similar to: New install, console ends up garbled once dom0 is finished booting

Hi everyone Ok this is really strange. I''ve been messing around with Xen for the past few weeks on a 32bit test machine and CentOS 5.4 and it''s been working fine. Today I went into the office on a Sunday to install Xen on our server but I had a major problem. The server is a home-build with a Tyan s5211 motherboard with an Intel i3210w chipset CentOS 5.4 64bit installed and

Hi everyone Ok this is really strange. I''ve been messing around with Xen for the past few weeks on a 32bit test machine and CentOS 5.4 and it''s been working fine. At the weekend I went into the office to install Xen on our server but I had a major problem. The server is a home-build with a Tyan s5211 motherboard with an Intel i3210w chipset CentOS 5.4 64bit installed and

I am a newish Mac user. I have band-in-a-box 2008, which ran fine under wine in Linux. It seems to run fine under wine in os x, except that the fonts are wrong in several places, most notably in dialog windows. The font actually used is some kind of symbolic font, so it looks like hieroglyphics. It might be one of biab's fonts as some of the symbols are musical, but there are enough

For posterity's sake, this problem was solved by removing the "serial" command and restoring "console" to the default of 1, thus completely relying on the BIOS console redirection instead of having ISOLINUX write to and read from the serial port. Thanks to Peter for his help a while back. -----Original Message----- From: Syslinux [mailto:syslinux-bounces at zytor.com] On

All, Has anybody else experienced garbled voice between a phone using alaw/ulaw and one using iLBC? I have a Nokia E series phone with a preference to use iLBC and this works fine in Asterisk 1.2. However, since moving to 1.4 - I get garbled voice on Inbound (g711->iLBC). Outbound voice seems fine (iLBC->g711) though. It's not a 20/30ms framing issue as the phone uses 30ms

I'm having problems with the voicemail prompts. The beginning of each prompt is garbled. Prompts "edian mail" and "assword" can be recognized, but when it starts on the short phrases it is completely garbled. It is almost like the subsequent phrase starts before the current phrase finishes. I have isolated the LAN to the * box and the phones, so LAN congestion is

Hello, I have problem that menus on windows soft under wine are garbled (mojibake.) I'm Japanese and I've just started to use wine under CentOS5 because I want to use English-Japanese dictionary viewing software. Installing wine is fine both English and Japanese locale where wine related soft displays Japanese correctly even on menus. But my dictionary viewing soft under wine has

When I try to run a certain DirectX app, all of the fonts become garbled. A screenshot is at http://jackmcbarn.no-ip.org/login.png I've already tried setting HKEY_CURRENT_USER\Software\Wine\X11 Driver\ClientSideWithRender to N, which didn't appear to have any effect at all. Increasing the DPI increased the font size, but they were still garbled.

Whoops, left this message in my outbox. I managed to fix the problem. Apparently I was only copying 160 bytes (Frame Size) back into the audio stream when I should have been copying 320 (chars <-> shorts confused me there). Hence why I could hear myself yet it was distorted. Half the wav was missing =) To answer some of the other questions here, for any insight into what I'm doing:

We have a system that is designed with no VGA port, graphics card, or keyboard, only a serial console. We're trying to boot a Linux via ISOLINUX. The problem is that when ISOLINUX comes up, the screen is usually garbled. Not always; sometimes it's intact, sometimes it's completely blank. When it is garbled, it is NOT the garbled text of a wrong baud rate. Rather, it looks like

http://bugs.freedesktop.org/show_bug.cgi?id=10957 Summary: Garbled console text with XAA enabled Product: xorg Version: 7.1 Platform: Other OS/Version: All Status: NEW Severity: normal Priority: medium Component: Driver/nouveau AssignedTo: nouveau at lists.freedesktop.org ReportedBy:

Hello, I just bought a Snom-320 from ATAComm. I plugged it into my LAN, registered it with *, etc. All my other SIP gear is Sipura and works fine, both on the LAN and over the Internet. The new Snom seems like it can't process the audio from the handset mic. A steady tone is garbled, even on the LAN. I've contacted ATAComm, Snom and the company representing Snom in the US. So

I've been having random problems when I make long distance calls using either VoicePulse or Nufone. Sometimes the calls go through clear, and other calls (or even just part of a call) the person on the other end just hears garbled voice, or really broken up voice. Sometimes it lasts for only a few seconds, but other times it goes on for a few minutes until I give up on the call. At

I am having a problem with asterisk voice mail messages that seems to be intermittent. Though the problem occurs most of the time, on rare occasions it will work fine - rare enough that I can't pin down what it is that works. The problem is that voice mail message get played back garbled. Occasionally, I can make out moments of a voice or another sound that may be in the actual message,

Hello Just a sanity check. I'm seeing a garbled display with top. I rebuild kernel and world a couple times, I even rm -rf /usr/include to make sure I was up to date. Anybody else seeing this? Thanks, Eric

For some reason a couple weeks ago users began experiencing garbled audio in one direction when dialing out via our VoIP provider. This happened at multiple sites simultaneously. The VoIP provider doesn't think it's their problem. If I switch to another codec so that Asterisk transcodes everything is fine. On conference calls (where Asterisk gets in the middle to relay ulaw to all

I wrote an R wrapper function (phylpro) around a C function (Rphylpro). The first time I'm running my function, it runs with no errors. The second time I'm trying to run it, I get an error message with the first argument to .Call garbled. Set up: > dyn.load("Phylpro.so") > source("phylpro.R") > WinHalfWidth<-30 > permReps<-10 > breaks<-c(548,

Bugs item #12751, was opened at 2007-08-01 18:00 You can respond by visiting: http://rubyforge.org/tracker/?func=detail&atid=218&aid=12751&group_id=35 Category: Incorrect behavior Group: None Status: Open Resolution: None Priority: 3 Submitted By: Alex Fenton (brokentoy) Assigned to: Alex Fenton (brokentoy) Summary: text/unicode sample layout garbled on MSW Initial Comment: The

I recorded a television show using my HDHomeRun. The resulting file contains MPEG-2 video and AC3 audio. Specifically, ffmpeg2theora shows: Stream #0.0[0x1e0]: Video: mpeg2video, yuv420p, 1280x720 [PAR 1:1 DAR 16:9], 38810 kb/s, 59.92 tbr, 90k tbn, 119.88 tbc Stream #0.1[0x80]: Audio: ac3, 48000 Hz, 5.1, s16, 448 kb/s Pixel Aspect Ratio: 1.00/1 Frame Aspect Ratio: nan/1 When I feed it to

I've gotten the Wine 1.3.8 built on a MacBook Pro running Snow Leopard 1.6.5 and Apple's X11 XQuartz 2.3.6 (xorg-server 1.4.2-apple56) I managed to get most of the prerequisites built, and my final configure warning only contains the following: Code: configure: libv4l 32-bit development files not found. configure: libgphoto2 32-bit development files not found, digital cameras won't