Displaying 20 results from an estimated 600 matches similar to: "install on raid1"
2010 May 28
2
permanently add md device
Hi All
Currently i'm setting up a 5.4 server and try to create a 3rd raid device, when i run:
$mdadm --create /dev/md2 -v --raid-devices=15 --chunk=32 --level=raid6 /dev/sdc /dev/sdd /dev/sde /dev/sdf /dev/sdg /dev/sdh /dev/sdi /dev/sdj /dev/sdk /dev/sdl /dev/sdm /dev/sdn /dev/sdo /dev/sdp /dev/sdq
the device file "md2" is created and the raid is being configured. but somehow
2011 Mar 07
2
connection speeds between nodes
Hi All,
I've been asked to setup a 3d renderfarm at our office , at the start it
will contain about 8 nodes but it should be build at growth. now the
setup i had in mind is as following:
All the data is already stored on a StorNext SAN filesystem (quantum )
this should be mounted on a centos server trough fiber optics , which
in its turn shares the FS over NFS to all the rendernodes
2011 Oct 26
4
openldap missing modules
Hi List,
I'm currently setting up an openldap server and included the following
lines in my slapd.conf :
modulepath /usr/lib/ldap
moduleload back_hdb
after finishing up my config and i run slaptest on it i get an error
saying that the modulepath doesn't exist.
I checked and it indeed isn't there , in fact i can find it anywhere on my
system (centos 5.7).
the packages i've
2011 May 16
1
bond empty after reboot
Hi all,
I've setup a ethernet bond on my centos 5.6 server , when i do a reboot
the bond does come up but cleared all the slaves
and i've to manually re-add them with ifenslave.
does anyone know a solution to this? am i missing something? offcourse i
can add it to my rc.local but there must be a more elegant way. please
see my configs below
Thanks,
Wessel
ifcfg-bond0:
DEVICE=bond0
2005 Mar 27
3
How to park/transfer a call received from a Queue?
Hi!
I'm trying to transfer a incomming call from a Queue to another extension.
I'm receiving a call from a queue with the AgentCallbackLogin.
The queu is as following:
Queue(sales|t)
Which should allow transfers.
So as soon as the call is answered I would like to be able to transfer it
When the agent presses the # I get the dialtone but as soon as I press any
digit Asterisk tells me
2005 Jan 28
5
Eyebeam - asterisk - Messenger
Hi all,
I would like to connect in sip mode an Eyebeam client to a messenger via
Asterisk.
I want to use video.
Nat is not an issue as vpn connections will be used.
Is this a difficult tasks, can someone give me some pointers to get
started...
Have a good week-end,
Francois
Random Thought:
---------------
Wanna buy a duck?
2012 Mar 07
2
hfs with extended attribute support
Hi all,
I?ve got a HFS+(not journaled) volume connected to my centos6.2 test
server, i installed the kmod-hfs(plus) packages and read/write works all
fine.
but since i?m going to use this for serving mac home folders via
netatalk i would like to mount it with support for Extended Attributes
and acl?s.
so i add user_xattr and acl to my fstab options but then it fails to mount.
checking the
2002 Oct 15
2
extremely dense tinc-mini-howto
Hi,
I'm trying to write an extremely dense tinc-mini-howto.
You can see it at:
http://keetweej.vanheusden.com/~folkert/tinc_mini_howto.html
Please send me suggestions on how I can make things better
and such.
Oh, and if someone could tell me how to configure tinc so
that it authenticates against the host on the other side,
please tell me! (couldn't figure that one out)
Folkert.
Tinc:
2000 Oct 17
2
setup problems
Hi,
Although Im dutch too, Ill write this in english. I got a similar problem
then the one on the helpforum. Ill paste my setup first
server tincd.conf
----
ListenPort = 8089
MyOwnVPNIP = 192.168.100.1/24
#VpnMask = 255.255.255.0
TapDevice = /dev/tap0
Passphrases=/usr/local/etc/tinc/passphrases
server tapdev
----
tap0 Link encap:Ethernet HWaddr FE:FD:C0:A8:6F:01
inet
2012 Jul 15
3
expire-tool stops on first box with nothing to expire in it
Hi,
I'm running dovecot 1.2.11 on Centos and have the expire plugin enabled.
I've had this in place for some time but until now never actually ran
the expire-tool. I'm now trying to put this to use.
The expire plugin as such is working fine and also the tool is working
fine - up to a point.
When I run it with --test it goes through a bunch of boxes and lists the
messages it
2010 Aug 26
1
[Bug]: Extlinux needs 1 minute before boot menu is shown
Hello,
when I try to boot from my computer extlinux needs about one minute before the
boot menu is shown. Here's my system configuration
-Two IDE drives on one controller
-Second hdd is boot hdd
-I'm using Arch Linux (i686)
Is there an official bug tracker which I can use? I only found the debian bug
tracker and I can't find any information about bugs on the homepage.
Here is my
2012 May 23
1
openldap mmr + heartbeat hot standby
Hi List,
I've setup 2 openldap servers in n-way multimaster replication mode in a
test environment, both run centos 6.2,
this works well but now i'm trying to make these 2 servers failover
using heartbeat.
i've got no experience with heartbeat (or setting up clusters in
general) however from what i understand heartbeat starts/stops the
service if the server has the virtual IP
2007 Jan 31
1
Estimation of discrete unimodal density
Dear All,
A method for the estimation is univariate unimodal densities (with unknown
mode) is described in "Statistical Inference under Order Restrictions" by
Barlow et al.. Would anyone know whether there is an R-implementation
(preferably with reference) for the estimation of univariate discrete unimodal
densities (with unknown mode)? Thanks in advance for your help.
Kind
2010 Jul 28
1
Plugin for XFS project quota
Hi,
I just finished writing a small plugin that reports XFS project quota in de
IMAP component of Dovecot (1.2, currently). It was written to fill the
needs of our organization but someone else might find this useful as well.
In its current form it's not suitable for inclusion in the generic quota
backend (see ?Drawbacks?).
Features:
- every mailbox/folder can have its own project ID;
-
2012 Jun 23
3
Hardware infrastructure for email system
Hi,
I'm currently (re-)planning my email setup and have been doing some
research. I have done some searches and read several threads in the
areas of my questions here. While there are some that come close I
haven't yet been able to get all my questions answered.
I currently run a postfix, dovecot & roundcube setup and have about 2000
active accounts. I have a separate SMTP server
2010 Jun 29
4
Can I use SGI''s kdb with a dom0 pv-ops kernel?
I asked this a few weeks ago but didn''t get a response, so at the risk of
being a nag, I''ll abbreviate and restate.
I know there are other Xen specific debuggers, but I want to know if there''s
any reason why SGI''s kdb, http://oss.sgi.com/projects/kdb, should not be
included in a dom0 pv-ops kernel?
While the patches apply cleanly and build, the result is that
2008 Aug 21
5
VM node won't talk to host
I am trying to mount the same partition from a KVM ubuntu 8.04.1 virtual
machine and on an ubuntu 8.04.1 host server.
I am able to mount the partition just on fine on two ubuntu host servers, they
both talk to each other. The logs on both servers show the other machine
mounting and unmounting the drive.
However, when I mount the drive in the KVM VM I get no communication to the
host
2013 Aug 04
1
10th anniversary of tinc 1.0
Hello everyone,
Today is exactly 10 years ago that tinc 1.0 was released. I would have hoped to
celebrate this by releasing 1.0.22 and 1.1pre8 today, but this will instead
happen in one week.
Tinc 1.1 is close to becoming stable, and I hope to release 1.1.0 before the
end of the year. The main features of tinc 1.1 are the improved security over
tinc 1.0, and a much nicer interface that makes it
2013 Aug 04
1
10th anniversary of tinc 1.0
Hello everyone,
Today is exactly 10 years ago that tinc 1.0 was released. I would have hoped to
celebrate this by releasing 1.0.22 and 1.1pre8 today, but this will instead
happen in one week.
Tinc 1.1 is close to becoming stable, and I hope to release 1.1.0 before the
end of the year. The main features of tinc 1.1 are the improved security over
tinc 1.0, and a much nicer interface that makes it
2000 Oct 31
2
need your help!!
I am looking for an application to run in windows which simulates a network over 2 computers each connected to the internet..... its gotta trick it into thinking they are connected as a network, Do you have a program that does this? or maybe do you know the name of one? if not can you tell me what this type of program is called? thank you very much :)
-------------- next part --------------
An