similar to: Getting EPROM programmer software to work under Wine

I am sure Primus has a SIP platform because we have played with it. We managed to use it on MSN's SIP phone as well as couple Zultys ZIP2x2 hard phones. Their PC-Phone app is also a SIP soft phone. If you are registering to sip.iprimus.net then it is definitely their SIP platyform not MGCP. David >>> asterisk-users@eol.ca 1/21/2004 6:39:34 AM >>> I'm not sure Primus

Hi, We are using Vicidial and sometime even when agent disconnects, outgoing call originated by dialer is still active. Since call was initiated by dialer and then bought into meetme conference of agent and we can't corelate this call to any agent channel. When agents are dialing, channels doesn't show calls vicidial2*CLI> show channels Channel Location

If you look at the specs on the Dlink box that Primus gives you, you will see that it is SIP. I am sure Primus has a SIP platform because we have played with it. We managed to use it on MSN's SIP phone as well as couple Zultys ZIP2x2 hard phones. Their PC-Phone app is also a SIP soft phone. If you are registering to sip.iprimus.net then it is definitely their SIP platyform not MGCP.

Hey, I've checked all over and can't find what I need to know, so I'm posting here. I want to use Asterisk with my Primus VoIP service but it seems I need a username and password to authenticate with at Primus. Has anyone had any experience with this? How did you get it? Is it stored somewhere in the D-Link gateway they gave me? Thanks in advance and sorry if this makes no sense.

I am trying to install Rome: Total War (which should work fine it has golden mark on WineHQ) But when it starts to prepare for installation i get error 1603 and says that i have to consult windows installer helper or MSDN. I had similar problem before but then it was because I wanted to instal on unmounted drive noe this is not the case, so I really don't know how to resolve this.

Primus in Canada has launched a SIP-based service to replace your business and residential POTS lines with a VoIP version. It's called TalkBroadband and it looks killer: http://www.primus.ca/en/residential/talkbroadband/index.html Basic service for $20 Cdn a month!! Local number portability!! Cheapo Primus LD rates!! They don't care where geographically you plug it in!! When you sign

Hi all, A while back, there was a short thread on using the FXS interface from a Primus TalkBroadBand device (a DLink ATA) as a incoming line for the FXO interface on the TDM400P: Primus <--> DLink ATA FXS <--> TDM400P FXO <--> Asterisk In that thread, a couple of people suggested that this does not work reliabley, and the ATA FXS <--> TDM FXO link 'goes

Hi list, For a client I am setting up a system which will use T1 PRI from Primus, who offer only NI-1 and NI-2 protocols for D-Channels. Previousely I have only used switchtypes euroISDN and National. Although the documentation says Asterisk does support NI-1 ans NI-2, but wanted to get your opinion if you have used these protocols on an Asterisk box and if there were any things to consider. If

Hi, I'm having a very weird problem with CentOS as a VirtualBox guest. Let me explain it step by step. tl;dr: I can install VirtualBox Guest Additions and configure a fullscreen 1280x1024 graphical resolution on a full install, but not on a reduced install with a lightweight window manager. Here's what I did. 1. Install vanilla CentOS 7 with KDE. 2. Boot to reduced 1024x768

Hi All, Any recommendation for a Network Browser for KDE/GNOME/WindowMaker?? Cheers, Mun Heng, Ow H/M Engineering Western Digital M'sia DID : 03-7870 5168

All, I have been thru the archives and all the relevant URL's sent to me. I have sent e-mail to those who have gone before me and are attempting to accomplish the same goal - no one has it working?. Doesn't anyone have a WORKING asterisk pbx that hooks into vonage? Thanks, Jerry Roy 562-305-9545 -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi all, I am using wine from SuSe 7.3 Pro on Windomaker to run my Lotus Notes under Linux. My Question: How can I still use my windowmaker-shortcuts to switch to the next workspace (Ctrl-Alt-Right/Left) while running Wine .... Wine does not give me the possibility while running the windows application (Lotus Notes) to accept this shortcut for Windowmaker ... is there a chance to change or

Greetings from Brazil, I installed winbind and everything seems good, but i have kde installed and i'm trying to run windowmaker.. if i choose 'failsafe' or log into the black terminal it runs ok.. but when i try to log into the windowmaker.. it does not log in... what should i do ? other question.. is there a way to log with the local accounts when winbind is runnning ? i can only

Greetings from Brazil, 1) I installed winbind and everything seems good, but i have kde installed and i'm trying to run windowmaker.. if i choose 'failsafe' or log into the black terminal it runs ok.. but when i try to log into the windowmaker.. it does not log in... what should i do ? 2) how can i login with the local accounts (root and others) while winbind is running ? i can only

I know there is whole page about Installshield, but I'm of a slow nature so I don't really know what to do when i get error: 1607 Instalshield scripting runtime Please explain in plain english Thanks

Hi, I just had the weirdest of system crashed. Here goes. I wanted to install a desktop step by step, as I usually do. First the base system, then the X Window System, then the WindowMaker window manager. Everything went OK, then I installed kmod-nvidia from ELRepo. Yum informed me that the driver conflicted with x11-glamor (something like that), so I removed the corresponding package.

Mon Dec 25 20:19:05 GMT 2000 Greetings. I noticed that in OpenSSH_2.2.0, DSA keys were allowed to be added to ssh-agent, however the ability for allowing ForwardAgent does not yet seem in place for protocol-2. I've noticed that when using protocol-2, no socket is created in /tmp/ssh-*/, and consequently SSH_AUTH_SOCK is not being set. Hence the ability to ssh to another machine (using

On Wed, Jul 23, 2014 at 10:32 AM, Clemens Eisserer <linuxhippy at gmail.com> wrote: > Hi again, > >> On my NV18 based laptop I experience artifacts related to text >> (however, 2D performance is really great these days): >> - With grayscale AA text is sometimes missing, often visible on the XFCE desktop >> - With subpixel (rgb) AA, even non-text related occur

Hello! I built wine-20050211 from source. I use www.x.org 6.8.2 which was built from source, too. I built program my.exe in WIN98 SE. If I type "wine my.exe &", my.exe doesn't show up at all although I see the following 2 processes are running: wine-preloader wine-kthread my.exe wineserver My.exe doesn't show up either if I run it foreground. I then hit CTRL-C. Now a

hi, I saw that Mike Dransfield tried to port 'state' plugin from beryl. What does it do? It should be able to place windows, based on name, class etc., to specific viewports. I recently converted to compiz window manager from WindowMaker (used it for 8 years), and I miss automatic 'pinning' of specific windows to particular workspace (or viewport in this case). Mike's