Hi,
Although Im dutch too, Ill write this in english. I got a similar problem
then the one on the helpforum. Ill paste my setup first
server tincd.conf
----
ListenPort = 8089
MyOwnVPNIP = 192.168.100.1/24
#VpnMask = 255.255.255.0
TapDevice = /dev/tap0
Passphrases=/usr/local/etc/tinc/passphrases
server tapdev
----
tap0 Link encap:Ethernet HWaddr FE:FD:C0:A8:6F:01
inet addr:192.168.100.1 Bcast:192.168.100.255
Mask:255.255.255.0
UP BROADCAST RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:24 errors:0 dropped:0 overruns:0 frame:0
TX packets:118 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
Interrupt:5
client toncd.conf
----
ConnectTo = server.dns
ConnectPort=8089
MyOwnVPNIP = 192.168.100.2/24
#VpnMask = 255.255.255.0
Passphrases=/usr/local/etc/tinc/passphrases/
TapDevice=/dev/tap0
client tap dev
----
tap0 Link encap:Ethernet HWaddr FE:FD:C0:A8:6F:02
inet addr:192.168.100.2 Bcast:192.168.100.255
Mask:255.255.255.0
UP BROADCAST RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:56 errors:0 dropped:0 overruns:0 frame:0
TX packets:28 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
Interrupt:5
both machines are firewall, have masquerading enabled, and have
portforwarding enabled 8089 on the server firewall to the server daemon,
and 655 on the client firewall to the client daemon .
in the logs I get this :
server :
-------
Oct 17 00:27:23 bill tincd[6197]: tincd 0.3.3 (Oct 16 2000
23:50:21) starting, debug level 12.
Oct 17 00:27:23 bill tincd[6197]: Generating 128 bits keys.
Oct 17 00:27:23 bill tincd[6197]: Ready: listening on port 8089.
Oct 17 00:27:29 bill tincd[6197]: Connection from
dhcp-dns.stuff (xxx.xxx.xxx.xxx):61119
Oct 17 00:27:29 bill tincd[6197]: Passphrase OK
Oct 17 00:27:29 bill tincd[6197]: Connection with
dhcp-dns.stuff (xxx.xxx.xxx.xxx) activated.
and when I kill it:
Oct 17 00:31:43 bill tincd[6197]: Got TERM signal
Oct 17 00:31:43 bill tincd[6197]: Terminating.
Oct 17 00:31:43 bill tincd[6197]: Total bytes written: tap 932, socket
3864; bytes read: tap 4036, socket 888.
client
------
Oct 17 00:51:29 germaine tincd[11373]: tincd 0.3.3 starting, debug level
0.
Oct 17 00:51:29 germaine tincd[11373]: Generating 128 bits keys.
Oct 17 00:51:29 germaine tincd[11373]: Ready: listening on port 655.
Oct 17 00:51:29 germaine tincd[11373]: Connected to
dns stuff (xxx.Xxx.xxx.xxx):8089
Oct 17 00:51:29 germaine tincd[11373]: Connection with
dns stuff(xxx.XXX.XXX.XXX) activated.
now, this all looks fine, but when I ping, I get nothing.. I do have
Oct 17 00:29:20 bill tincd[6197]: Sent 72 bytes to c0a86402
Oct 17 00:30:05 bill last message repeated 4 times
Oct 17 00:31:24 bill last message repeated 2 times
and
Oct 17 00:53:10 germaine tincd[11383]: Sent 72 bytes to c0a86401
Oct 17 00:53:55 germaine last message repeated 4 times
Oct 17 00:56:19 germaine last message repeated 2 times
on both client and server.. but ping doesnt pass, nor anything else...
any ideas?
my setup is based on a simulation I did at work with two non firewalled
pcs, and there it worked. you reckon the masquerading is in the way?
then again I tried to install both tincs directly on the firewall and I
got same results
any help would be appreciated.
regards
--
Jan Uyttersprot
--- quote
Software is like sex, it's better when it's free!!
http://www.linux.org
-
Tinc: Discussion list about the tinc VPN daemon
Archive: http://mail.nl.linux.org/lists/
Tinc site: http://ftp.nl.linux.org/pub/linux/tinc/