similar to: using NUT on centos 5

Hi I'm hoping someone can help. I'm running fc5 with nut 2.0.3. I just recently acquired 2 Gamatronic SmartCompact ups for my Linux boxes. As you can see from the info below, everything looks ok. When I unplug the ups from the wall, after a while, the computer shutdowns very rudely. That it is just turns off. No scrolling down of processes shutting down It does not seem shutdown

rPi3 running current Buster.  I get this far: # upsc networkups Init SSL without certificate database battery.charge: 100 battery.charge.warning: 30 battery.runtime: 2891 battery.type: PbAC device.mfr: Vertiv Co device.model: Liebert PST5 device.type: ups driver.name: usbhid-ups driver.parameter.pollfreq: 30 driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.parameter.productid:

Nice! it seems to works. Later this evening when I'll be back to my home I'll try to unplug the power chord from my ups. Apr 3 14:08:11 archivio notifier: nut not running? (check > /var/db/nut/upsd.pid). > Apr 3 14:08:11 archivio notifier: nut_upsmon not running? (check > /var/db/nut/upsmon.pid). > Apr 3 14:08:11 archivio notifier: nut_upslog not running? (check >

Hello! After I type "upsmon", in syslog the following message appears: Aug 16 14:11:09 marto upsmon[7731]: Master privileges unavailable on UPS [Inform@localhost] Aug 16 14:11:09 marto upsmon[7731]: Reason: Access denied Can you tell me where my error is, my configuration files are: ups.conf: [Inform] driver = powercom port = /dev/ttyS0 desc = "inform guard" linevoltage = 220

An HTML attachment was scrubbed... URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20120104/34be491b/attachment.html>

Hello, I need help configuring my USB connected UPS "Emerson Power Liebert PowerSure PSI 1440" to my freebsd machine, using NUT. here's the manufacturer's product page http://www.emersonnetworkpower.com/en-US/Products/ACPower/Pages/LiebertPowerSurePSILineInteractiveUPS10003000VA.aspx I'm not a BSD expert, so please ask me for any information you need. regards Daniele

On Nov 9, 2014, at 7:56 PM, Steve Read <sd_read at hotmail.com> wrote: > Boy, I guess I got that one wrong. > > When I run nmap on the master it does say that port 3493 is open which is expected. > > So then what you are telling me means the ports are open. > In other words I don't have a firewall issue. I know this sounds incredibly pedantic, but if you run nmap

Apologies for resurrecting an old thread and likely poor formatting - I wasn't subscribed to the list at the time and have copied it out of the archives (http://lists.alioth.debian.org/pipermail/nut-upsuser/2010-July/006104.html). I've been unable to locate any further progress on this UPS (Liebert 10af:0001) - a thread from 2009

I have only RS-232 on the box (meanwhile, it was manufactured on march of 2011) Here is my configs: nut.conf: * * MODE = netserver ups.conf: * * [KIN1500] driver = powercom port = notUsed desc = "Powercom KING PRO KIN-1500AP RM" upsd.conf: * * LISTEN 192.168.1.2 3493 upsd.users: * * [monuser] password = xxxxxxxx upsmon master

I recently bought a new UPS, and I''m attempting to use nut to monitor it. Following setup instructions everything seemed to go well until it came to testing the connection, which failed. There is just one serial connector on the computer, so I set it to monitor /dev/ttyS0. Either that is wrong, or communication is failing. I''ve been told to try minicom to monitor it,

Hello, we have a Emerson Liebert GXT4, that we like to connect to our servers to shut them down if there is a power failure (which happens quite often in our area). I couldn't get the GXT4 working with usbhid-ups driver. So I need some advise to continue to get this device working. The GXT3 seems to be working ok with NUT (http://networkupstools.org/ddl/Liebert/GXT3.html). Here is my

I see there has been some Liebert work here recently. I have a Liebert UPS that has no USB, just RS-232. I reverse engineered the ESP-II protocol, at least as far as normal MultiLink monitoring goes, which was pretty simple. The protocol provides a table of parameter types and index ranges. So, I can read and (if I dare) write the parameter tables. We might be able to share info between

please reply to the list. thanks! See below. On Apr 3, 2014, at 3:10 AM, Daniele Borghesi wrote: > thanks for your reply. I'm running the latest version of FreeNAS based on 9.2 with NUT 2.7.1 > > [root at archivio ~]# uname -a > FreeBSD archivio.dannyb78.home 9.2-RELEASE-p3 FreeBSD 9.2-RELEASE-p3 #0 r262572+ > 38751c8: Thu

Hi, I have a Liebert GXT2-1000RT230 UPS that is connected to my server using a serial cable. I have no idea to what port exactly it is connected so my first question is: how do I find out what /dev/tty** should I use? Do I need to install a device driver for it? Where do I find it? What should I use and how do I do so the server shuts down if the battery level is low? Yes, I'm a newby,

Hi, I've been setting up a few Eatons 1500 USB in master/slave mode and run into what I'm thinking is a hostname resolution problem. Basically, to avoid hardcoding ips, I'd love to be able to add a LISTEN on the lan's ip which has hostname, let's say, server1.local . If I set up upsd.conf such as LISTEN server1.local 3493 what I end up with is upsd listening on 127.0.0.1 .

Problems getting reading from UPS with nut 2.0.2 Debian Sid I know that the server starts running and accepts incoming connections, it can verify the username and password but refutes that the UPS lives at localhost, what am I doing wrong ? I have read and reread both the official documentation and various guides around the net I am unsure where to go now. If the UPS itself is at fault (not

I have a Dell PE 2850 connected via 940-0024C cable to serial port on the UPS mentioned above. I've used apt-get to install nut-2.0.2-3 and attempted to configure based on the documentation. So far I'm getting the following when I try to start ups daemon: server:/etc/ups # /etc/init.d/ups start Starting service NUT: -> Starting UPS driver: Network UPS Tools - UPS driver controller

Hello. I have Liebert GXT3 UPS connected to CentOS Linux with kernel 2.6.32-131.0.15.el6.x86_64 and nut version 2.6.5-2. lsusb: Bus 002 Device 003: ID 10af:0000 Liebert Corp. UPS And this UPS detected only with this section in ups.conf: [liebert] driver = liebert port = /dev/ttyS0 but only this variables available: device.mfr: Liebert device.model: MultiLink device.type: ups

Hello. I've tried to configure Windows (complete port, Beta): Windows MSI installer 2.6.0-1 with my Powerware 5115 connected via USB port but have no luck. Here is my config files: *nut.conf:* MODE = netserver *ups.conf:* [PW5115] driver = bcmxcp_usb port = notUsed desc = "PowerWare 5115" *upsd.conf:* LISTEN 192.168.1.12 3493 *upsd.users:* [monuser]