similar to: Gigabit Lan doesn't work

The 8168B (02) NIC works well except that it does not go into promiscuous mode despite advertising itself in that mode after being so directed with ifconfig. Unfortunately, the little box is destined to be an IDS monitor, so that function is essential. The board is an Intel Atom 330 run as x86_64, the nic is internal. We tried three drivers: the one in the 2.6.18-128.1.10.el5 kernel yields

Please consider adding the following features to sshd: 1. AlwaysDenyLogin - a setting that will result in always denying login regardless of the credentials given by the client. 2. LoginDelayTime - to specify a delay in milliseconds before the server responds to a client's login attempt. These would help to employ brute force bots. Regards

what is the most stable linux that we can build business on it, i mean the best linux a linux without problems . __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

Hi All! I have a some problem: On the my motherboard Intel DG45NB with Processor Box Intel Core 2 Duo E6300 , i see in the dmesg(log file): dmesg | grep CPU0 APIC error on CPU0: 00(60) or the sometime: dmesg | grep CPU1 APIC error on CPU1: 00(60) How can I fix this problem??? This Bug is my motherboard or the kernel??? The system good working is uptime... Without reboot... Other error in

Hi I've installed CentOS 5.2 (i386) in a computer with a DG33BU motherboard ... When I installed it it crashed because of ACPI issues. Searching Google I found that I need to turn ACPI off in order to successfully install CentOS, which I did. After a while I noticed that because of ACPI is off the Linux kernel finds, initializes and uses only 1 CPU core in the Q6600 quad core CPU that is

Hi, I have an intel mother board dg43b (http://support.intel.com/Products/Desktop/Motherboards/DG43NB/DG43NB-overview.htm) which have an on board lan interface. In default, it can't be activated after CentOS5.2 installed. I can't find any driver or information about how to activate this interface. Can anyone tell me how to work it out? Thanks, ango

Hello, Marvel Yukon Gigabit Ethernet is supported by CentOS ? -- -- Devel in Precio http://www.pas-world.com

Hello all, I want to learn about requirements if I want to protect gigabit network with ipfilter as transparent firewall. Which type of hardware is required to install FreeBSD + ipf (as transparancy ) . We use 3 gigabit ethernet to protection which type of gigabit ethernet carts are powerfull. Also, what about the NMBCLUSTERS , IPSTATE_SIZE and IPSTATE_MAX in ip_state.h. I want to collect all

Hi all, I am notice strange behaviour of samba in our mixed fastEthernet/gigabitEthernet enviroment. First of all let me to describe our situation. We have a samba server running debian unstable with 2.6.3 kernel installed. Server has a gigabit copper connection (tg3 driver) to the 100/1000 Megabit switch (3COM 4228G). Client is a WinXP/Linux workstation connected by ordinary 100 Megabit

Dear Xen Users, I have a rhel5 dom0 machine with four nics, two public and two private. My goal is to run two xen instances, a fully virtualized rhel4(with a custom kernel, hence the fully virtualized) and a paravirtualized rhel5. Each instance will need one public and one private nic with gigabit connectivity. At the moment I''m simply bridging two nics to each instance. Is this the

Hi honorable people! In self-education purposes only, I would like to ask is 35 Mbytes/sec bandwidth limitation of SMB/CIFS in Gigabit applications? I've try read large file (45GB) from server to client's dev/nul and don't get bandwidth greater than specified... But, using FTP or NFS I get REAL stable read speed at 80 MB/sec! Same picture in synthetic TCP tests. Why while SMB in

Hi, folks I installed Xen 3.3 on my Lenovo T400 notebook, via compiling source code. When I boot from the linux xen 2.6.18, the network fails start and xend fails too. The network adaptor is Intel 82567LM Gigabit Network Connection. Does anybody else get the same problem? I cannot figure it out whether this is caused by driver support of xen or faulty configuration. Need your help and thanks a

I sometimes get errors of this form: Error: cannot allocate vector of size 13.8 Gb I've also seen "Gb" used in R documents. Is "Gb" being used to refer to gigabyte? We usually refer to bytes and gigabytes when discussing memory usage, but the lowercase "b" more often refers to bits. According to Wikipedia: http://en.wikipedia.org/wiki/Gigabyte

Hello Xen users, I want to purchase some gigabit ethernet cards. Our local Fry''s is having a $5.99 special on Airlink gigabit PCI cards with the Realtek chipset. Any experiences with this chipset vis-a-vis xen that would preclude its use? Thanks for your advice, Mike Wright :m) _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com

Is there anyway to get gigabit networking for a fully virtualized guest? I''ve tried searching for this one, but all I get are results about gigabit networking for the host / dom0, nothing for domU. Thanks, Gordon _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Hello everyone. What's better for Asterisk: have 2 distinct 100Mb network cards in the system, one on the "internet" and one on the "local net" OR have one 1000Mb network card with 2 separate VLAN's set up? It's a difficult decision because 2 cards are using 2 IRQ's etc but a single 1000Mb card might generate more PCI interrupts and get me into different

Most manufacturers charge in excess of $80 to upgrade from a 10/100 switch to a 10/100/1000 switch built into the phone. The cost might have been in the chipset 5 years ago but I can get a 5 port gigabit switch for $30. What are most folks using for people that need gigabit to the desktop and don't want to run another cable? -Matt

Hi Folks, Is there any SIP FXS ATA with Gigabit ethernet bridge port, in the market ? -- Isamar Maia Cel. VIVO SSA: (55) 71-9940-2012 Cel. TIM SSA: (55) 71-9289-5128 Cel. Claro SSA: (55) 71-9146-8575 Fixo: (55) 71-4062-8688 Skype ID: isamar.maia "A vida ? muito curta para ser pequena" (Benjamin Disraeli) -------------- next part -------------- An HTML attachment was

My dd (sk98lin v7.09) supports 3c940 (Marvel/Syskonnect) which the stock v6.x drivers doesn't . Successfull tested on a Asus A-7N8X Deluxe with Marvell Gigabit Lan the dd is available at http://slackpkg.ath.cx/centos/disk/sk98lin/

Hello I am having a weird issue with a PCI-X Intel dual gigabit ethernet nic. While I am partially successful in pass thru with kvm, I have a weird issue with my pfsense freebsd vm. It see the two nics but gives them the same Mac address. I'm not sure if this is a pfsense bug or what. The nic works for everything but this Mac address issue. Long story short, I guess what I'm asking is