Best regards, Chris Writings prepared without understanding must fail in the first objective of communication -- informing the uninformed.

I get this error: ============================================================================= KLIBCCC usr/kinit/resume.o usr/kinit/resume.c:15:66: linux/config.h: No such file or directory make[2]: *** [usr/kinit/resume.o] Error 1 make[1]: *** [all] Error 2 make: *** [klibc] Error 2 ============================================================================= There is no linux/config.h in

Hello, Let us convert a vector to a time series object starting in 1978Q1: FRW<-ts(FRW0, frequency=4, start=c(1978,1)) FRW[3:6] represents the data from 1978Q3 to 1979Q2. Could we access the data by the time (1978Q3 to 1979Q2) instead of FRW[3:6]? Thanks, miao [[alternative HTML version deleted]]

Hello, I have an issue with my XEN system. I suspect that it might be a bug, but I''m no linux expert, so I don''t know. Here is my problem: I have an ASUS P7P55D-E Premium motherboard, and a Western Digital Caviar Black SATA-III 1TB hdd. I am trying to use AHCI. The dom0 is an Arch Linux. The dom0 boots fine until Intel VT-d is enabled in the BIOS. When I enable it Arch

Hi, I've been playing with a TE120P on Asterisk 1.4.18 with zaptel 1.4.9 and I've ran into an issue. After a call placed any DTMF tone causes the server to lock up entirely. Calls placed work just fine (except for a problem with echo cancellation). The phone registered to the server is a Linksys SPA-942. I am seeing in zttool some IRQ misses, but it never seems to go above 74 (below).

https://bugs.freedesktop.org/show_bug.cgi?id=42672 Bug #: 42672 Summary: NMI SERR with 2 Geforce 310 cards Classification: Unclassified Product: xorg Version: 7.7 (2011) Platform: x86-64 (AMD64) OS/Version: Linux (All) Status: NEW Severity: normal Priority: medium Component: Driver/nouveau

I have just bought a 120GB external usb drive but after plugging it in it is not getting mounted. lines from /var/log/messages: > Oct 22 18:54:49 station2 kernel: usb 1-2: new high speed USB device using ehci_hcd and address 2 > Oct 22 18:54:49 station2 kernel: usb 1-2: configuration #1 chosen from 1 choice > Oct 22 18:54:49 station2 kernel: scsi4 : SCSI emulation for USB Mass Storage

Hello List, I'm hoping someone else out there has an Asus DSBF-DE server board, and can tell me if anything special needs to be done to get ports 5 and 6 of the onboard SATA to work under Centos 5.1 x64. I have drives on 1 through 4 that are detected and working properly, however, a drive on 5 is not detected, from what i can tell, the kernel doesn't even see phy's for ports 5 and 6.

hi all . i am facing a issue with centos recently : after every boot i receive the following message in terminal : > Sep 19 13:13:02 station2 kernel: irq 50: nobody cared (try booting with the "irqpoll" option) > Sep 19 13:13:02 station2 kernel: [<c044e6fa>] __report_bad_irq +0x2b/0x69 > Sep 19 13:13:02 station2 kernel: [<c044e8e7>] note_interrupt +0x1af/0x1e8

Trying to run WoW & SC2 same error on all. In WoW config.wtf I added SET gxAPI "OpenGL" glxinfo | grep rendering direct rendering: Yes fglrxinfo display: :0.0 screen: 0 OpenGL vendor string: ATI Technologies Inc. OpenGL renderer string: ATI Radeon HD 5700 Series OpenGL version string: 4.0.10188 Compatibility Profile Context wine --version wine-1.2 Pop up error when trying to

I have a user who wants to have 4 monitors attached to his CentOS 6.4 system. I know that you can't use both on-board video and a PCI video card at the same time, but what about two PCI video cards? The system seems to recognize them as shown by the lspci -v output below, but I can't get Xorg to use the second card. Has anyone done this? If so, what is the trick to get it to work?

Hi, I am trying to VGA passthrough Intel HD Graphics 4600 IGD with Xen-unstable 4.4 changeset 27214 and Linux kernel 3.10.0 but was not successful. Details are as follows: =============================================================================================== teo-en-ming@intel-core-i5-4430-desktop:~$ sudo xl info [sudo] password for teo-en-ming: host :

Hi, I'm trying to install a Junghanns quadbri for a few days but i stay with an asterisk error. (Everyone is busy/congested ) Asterisk is working with a Fritz PCbut from one year and now i want to add the quadbri. The quadbri card has been configured in NT mode and with no 100 ohms S/T termoination. (I'm not sure if the S/T parameter is correct) I have installed the bristuff package

+cc: ocfs2-devel, sunil Marek, Thanks for the detailed report! Can I trouble you to file a bug at http://oss.oracle.com/bugzilla ... oh, is that your report http://oss.oracle.com/bugzilla/show_bug.cgi?id=1339? This looks like a deadlock of some sort. I don't think your hardware configuration really matters here. We'll keep looking into it. Joel On Tue, Dec 20, 2011 at 08:22:48AM

While doing this on an 80gig ibm ide drive: dd if=/dev/cdrom of=cd.iso I got the following assertian failure Aug 9 14:43:27 budder kernel: Assertion failure in __journal_remove_journal_head() at journal.c:1733: "jh2bh(jh) == bh" Aug 9 14:43:27 budder kernel: kernel BUG at journal.c:1733! Aug 9 14:43:27 budder kernel: invalid operand: 0000 Aug 9 14:43:27 budder kernel: CPU: 0 Aug 9