similar to: Having trouble as a new linux user

Hi, I''m pretty new to WxRuby, but I think it is the ideal solution to write Ruby-applications for different platforms. I missed the wxHtmlWindow in WxRuby, so I added it myself. You can grab the new files from http://portfolio16.de/tmp/wxruby-html.tar.gz. This archive contains all files I added to the wxruby-directory. These are mostly the *.t files for the missing classes and some

Can't anyone stop self-promotion and tell the poor guy what he needs. A T1/E1 X-over cable using an RJ-45 (8-cond.) is pinned out as follows: 1 - 4 2 - 5 3 - NU 4 - 1 5 - 2 6 - NU 7 - NU 8 - NU NU = Not Used I have not in my experience seen any problems with using a Good Quality Cat5 vs. Cat 3 (telco standard) cable for X-connects. YMMV, but you should be fine. As far as the shielding

I have to load 10 different data frames and then manipulate those 10 data frames but would like to do this in a more simplified code than what i am doing. I have tried a couple of approaches but cannot get it to work correctly. So the initial (bulky) code is: #Bin 1 #------- #Loads bin data frame from csv files with acres and TAZ data Bin1_main <-

Dear all, Given data of a continuous frequency distribution with class intervals .. how to enter such data so that we can use the normal mean, median and mode functions to calculate them and also can draw histogram .. for example how to enter this data in R Height range[image: ↓]<http://en.wikipedia.org/wiki/Frequency_distribution#> Number of students[image: ↓]

I have a box with 12 T1s (4 Te410P cards). The PSTN provider is reporting slips and ask me to update the clock source. I have my system.conf set as the following but when I run dahdi_scan only the ports on Card 1 are showing up with syncsrc=1 system.conf : span=1,1,0,esf,b8zs bchan=2-24 mtp2=1 span=2,2,0,esf,b8zs bchan=26-48 mtp2=25 span=3,3,0,esf,b8zs bchan=49-72

Hi, I have 2 servers: one is running 2 B410P cards with 8 euroisdn lines (mISDN) connected on it, everything runs fine. I prepare a new server - HP 360 G8- with 2 HA8 cards each of them 1 module of 4 lines. Already had with this machine an RMA on both cards as they was faulty and crashed the server. What happends is that when I connect cables on the HA8 modules (those cables are unpluged

Hi all, anyone could pls explain me what does it means ? It a part of zaptel.conf file. LBO= Line Build Out 0: 0 dB (CSU) / 0 - 133 feet (DSX-1) 1: 133 - 266 feet (DSX-1) 2: 266 - 299 feet (DSX-1) 3: 399 - 533 feet (DSX-1) 4: 533 - 655 feet (DSX-1) 5: -7.5 dB (CSU) 6: -15 dB (CSU) 7: -22.5 dB (CSU) Thanks Giordano -- No virus found in this outgoing message. Checked by AVG

Dear R-ers, I am a gratuate student from South China University of Technology. I fond the function 'sprintf' in R2.10.1 have a little bug(?): When you type in the example codes: > sprintf("%s is %f feet tall\n", "Sven", 7.1) and R returns: [1] "Sven is 7.100000 feet tall\n" this is very different from the 'sprintf' function in C/C++, for in

Hello! I am trying to set up multi-link PPP using two T100P cards in one machine, and 1 T405P card (the 4-port one) in another machine. I have previously been able to get PPP working between the two T100P cards in separate machines.... The 4-port card seems to be my problem currently. I am trying to use the tor2 driver (from a fresh CVS download this morning). When I load the driver (or run

I installed the QuadBri card in my * server. I'm installing * on a RedHat 9 server I run the install.sh file. So far no problems. If I try to start /sbin/ztcfg -v -c /etc/zaptel.conf I will see the following error: Zaptel Configuration ====================== SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1) SPAN 2: CCS/ AMI Build-out: 399-533 feet (DSX-1) SPAN 3: CCS/ AMI Build-out:

Can someone who is knowledgable in the traditional telco space please give me a layman's explanation (or point me to an appropriate url) of LBO as per the zaptel configuration file? # The line build-out (or LBO) is an integer, from the following table: # 0: 0 db (CSU) / 0-133 feet (DSX-1) # 1: 133-266 feet (DSX-1) # 2: 266-399 feet (DSX-1) # 3: 399-533 feet (DSX-1) # 4: 533-655 feet (DSX-1)

Hello, Getting this error on dahdi_cfg. Reverting to 2.8 the error goes away: *line 15: Unable to create 'dahdi_cfg' mutex.* Is this a problem? Thanks in advance. Full detail: [ebox]> dahdi_cfg -vvvvvvv DAHDI Tools Version - 2.9.0.1 DAHDI Version: 2.9.0 Echo Canceller(s): HWEC Configuration ====================== SPAN 1: CCS/ AMI Build-out: 0 db (CSU)/0-133 feet (DSX-1) SPAN 2:

Hi, 1. Is there any manual entry about modprobe's options relative to a given Dahdi driver (wctdm24xxp, for instance) ? 2. When loading a wctdm24xxp driver, is there any parameter to pass to modprobe to configure a span in NT/point to point mode ? 3. After running dahdi_cfg -vvvvv , I can read with dmesg : [ 1986.289277] wctdm24xxp 0000:04:06.0: xhfc: Configuring port 0 span 1 in TE mode

- I'm not a Linux user i'm trying to get in it ... - Fedora core 1 - QuadBRI card bought from junghanns.net - We want to use the card in TE mode to connect to the TELCO - Downloaded BRISTUFF0.0.2(stable) latest from junghanss.net/asterisk - followed the instructions on voip-info.org - compiled everything still got the error when "make load" in qozap : insmod ./qozap.o

Hi all, We need help with our SuSe9.2 asterisk box We have one QuadBRI and one TDM40B in an ASUS pundit R-2 barebone. We have downloaded the bristuff (0.2.0-RC7j) and installed it without problems. once we downloaded and compiled asterisk, zaptel and all other stuff, the module installation succed in this order: modprobe zaptel modprobe qozap modprobe wcfsx then the ztcfg output this: Zaptel

Hi, On a (bogus) system equiped with a Digium HA8 and 8 BRI ports, I'm reading this: # asterisk -rx "dahdi show status" Description Alarms IRQ bpviol CRC4 Fra Codi Options LBO HA8-0000 RED 109 0 0 CCS AMI YEL 0 db (CSU)/0-133 feet (DSX-1) HA8-0000 UNCONFI 109 0

Hi All, I'm a newbie and have two questions. Please pardon me if they are very basic. 1. I'm using a regression tree to predict the selling prices of 10 new records (homes). The following code is resulting in an error message: pred <- predict(model, newdata = outOfSample[, -6]) The error message is: Error in model.frame.default(Terms, newdata, na.action = na.action, xlev =

Hi List, I'm setting up a system with one TDM400P (2*FXO + 2 * FXS) and one Junghanns QuadBRI on a Fedora Core 6 (Kernel 2.6.20-1.2944.fc6). I'm using the bristuff-0.3.0-PRE-1y-e kit. It download zaptel-1.2.16, libpri-1.2.4 and asterisk-1.2.17 When it's the time for ztcfg to do its job it complains with <ZT_SPANCONFIG failed on span 2: No such device or address (6)>

Hi all, i am stuck with the configuration of asterisk - modules are loaded ( zaptel and wct4xxp ) - i have zaptel.conf configure, output of ztcfg -vv --- snip -- rapid:~# ztcfg -vv Zaptel Configuration ====================== SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1) SPAN 2: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1) SPAN 3: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet

Hi everyone. We have a problem here... Hope somebody can give us some hints. We have a HP ProLiant DL180 G6 Server with a Debian/Lenny sytem. Asterisk 1.4.21.2 (1.4.21.2~dfsg-3+lenny1) with zaptel (1.4.11) and libpri (1.4.3) is installed. There is a QuadBRI-Card installed: # lspci -vv -s 06:04.0 06:04.0 ISDN controller: Cologne Chip Designs GmbH ISDN network Controller [HFC-4S] (rev 01)