similar to: vigor 2920 problems

I'm in conversation with Draytek's pre-sales dept.............. Here's the most recent reply: <Hello, We really don't know of anyone who has run an Asterisk server on a Vigor2900. There are doubtless people around, but it's relatively rare. Most people don't run SIP servers. Regards,> All I want to know is, if I buy one of these routers, will it break my setup or

I have recently installed a test Asterisk server but am having problems getting this to work with a Vigor 2600V. I have no issues using X-Lite to connect to Asterisk but if I configure the 2600V, it registers correctly but I don't get any sound at all although calls do seem to connect. The 2600V works fine with FWD and other services so I suspect I am missing a setting but as a user have

I am unable to get a my Draytek working with our Asterisk server. I can make/recieve calls but get no audio. I have tried the various codecs at the Vigor end but still getting nothing. I looked at sip debug (below) but am new to Asterisk and don't really know what I am looking for. Asterisk works fine with XLITE so I know my installation is ok. Sip read: INVITE

I have been trying to read everything I can find on Sipura 2000 and Asterisk. I am trying to make the Sipura-2000 act as two analog lines off my asterisk. I have followed (what I believe) the example on http://www.voxilla.com/Article39.phtml and I still can't get my Sipura to register with my Asterisk server. I can re-config my Sipura to talk to fwd, or voice-pulse connect and it works

I may have found a source of an A-Ticked HFC 4BRI PCI adapter in Australia, and will be testing one next week if all goes well. I don't want to post the details of the reseller online unless invited to do so, so if nobody replies and says they are interested then I won't :) I'll follow up once I've tested it. Let me know if you want the details. James

Greetings list, Thanks to all who replied to my thread a few days ago "SIP devices with packet loss tolerance". One of the suggestions that came out of that thread was to replace routers at users' premises with ones that support QoS. I've used m0n0wall's QoS in the past with reasonable success, but it's quite a bulky and complex setup for deploying to remote sites which

Hi, I've got a client with two ADSL connections for redundancy. Is it possible to set up asterisk to connect to one SIP provider using both adsl connections and load balance between the two connections? Or to use one connection as the main one, and automatically fail over if the first connection drops? Or does this kind of thing need a serious network switch? Thanks Dan --------------

Hi, Does anybody else have problems like this. I'm in the UK with a 1mb ADSL service from Eclipse. I have a Draytek Vigour 2600 ADSL router. My * box is configured with a public IP address which is presented on one of the switch ports on the rear of the router. When there is some SIP activity, incoming mainly, towards my * box, the router will lockup after a short period?! I've tried

Hi all, I finally got my IPSec tunnel from my Fedora firewall system (running Shorewall 4.0.6) to a remote Draytek Router up-and-running, but I''m having difficulties directing traffic through the tunnel. From the output of "racoon -F -f racoon.conf" and the connection status page of the Draytek I can tell the tunnel is UP, but ping and traceroute requests to several hosts

Hi, Ok.. I know dual NAT is a problem for SIP.. ie. UA - NAT - Internet - NAT - Asterisk What about Multi-NAT where a dedicated public IP is mapped to the private IP of the asterisk box.. ie UA - NAT - Internet - Multi-NAT - Asterisk http://www.draytek.co.uk/support/kb_vigor_multinat.html Anyone tried it? Thanks..

Hi, We're installing an * box next week (pbxtra from fonality) and I'm trying to come up with a solution for remote users that want a phone in their home. I need VPN and QoS capability, wireless support would be a nice to have. Ethernet handoff is fine, i don't need integrated dsl or cable modem... I've been googling and cruising the list and can find bits and pieces

Hi, I have setup a IPSEC VPN using Openswan to connect a Draytek router to a CentOS 5.2/Shorewall 4.2.9 firewall. The VPN establishes OK but I''m getting a problem with packets from the left hand subnet getting masqueraded rather than routed down the IPSEC VPN as though they were going out onto the net. I''ve spent the last day searching Google and so far I''ve hit a

Hello, R-users,   I have a datafile with 37313 records and each record has 5 different measurements on the same variables. The format looks like this: treeID, VIG0, VIG1, VIG2, VIG3, VIG4 I was trying to convert the one row record to 5 rows record with format like this (treeID, MEASUREMENT, VIGOR). My code like this:   treeMeas<-matrix(data=0,nrow=(length(tree1$indivTree)*5), ncol=3)

Hi, My customer has a outdated firewall that is also presenting a NAT nightmare for getting the Asterisk server reachable from the internet. What firewalls work good with VOIP? I really want to steer away from any ALG supported firewall. I just want a good firewall that works well with Asterisk. Thanks, David Wathen -------------- next part -------------- An HTML attachment was scrubbed...

I'm trying to debug a NAT issue and I can't make up my mind if the problem is with my Vigor 2800 or Asterisk 1.6.2. I know the Draytek is alleged to suffer from nat 'issues' but I did not have the issue with 1.6.1 - so I'm wondering if something has changed? The Draytek offers 'NAT & Routed' on a single device - so my Asterisk sits on a Public IP, and I have a

Hai Peter, Chipping in here. > > > Hi Rowland, > > You are right about firewall boxes. At least Cisco ASA is a terribly > (over) complicated device. People who are not Cisco pros should be > warned. Stay away, you will just waste your time, get frustrated, and > get sleepless nights. > > I don't blame the Cisco ASA here. In my case, I hadn't much

Dear User, I got the following error running a regression quantile: > rq1<-rq(dep ~ ., model=TRUE, data=exo, tau=0.5 ); > summary(rq1) Erro em rq.fit.fnb(x, y, tau = tau + h) : Error info = 75 in stepy: singular design Any hint about the problem? Thanks a lot, ________________________________________ Ricardo Gon?alves Silva, M. Sc. Apoio aos Processos de Modelagem Matem?tica

Dear R-Users, How can I compute simple moving averages from a time series in R? Note that I do not want to estimate a MA model, just compute the MA's given a lenght (as excel does). Thanks ________________________________________ Ricardo Gonçalves Silva, M. Sc. Apoio aos Processos de Modelagem Matemática Econometria & Inadimplência Serasa S.A. (11) - 6847-8889 ricardosilva@serasa.com.br

Hola. Tengo que representar en un mapa, valores de proporciones de extranjeros con tarjetas de residencia en vigor, según nacionalidad y país de procedencia. Los datos son de este estilo Rumania Andalucía 0,200365823 Aragón 0,377192073 Asturias 0,205353012 I. Baleares 0,06592893 Canarias 0,03050312 Cantabria 0,190397393 Castilla-León 0,211670421 Castilla-La Mancha

Hello, Is there an utility for asterisk for codec conversion? I tried google but i haven' got anything. I am trying to initiate a call with G711 codec to asterisk and i would like asterisk to call a gateway with an g729 codec, therefore making a codec conversion from g711 to g729. I know chan_oh323 does it by specifying the OUT_CODEC variable, but chan_h323 does not. And i was wondering is